• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.653-657
• /
• 2009

Nitrous oxide is a typical greenhouse gas which is produced from various organic or fossil fuel combustion processes as well as chemicals producing plants. $N_2O$ has a global worming potential of 310 times that of $CO_2$ on per molecule basis, and also acts as an ozone depleting material in the stratosphere. However, its removal is not easy for its chemical stability characteristics. Most SCR processes with several effective reducing agents generally require the operation temperature higher than $450^{\circ}C$, and the catalytic conversion becomes decreased significantly when NOx is present in the stream. Present experiments have been performed to obtain basic design data of actual application concerning the effects of $SO_2$ and $NH_3$ on the interim and long term activities of $N_2O$ reduction with CO over the mixed metal oxide (MMO) catalyst derived from a hydrotalcite-like compound precursor. The MMO catalysts used in the experiments, have shown prominent activities displaying full conversions of $N_2O$ near $200^{\circ}C$ when CO is introduced. The presence of $SO_2$ is considered to show no critical behavior as can be met in the $NH_3$ SCR DeNOx systems and the effect of $NH_3$ is considered to play as mere an impurity to share the active sites of the catalysts.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2008

The causes of salt accumulation in soils of plastic film houses nearby Sumjin river estuary in Mokdo-ri($127^{\circ}46'E\;35^{\circ}1'N$), Hadong, Gyeongnam, Korea were investigated in 2006. With chemical properties soils and water analyzed and fertilization status monitored, the study showed that mean salt concentration of soil was much higher at EC $4.3\;dS\;m^{-1}$ than the Korean average (EC $2.9\;dS\;m^{-1}$) in 2000s for plastic film house's soil with exchangeable Na $0.8\;cmol^+\;kg^{-1}$ and water-soluble Cl $232\;mg\;kg^{-1}$, and then might result to salt damage in sensitive crop plants. Salt concentration of ground water used as main irrigation water source contained very high EC with corresponding value of $2.6\;dS\;m^{-1}$. Particularly, increase of EC value was directly proportional with the increased pumping of ground water used as a water-covering system in order to protect the temperature inside plastic film houses from the early winter season. High Na and Cl portion of ions in water might had contributed to the specific ion damage in the crops. Secondly, heavy inputs of chemicals and composts significantly increased the accumulated salts in soil. Conclusively, salt accumulation might had been accelerated by use of salted-groundwater irrigation and heavy fertilization rate. To minimize this problem, ensuring good quality of irrigation water is essential as well as reducing fertilization level.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.553-559
• /
• 2004

To improve quality as a food source and functional properties of traditional fermented soybean paste (Doenjang), the Korean herb medicines (group I ∼ IV) extracted at 121$^{\circ}C$ for 2.5 hours were used as brine sources. Capsule Meju were fermented in cool brines with three different concentration (group A, B and C) of the extracts at room temperature for 3 months in large earthenware jars. The effect of traditional soybean Doenjang (refer as DHM below) supplemented with the extract of herb medicines on the food quality and chemical characteristics were examined. General composition of DHM (moisture 58.2%∼61.9%, pH 5.32∼5.56, total acidity 3.07∼3.70 ml, salt 11.7∼13.9%) did not differ from those of control (moisture 61.9%, pH 5.50, total acidity 3.25 ml, salt 12.6%). Concentration of reducing sugar, crude protein, crude lipid and amino type nitrogen were higher in DHM than those of control without addition of the extracts. Water insoluble-brown index showed no difference by the extracts. However, the former had higher water soluble-brown index than the latter, and within the DHM, groups I and II were higher than groups III and IV. Lightness values (L) of Hunter color index in groups I and II were 24.32 and 31.04, respectively. Redness values (a) of all DHMs were lower than that of control. Yellowness value (b) of groups III and IV were similar to that of control group, and Hunter b values of group I and II were lower than that of control.

• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.333-337
• /
• 2001

The effect of roasting of Omija (Schizandra chinensis Baillon) on the physicochemical properties and the sensory quality of the extract was investigated in order to improve the quality of Omija beverage. The response surface methodology was introduced to optimize the roasting condition of Omija based on the sensory quality of the extract. The titratable acidity, the soluble solid content and the reducing sugar content of the extract increased with a mild roasting, but decreased with an excessive roasting. Prolonged roasting at high temperature decomposed red pigment making the color of the extract lighter, less red and less yellow. A mild roasting of Omija improved the sensory quality of the extract, and the highest sensory quality of the extract was provided with the roasting at $180^{\circ}C$ for 10 min, indicating the optimum roasting condition of Omija. The extract of the roasted Omija was superior in sensory properties to that of the unroasted one.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.286-293
• /
• 2020

In this study, we tried to verify the correlation of the amount of combustible industrial by-products, household waste used as fuels on cement sintering process and the amount of NOx, and CO, harmful components in the exhaust gas. The analysis uses coal as natural fuel, soft plastics (plastics with properties that tend to be scattered by wind, such as vinyls), hard plastics (plastics with properties that are not scattered by wind, such as PETs, wate rubbers), and reclaimed oils as alternative fuels. Utilizing the response surface analysis (RSM) technique using the process data of 2019, such as the fuel input and combustion temperature of a domestic A cement manufacturer's sintering facilities as independent variables, and the NOx, and CO emissions to the stack as dependent variables. Correlation was analyzed. As a result, it was confirmed that the impact on the emission material differs for each waste. In particular, it was analyzed that the hard plastics increase the CO emission but have an excellent effect of reducing NOx.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.162-168
• /
• 2000

The influence of phenolsulfunate concentrations on electroplating characteristics and electrochemical behaviors was investigated with a viewpoint of electrolyte aging using the circulation cell and potentiostate And comparison of tinplate coating appearance such as glossiness and Image clarify has been also studied with varying of phenolsulfonic acid (PSA) solutions. As the aging of electrolyte proceeded, the limiting current density was moved to a lower current density region by the limitation of mass transfer, and higher phenolsulfunate concentrations resulted in the narrower optimum current density range and deterioration of coating surface of tinplates. The difference of the limiting current density was not remarkable with increasing electrolyte temperature. Thus the electrolyte aging was attributed to the limitation of thermally-activated process such as mass transfer of reducible ions. It has also been considered that the accumulation of phenolsulfonate suppressed normal electrotinning reaction by reducing the mobility of stannous ions, taking into account of the smaller effect of electrolyte aging. Experiments showed similar polarization behavior between the electrolyte of high phenolsufonate solution and the aged one, which comes to conclude that the accumulation of phenolsulfonate is one of the major causes of electrolyte aging.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2004

The extraction of platinum group metals such as Pt, Pd and Rh from spent automobile catalyst has been investigated by leaching in HCl solutions using $HNO_3$ or NaOCl as a oxidant. The effect of type and amount of oxidant, reaction time and pulp density on the extraction of platinum group metals was examined. Platinum group metals were recovered by the cementation method using aluminum as a reducing agent. The extraction ratio was higher when NaOCl was used as a oxidant. The optimum leaching conditions were obtained to be: HCl 8 M, the amount of NaOCl 1.4 mole, leaching temperature $90^{\circ}C$, leaching time 180 minutes, pulp density 400g/L. Under the optimum conditions, the extraction of Pt, Pd and Rh were 96.1%, 93.6% and 77.3%, respectively. With the addition of 2.0g of aluminum which corresponds to 28 equivalent the reduction were 98% for Pt. 98.8% for Pd and 65.3% for Rh, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.89-95
• /
• 2022

In this study, glassy carbon coating was performed on the graphite using a phenolic resin and a curing agent was mixed with ethylene glycol as an additive to form the uniform surface. The phenolic resin was dried and cured under the environments of hot air, then converted into a glassy carbon layer by pyrolysis at 500~1,500℃. FTIR, XRD, SEM analysis, and density/porosity/contact angle measurement were performed for characterization of glassy carbon. The pyrolysis temperature for high-quality glassy carbon was optimized to be about 1,000℃. As the content of the additive increased, the effect of reducing surface defects on the coated surface, reduction of porosity, increase of contact angle, and increase of density were investigated in this study. The method of forming a glassy carbon coating layer through an additive is expected to be applicable to graphite coating and other fields.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.86-91
• /
• 2022

The manure made of chaff and sawdust as litter was collected separately at a cowshed of a livestock farm in Andondg city. The fermentation efficiency of excreta is greatly influenced by the type and characteristics of litter and a factor to be considered for reducing N and P, the causes of eutrophication. Changes in weight with temperature and constituents of sample were examined using TG-DTA and XRF, respectively. NO₂^-, NO₃^-, and PO₄^3- ions and NH₄⁺, T-P and T-N eluted from manure by rain were analyzed using ion chromatograph and UV/Vis spectrometry, respectively. As a result, the fermentation efficiency of excreta in sawdust manure is three times higher as compared with chaff manure. The higher the fermentation efficiency, ammonia nitrogen was highly de-nitrogenated and organic phosphorous were also changed into phosphorous ions. Furthermore, phosphorous ions can be removed by transforming insoluble salts such as calcium phosphate (CaHPO₄·3H₂O) and struvite (NH₄MgPO₄·6H₂O) with addition of Ca and Mg.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.202-209
• /
• 2015

In this study, we investigated the cumulative effect of low temperature on bud dormancy release and bud break characteristics in 'Campbell Early' grapevine (Vitis labruscana B.) cuttings grown in water culture. Additionally, we observed the development of buds while exposed to low temperatures in an attempt to improve our understanding of dormancy and bud break. The shoots were collected 120 days after full bloom (DAFB; leaf abscission period), and the accumulated chill unit (CU) value was calculated by reducing the temperature to $7.2^{\circ}C$ at 125 DAFB. The rate of bud break was 100% in shoots collected at 150 DAFB, The period until the first bud break was two times longer than in the shoots collected 165 DAFB, and bud break speed was significantly reduced. These results indicate that buds are released from endodormancy after 165 DAFB, because at this point the bud break was complete (bud break rate 100%) and it occurred in a very short time period. During this period, when the low-temperature accumulated value was 321h and 442CU according to the CH and Utah models, respectively. Furthermore, the survival rate of main buds decreased rapidly after 165 DAFB, and survival rate of accessory buds was maintained at more than 90% without seasonal differences. The rate of flower bud formation of main buds was much higher than in accessory buds (1:0.23) before the release from endodormancy at 150 DAFB. The final ratio of accessory buds to main buds was high, 1:1.54, at 255 DAFB. Correlation analysis of each investigated factor revealed that bud survival rate and bud formation rate were related only for the main buds, and there was a close relationship between the survival rate of main bud and time. In addition, the survival rate of main buds was positively correlated to the rate of flower bud formation.