• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.80.1-80.1
• /
• 2011

This study was carried out in order to estimate the effect of heat pump performance by use of thermal tank with 3 seperation plates which were able to divide thermal tank into 3 chambers that have different temperatures levels. For testing the effect of developed thermal tank which was installed for supplying the heat to the paprika greenhouse in Jinju city. The volume of thermal storage tank was designed for $110m^3$ which was able to cover 30% of heating capacity. The temperature difference was 3 degree Celcius between high temperature and low temperature when only heating circulation was made from heat pump to thermal tank. but 5.5 degree Celcius difference was made when heating circulation of heat pump to thermal thank and hot water supplying circulation of thermal tank to greenhouse was done simultaneously. As a result of this study showed that COP of heat pump was increased by 15% or more than that of using normal thermal tank because heat pump was able to take 3 ~ 5 degree Celcius lower thermal thank water constantly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.4
• /
• pp.359-369
• /
• 2006

This study aims deriving analysis the flow characteristic of kitchen hood system with using 3-D numerical analysis method and improving the system to expel pollutes more efficiently. This system is applied with $k-{\varepsilon}$ turbulent model and using incompressibility viscosity flow range and boundary condition which are related to Bossinesq approximation following density variation in control volume. To understand the flow characteristics of four models, this study only focuses on velocity field, temperature field, and concentration field varying with followings whether separation plate is set or not and the shapes of separation plates. The quantity of air, speed of exhaust fan and temperature and concentration of heating source are concerned as constant values.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.59-66
• /
• 1989

Single crystals of the superconducting Y-Ba-Cu oxide were grown by a flux technique. Stoichiometric mixture with excess BaO and CuOcontent was melted at 130$0^{\circ}C$, followed by fast cooling to 108$0^{\circ}C$ to prevent crystallizing of CuO. It was then reheated to 110$0^{\circ}C$ followed by being held at this temperature to control the number of nuclei, and cooled by 5$^{\circ}C$/hr to 80$0^{\circ}C$. This procedure was repeated with various compositions and crystals were obtained in cavity. Molten solution was seperated to two parts : the upper part of almost CuO and the rest of different composition. Appropriate composition of flux was 30mol% BaO and 70mol% CuO due to the seperation of molten solution. Single crystals have the habit of thin plate with good developed (001) crystal face, XRD, EDAX and single crystal X-ray investigations were carried out. The grown crystals have tetragonal structure with the lattice parameters a=b=3.84$\AA$, c=11.7$\AA$, and the space group P4/mmm. The crystal surface were observed by SEM.