• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.341-346
• /
• 2000

This experimental study investigated the flow motion of the working fluid for various diameters of miniature thermosyphons and the performance characteristics for the various amount of the working fluid. The temperatures of condenser surface were measured and visual observations were conducted. The test results show that some fluid condensed in the tube diameters of 0.18cm and 0.22cm is not returned to the evaporator section due to capillary effect so that large temperature gradients are measured. To enhance returning the working fluid, one copper wire of 0.5mm diameter was inserted and the test results show good performance. When the liquid charge was less than 10% in volume dry-out was occurred fur the thermosyphons of the inner diameter of 1.8mm and 2.2mm.

• 동력기계공학회지
• /
• 제3권3호
• /
• pp.14-21
• /
• 1999

The wave nature of heat conduction has been developed in situations involving extreme thermal gradients, very short times, or temperatures near absolute zero. Under the excitation of a periodic surface heating in a finite medium, the hyperbolic and parabolic heat conduction equations and the damped wave equations in heat flux are presented for comparative analysis by using the Green's function with the integral transform technique. The Kummer transformation is also utilized to accelerate the rate of convergence of these solutions. On the other hand, the temperature distributions are obtained through integration of the energy conservation law with respect to time. For hyperbolic heat conduction, the heat flux distribution does not exist throughout all the region in a finite medium within the range of very short times(${\xi}<{\eta}_l$). It is shown that due to the thermal relaxation time, the hyperbolic heat conduction equation has thermal wave characteristics as the damped wave equation has wave nature.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.627-632
• /
• 2002

The paper considers acoustic analysis of the shock absorbing muffler within a rotary compressor. The internal space of the compressor is modelled as a combination of cavities and pipes. A simple one-dimensional impedance approach is used fur the acoustic analysis in the low frequency range, with ignoring the effects of gas flow and temperature gradients that are closely related to power efficiency of the compressor. Using the similarity between the vibration isolator and the shock absorbing muffler, the source strength transmissibility is newly proposed as a performance measure of the muffler and its validity is supported by power analysis. Some Important muffler design rules obtained are; (1) a muffler cavity and its opening throat should be used as a pair, (2) a long thin throat is desirable for high frequency noise isolation, (3) a large muffler cavity should be used with care since it shortens the working frequency range of the muffler. The rules were applied to redesign a compressor muffler currently in use, and a significant improvement was achieved by simply attaching a throat to the outlet holes of the muffler.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.238-241
• /
• 2007

We present an innovative method of multi-physics application involving energetic materials. Energetic materials are related to reacting flows in extreme environments such as fires and explosions. They typically involve high pressure, hish temperature, strong non-linear shock waves, and high strain rate deformation of metals. We use an Eulerian methodology to address these problems. Our approach is naturally free from large deformation of materials that makes it suitable for high strain-rate multi-material interaction problems. Furthermore we eliminate the possible interface smearing by using the level sets. We have devised a new level set based tracking framework that can elegantly handle large gradients typically found in reacting gases and metals. We show several work-in-progress applications of our algorithm including the Taylor impact test, explosive venting and additional confined explosion problems of modem interest.

• 한국결정학회지
• /
• 제1권1호
• /
• pp.8-13
• /
• 1990

수열육성법에 의해 인공적으로 황수정을 육성하였다. 대형의 보석용 황수정 육성기술을 확립하기 위하여 원료, 종자결정, 용제, 발색제 및 온도구배의 결정육성 요소를 상세히 고찰하였다. 구조동정, 발색, crystal form, 거시 및 미세 결함의 관찰 및 흡수 spectrum 분석을 통하여 육성된 결정의 품질을 평가하였다. 결정 육성 결과 발색이 우수하고 결함이 적은 길이 205nm, 폭 58mm, 두께 35m(무게 1kg)의 대형 황수정 육성에 성공하였다.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.281-286
• /
• 2004

The oxide scales formed on Ni-18W(at.%) coating that was electrodeposited on steel were investigated using XRD, SEM and TEM. The oxide scales consisted mainly of an outer NiO layer, and an inner thick ($NiWO_4$+NiO) mixed layer. The unoxidized coating below the oxide scale was rich in Ni and depleted in W, owing to the consumption of Wand the resultant Ni enrichment. The oxidation resistance of Ni-18W coating was poorer than that of the TiN coating, due to the formation of nonprotective NiWO$_4$. During oxidation, Ni and the substrate element of Fe diffused outward, while oxygen inward, according to the concentration gradients.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.57-62
• /
• 2005

The frost heaving pressure can be a problem for weakening of the railway roadbed material. This study was initiated to investigate the soils frost heaving pressure and physical characteristics(Liquid limit, permeability, SEM analysis) resulting from freezing and freezing-thawing cycle process. Therefore, upon freezing a saturated soil in a closed-system from the top, a considerable pressure was developed. Weathered granite soils, sandy soil were used in the laboratory freezing test which sometimes subjected to thermal gradients under closed-systems. The frost heaving pressure arising within the soil samples and the temperature of the samples inside were monitored with elapsed time. The degree of saturation versus heaving pressure curve is also presented for weathered granite soil and the maximum pressure is closely related to this curve. Based on the laboratory test results, fine-grained soils with strong attractive forces between soil grains md water molecules, and additional water is attracted into the pores leading to further volume changes and ice segregation.

• The Korean Journal of Ecology
• /
• 제11권3호
• /
• pp.109-122
• /
• 1988

The foret vegetations of Daedunsan provincial park area in Korea were classified into eight communities of Acer mono-Zelkova serrata, Lindera erythrocarpa-Cornus controversa, Carpinus tschonoskii, Quercus variabilis, Quercus serrata, Carpinus laxiflora, Rhododendron schlippenbachii-Quercus mongolica and Rhododendron mucronu-latum-Pinus densiflora by the Z-M method. By two dimensional analysis of temperature, moisture gradients, the eight communities were grouped into four vegetation types: cove forest dominated with Zelkova serrata and Cornus controversa, hornbeam forest with Carpinus tschonoskii and Carpinus laxiflora, oak forest with Quercus variabilis, Quercus mongolica, Carpinus laxiflora, Carpinus tschonoskii, Zelkova serrta and Pinus densiflora community was made from the analysis of actual vegetation map by the phytosociological classification, environmental conditions and human interferences.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.251-258
• /
• 2003

The early -age behavior of base restrained reinforced concrete (RC) walls is analyzed using a three-dimensional finite element method in this study. After calculating the temperature and internal relative humidity variations of an RC wall, determination of stresses due to thermal gradients, differential drying shrinkage, and average drying shrinkage is followed, and the relative contribution of these three stress components to the total stress is compared. The mechanical properties of early-age concrete, determined from many experimental studies, are taken into consideration, and a discrete reinforcing steel derived using the equivalent nodal force concept is also used to simulate the cracking behavior of RC walls. In advance, to Predict the crack spacing and maximum crack width in a base restrained RC wall, an analytical model which can simulate the post-cracking behavior of an RC tension member is introduced on the basis of the energy equilibrium before and after cracking of concrete.

• Animal cells and systems
• /
• 제2권2호
• /
• pp.209-216
• /
• 1998

The invasion of Ambrosia artemisiifolia in the Ukrainian Carpathians Mts. and the Transcarpathian Plain in Central Europe was reconstructed on the basis of floristic records. The first spontaneous occurrence was dated from the beginning of the 1940s. Within the next 55 year period, the distributional spread speed of the species was of 67.6 $km^2/y$ (by the average data). The occupied area by A. artemisiifolia in the range of the studied areas is about $3716.5km^2$ now. The features of behavior of the invader and the habitat preference were determined. The frequency of occurrence by sociologic-ecological classification was carried out. The generalized model of correlations among the gravitation, the active temperature sum and the disturbance gradients and the frequency of occurrence of the species was presented. The scheme of the invasion stages of A. artemisiifolia is reflected in the population status changes of the species during the areal dynamics.