• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.222-222
• /
• 2017

This study aimed to determine an optimal temperature of root zone for the chive cultivation in a greenhouse during the winter season that may raise the possibility of chive (Allium schoenoprasum L.) harvest any time year-round by reducing energy consumption. The maximum and minimum temperatures of root zone were 26.8 and $19.8^{\circ}C$ for the R-Z20, 28.3 and $23.6^{\circ}C$ for the R-Z25 and 22.4 and $14.3^{\circ}C$ for the control. The highest fresh weights of shoot and root, plant height, root length and stem diameter were observed in the R-Z20 treatment. There was no significant difference in the growth between the R-Z25 and control treatment. These results suggest that the optimal temperature of root zone is $20^{\circ}C$ for the chive cultivation in the greenhouse during winter season.

• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.7-12
• /
• 1998

Chestnuts(Castanea cretana, Eunki) were used for quality evaluations from the physiological and physicochemical points of view during storage under different temperatures and relative humidities for 8 months. Quality criteria included spouting, rotting, weight loss, and the changes in moisture, total sugar, reducing sugar, and total vitamin C of the stored sample. Sprouts(roots) were developed in about 2 months in all stored samples which had been mixed with sawdust(50% moisture) and stored under the conditions of 2∼25$^{\circ}C$ and 62∼95% RH. The sprout development was more significant in the storage temperature of Pit(9${\pm}$6$^{\circ}C$, 80${\pm}$5% RH, PT)and room(16${\pm}$7$^{\circ}C$, 85${\pm}$10% RH, RT) than low(3${\pm}$1%, 80${\pm}$5% RH, LT)and ambient(14${\pm}$11$^{\circ}C$, 67${\pm}$5% RH, AT). The rates of rotting and weight loss were appreciable in the order of PT, AT, RT and LT, and those of LT were 1∼2%. The use of wet sawdusts resulted in the increase of moisture contents in stored samples, thereby causing the rotting phenomena. Some chemical components of stored samples were found liable to the changes according to storage conditions, that is; total sugars showed a decreasing tendency along with a temporary increase during storage, and both reducing sugar and vitamin C were similarly accumulated in the samples stored at low temperature conditions. The results indicated that long-term storage of chestnuts will be possible in either cases of the application of low temperature following sprout-inhibition treatment or the use of lower temperature than 0$^{\circ}C$ to suppress its sprouting during storage.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1442-1444
• /
• 2001

A new low-temperature poly-Si TFT employing a counter-doped lateral body terminal is proposed and fabricated, in order to enhance the stability of poly-Si TFT driving circuits. The LBT structure effectively suppresses the kink effect by collecting the counter-polarity carriers and suppresses the hot carrier effect by reducing the peak lateral field at the drain junction. The proposed device is immune to dynamic stress, so that it is suitable for low voltage and high speed driving circuits of AMLCD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.280-284
• /
• 2011

Silicon carbide (SiC)-based gas sensors can be operated at very high temperatures. So far, catalytic metal-schottky diodes respond fast to a change between a reducing and an oxidizing atmosphere. Therefore SiC diodes have been suggested for high temperature gas sensor applications. In this work, the effect of reactivity of the catalytic surface on the 4H-SiC sensor-structures in 375 K~775 K have been studied and some fundamental simulations have also been performed.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3001-3006
• /
• 2008

Recently, the internal combustion engines have focused on reducing both the CO2 emissions in order to cope with severe regulations for greenhouse effect. Therefore, various new technologies have been developed in many countries. Among them, the cooling system is spotlighted because it has great effect on fuel efficiency. However, the present engine cooling system is almost same as one of the 50 years ago. The needs for high performance and compact size make it important to improve engine cooling system, down-sizing and control method of coolant flow. Thus, low fuel consumption technology such as control and synthetic management of cooling system was necessary to satisfy with these needs. In this study, we applied electric thermostat to improve the fuel economy. The fuel consumption was compared after driving FTP-75 mode on both conditions which were with a conventional wax thermostat and with a electric thermostat. The coolant temperature of opening the electric thermostat is higher.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.55-69
• /
• 2016

Significant efforts are being devoted in mitigating the urban heat island effect, and extensive green roofs are an option for mitigation. The purpose of this study was to compare the surface temperature, vegetation types, and plant species on an extensive green roof. Test beds were created in May 2015, and the surface temperature was monitored from June to August. The test beds comprised polyculture and monoculture. Polyculture was divided into three types, and monoculture comprised eight plant species. An extensive green roof is effective in reducing temperature by forming a shade and preventing sunlight from falling on the surface of buildings, which mitigates the urban heat island effect. Consequently, the surface temperature of the green roof and that of concrete during summer reduced from $17.8^{\circ}C$ to $7.3^{\circ}C$. The temperature reduction was greater on using polyculture than on using monoculture, but monocultures of Sedum takesimense, Hemerocallis dumortieri, Allium senescens, Aster yomena, Belamcanda chinensis, and Aster koraiensis also produced good results. The temperature reduction effects of Polygonatum odoratum var. pluriflorum f. variegatum, Phlox subulata, and Thymus quinquecostatus var. japonica were excellent compared with those of concrete but were less than those of other plant species. Careful attention is needed for the management of extensive green roofs. Studies on the plant species and types of extensive green roof should continue to mitigate the urban heat island effect.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.265-272
• /
• 2015

In this study, a method to reduce temperature rise due to hydration in mass concrete is investigated. It is to use retarder (glucose) for reducing heat of hydration and to use calcium silicate hydrate (C-S-H) for compensating the retardation effect due to its role as a nucleation seed. For this purpose, the temperature rise of cement paste due to hydration was measured and the effect of using both C-S-H and glucose on setting and 28-day compressive strength of mortar specimens was investigated. According to the experimental results, using C-S-H and glucose caused the reduction in the maximum temperature but accelerated the time to reach the maximum temperature compared to that of retarded cement paste using glucose. In addition, using C-S-H and glucose did not show significant effect on 28-day compressive strength of mortar specimens, indicating that the method shown in this study can be a successful alternative to control maximum temperature rise in mass concrete.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.549-555
• /
• 1989

The effect of high temperature aging on the meat tenderness improvement was studied, and also the effect of salt, pyrophosphate and succinic anhydride on binding characteristics of restructed beef were compared. At high temperature aging, shear force value decreased and myofibrillar fragmentation index increased as the aging progressed. From the electronic microscopic observation, the morphological change of myofibril appeared much faster when the meat was aged at high temperature. Added salt increased TBA values and rupture strength while reducing cooking loss. Increase in pyrophosphate decreased rooking loss and Increased rupture strength and TBA value. When salt and pyrophosphate were combined, the effects were somewhat additive. Added succinic anhydride increased cooking loss and hardness and decreased color rating, acceptability rating and adhesiveness, but cohessiveness was not significantly different from control group containing salt and pyrophosphate. The results suggest that high temperature aging have greater improving effect of meat tenderness of Korean native male cattle compared to low temperature aging and addition of succinic ahydride in combination with salt and pyrophosphate reduce binding ability of restructured beef.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.4
• /
• pp.68-78
• /
• 2021

In order to solve the increasing deterioration of the energy shortage problem, ground-source heat pump (GSHP) systems have been widely installed. The control method is a significant component for maintaining the long-term performance and for reducing operation cost of GSHP systems. This paper presents the measurement and analysis results of the cooling performance of a GSHP system using capacity control with outdoor air temperature. For this, we installed monitoring equipments including sensors for measuring temperature, flow rate and power consumption, and then monitored operation parameters from July 9, 2021 to October 2, 2021. From measurement results, we analyze the effect of capacity control with outdoor air temperature on the cooling performance of the system. The average performace factor (PF) of the heat pump was 6.95, while the whole system was 5.54 over the measurement period. Because there was no performance data of the existing GSHP system, it was not possible to directly compare the existing control method and the outdoor air temperature method. However, it is expected that the performance of the entire system will be improved by adjusting the temperature of cold water produced by the heat pump, that is, the temperature of cold water on the load side according to the outside air temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.476-481
• /
• 2016

Steam power generation is used to produce electricity through a generator that is connected to a steam turbine. As a result, the surface temperature of the deaerator is $70^{\circ}C$during the summer season, the surface temperature of the storage tank is $67^{\circ}C$, and the air temperature is $50^{\circ}C$. This environment is inappropriate for workers and instruments. Workers adjacent to the deaerator and storage tank in particular feel higher temperatures because of the radiative heat transfer effect. Therefore, we optimized the cooling conditions by computational analysis. Case 1 is the current shape of the power plant, Case 2 has additional insulation, and Case 3 has a radiation shield. Flow is caused by a temperature difference between the heat sources in the wall, and hot air is trapped in the right upper end. Based on the temperature contours and the maximum temperature of the surfaces, Case 2 was found to be the most efficient for reducing radiative heat transfer effects.