• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.308-317
• /
• 2012

Reactive processing, such as reactive hot pressing (RHP) and reactive spark plasma sintering (R-SPS), is effective densification method to prepare $ZrB_2$-based ultra high temperature ceramics (UHTCs). The present paper reviewed some typical reactive processing of $ZrB_2$-based UHTCs. All the reactions from the starting materials in the reactive processing are thermodynamically favorable, which generate enough energy and driving force for the densification of the final products under a relatively low temperature. Besides, compared with non-reactive processing, anisotropic $ZrB_2$ grains, such as $ZrB_2$ platelets, can only be obtained in the reactive processing, resulting in an improvement of the mechanical properties.

• 한국염색가공학회지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2004

The dyeability of cotton fabrics treated with liquid ammonia was investigated using low-temperature and high-temperature reactive dyes. From the results of dyeing rates of direct dye, the inversion time was shown at 600 hours at $40^{\circ}C$, and however it was shown at 10 minutes at $80^{\circ}C$. This was applied to reactive dyeings. In the low-temperature reactive dyes, the color strength of the fabrics treated with liquid ammonia was lower than that of mercerized fabrics. By contrast, in the high-temperature reactive dyes, the color strength of the fabrics treated with liquid ammonia was higher than that of mercerized one.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.149-152
• /
• 2009

Recent trends show an increased usage of 'colored concrete', a inorganic pigmented concrete mix, especially in smalll to large scale buildings. However, due to lack of varieties, current usage of colored concrete is limited to the one or two simple color of the time in construction work. so, this study is to investigate the properties of concrete adding temperature reactive pigment. The results of the experiment, the basic material characteristics of concrete such as of compressive strength and slump is affected by the amount rate of adding the temperature reactive pigment. And, it showed the excellent color expression and changing with temperature reactive pigment.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.654-664
• /
• 2017

The temperature profiles upon high speed impact of reactive structural materials were analyzed. A two color pyrometer, which included high-speed camera, spectral splitter, and band pass filters, was utilized to measure transient temperature profiles during and after reactive metal samples impacted into steel plate with velocities of 1600~1700 m/s. The spatial temperature distribution was analyzed from the ratio of spectral radiances at two different wavelength in infrared zone, i.e. 700 and 900 nm. The measured temperatures were calibrated with black body source. Two different types of metal samples, namely aluminum and nickel, were employed to understand reaction behavior upon the impact of samples in ambient condition. According to our experiments, the Ni sample appeared to barely react with ambient air producing an instant small fireball, while Al sample reacts violently with air generating a relatively prolong fireball.

• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.27-37
• /
• 2020

Low temperature dyeing properties of wool with reactive dyes and acid dyes were investigated for the feasibility study of their application to hair dyeing. The low temperature(30℃, 40℃) dyeing achieved light depth of shade in wool dyeing and reactive dyeing exhibited relatively higher color strength and chroma values than acid dyeing. Leveling agent slightly improved the levelness of the wool dyeing and the leveling properties of dyed wool at low temperature were good to excellent, irrespective of the dyes applied. Color loss during the repeated shampooing was in the range of 9.6~22.2% for reactive dyes and -7.4~31.5% for acid dyes and in some cases, the color fastness to shampooing was reasonable level. The overall experimental results showed that the application of low temperature wool reactive dyeing to hair dyeing is sufficiently feasible in terms of dyeability and color fastness to shampooing.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.808-813
• /
• 2009

Indium nitride thin films were deposited by the radio-frequency reactive magnetron sputtering method. The indium target was sputtered by the mixture flow ratio of $N_2$ to Ar, 9:1. The effects of growth temperature on the structural, optical, and electrical properties of the films were investigated. With increasing the growth temperature, the crystallinity of the films was improved, and the crystalline size was increased. The energy bandgap for the film grown at $25^{\circ}C$ was 3.63 eV, and the bandgap showed an increasing tendency on the growth temperature. The carrier concentration, Hall mobility and electrical resistivity of the films depended significantly on the growth temperature and the maximum Hall mobility of $32.3\;cm^2$/Vsec was observed for the film grown at $400^{\circ}C$.

• 한국염색가공학회지
• /
• 제4권4호
• /
• pp.73-80
• /
• 1992

The influence of four types of reactive dyes that are different in reactive group on silk fabric were investigated at three different temperatures, 5$0^{\circ}C$, 7$0^{\circ}C$, 9$0^{\circ}C$ and the pH range from 7.0 to 11.0. The amount of absorption and fixation showed the optimum condition. The damage of silk during dyeing was determined by the change of physical properties. The results are given as follows: 1. The amount of dye fixed on fabrics at constant pH varied upon the reactivity of dyes. The affinity of dyes for silk fabrics were in order of Lanasol>Procion>Remazol>Cibacron. 2. The percentage of dye fixation on fabrics showed different tendency with temperature. The dye fixation of Cibacron and Procion was decreased above 7$0^{\circ}C$ because of the influence of hydrolysis. The dye fixation of Lanasol and Remazol was increased with the increase of temperature. This showed that temperature did not affect on hydrolysis. 3. The tensile strength of dyed fabric decreased with increasing pH and temperature owing to high temperature and alkaline damage on silk fabric. 4. The optimum conditions of dyeing silk with reactive dyes were as follows: Cibacron -7$0^{\circ}C$, pH 9.0, Procion-5$0^{\circ}C$, pH 7.0, Remazol-5$0^{\circ}C$, pH 8.0, and Lanasol-9$0^{\circ}C$, pH 9.0.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.487-490
• /
• 2008

Temperature programmed oxidation (TPO) is used to characterize coke species deposited on commercial nickel catalyst, C11-PR during propane pre-reforming. Propane pre-reforming performed under various condition, S/C from 1.5 to 2.5 and temperature from $350^{\circ}C$ to $450^{\circ}C$. There are three kinds of coke species detected by TPO: (i) reactive coke, (ii) coke deposited on metal site and (iii) coke deposited on acid support. Coke deposited on metal and support are minimized although reactive coke is generated at temperature of $400^{\circ}C$ and S/C of 2.0. Reactive coke is expected to remove easily below temperature of $200^{\circ}C$. Therefore, optimized pre-reforming condition for propane is $400^{\circ}C$ and S/C of 2.0.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.50.3-50
• /
• 2001

Nonlinear feedback control scheme for reactive distillation column has been proposed. The proposed control scheme is derived in the framework of Nonlinear Internal Model Control. The product compositions and liquid and vapor flow rates in sections of the reactive distillation column are estimated from selected tray temperature measurements by an observer. The control scheme is applied to example reactive distillation column in which two products are produced in a single column and the reversible reaction A + B = C + D occurs. The relative volatilities are favorable for reactive distillation so that the reactants are intermediated boilers between the light product C and the heavy product D. Ideal physical properties, kinetics and ...

• 자연과학논문집
• /
• 제9권1호
• /
• pp.9-17
• /
• 1997

염색가공 폐액중의 반응성 염료에 대한 탈색효과를 검토하기 위하여 산화력이 강한 오존을 사용하여 염료의 농도, 처리용액의 pH, 처리용액의 온도조건 등을 변화시켜 가며 오존의 농도와 피로시간에 대한 염료의 탈색과정에 대하여 연구하였다. 오존의 처리 능력은 염료 폐액의 농도가 높아지면 그만큼 오존이 많이 필요하게 되므로 처리 속도도 떨어졌다. 반응성 염료의 탈색 속도는 진한 색상인 blue가 제일 늦었으며 옅은 색상일수록 빠르게 탈색이 진행되었다. 오존의 처리 시간이 경과함에 따라 반응성 염료의 색상은 중간색을 거쳐 무색으로 변하여 색상이 파괴됨을 보였다. 반응성 염료는 색상에 따라 약간의 차이는 있지만 알칼리 영역에서보다는 산성영역에서 더 빠르게 탈색이 진행되었다. 오존처리 온도가 낮을수록 탈색속도가 빠르게 나타났지만 그 차이는 적었다.