• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.259-266
• /
• 1998

In the SI engine, the improvement of combustion stability is important not only for the fuel consumption rate but also for the emission control at idling of engine. Thus the engine speed fluctuation at idle operation mainly comes from cyclic variation of combustion in the SI engine. In this syudy, the improvement of combustion stability for the SI engine at idle condition by the cooling water temperature, duty ratio of ISC, spark ignition timing as well as the reducement of the harmful exhaust gas emission was discussed.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.67-71
• /
• 2009

본 논문에서는 우리나라에서 동일한 환경에 설치되어 있는 247.5kW bulk형 모듈과 a-Si형 모듈의 6월 발전량을 조사 분석하여 기상조건(일조량, 평균기온, 강수량, 운량, 풍속 등)과의 관계를 분석하고 최근 지구온난화 등으로 인한 기후변화에 따라 보다 고효율적인 모듈 산정방안을 제시하였다.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.75-82
• /
• 2009

본 논문에서는 우리나라에서 동일한 환경에 설치되어 있는 247.5[kW] bulk형 모듈과 a-Si형 모듈의 6월 발전량을 조사 분석하여 기상조건(일조량, 평균기온, 강수량, 운량, 풍속 등)과의 관계를 분석하고 최근 지구온난화 등으로 인한 기후변화에 따라 보다 고효율적인 모듈 산정방안을 제시하였다.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.89-95
• /
• 2010

This paper deals with design method of proportional-integral(PI) and feedforward controller for obtaining precise temperature and high energy efficiency of oil cooler system in machine tools. The compressor's speed and opening angle of an electronic expansion valve are controlled to keep reference value of temperature at oil outlet and superheat of an evaporator. Especially, the feedforward controller is added to suppress temperature fluctuation under abrupt disturbances. Through some experiments, the suggested method can control the target temperature within steady state error of ${\pm}0.l^{\circ}C$ and maximum overshoot $0.2^{\circ}C$ under abrupt disturbances.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.227-232
• /
• 2023

In this study, complex admittance as a function of temperature and frequency was measured to analyze the important relaxation properties of lead scandium niobate, which is physically important, although it is not an environmentally friendly electrical and electronic material, including lead. Lead scandium niobate was synthesized by heat treating the solid oxide, and the conductance, susceptance and capacitance were measured as a function of temperature and frequency from the temperature dependence of the RLC circuit. The relaxation characteristics of lead scandium niobate were found to be affected by contributions such as grain size, grain boundary characteristics, space charge, and dipole arrangement. As the temperature rises, the maximum admittance and susceptance increase in one direction, but the resonance frequency decreases below the transition temperature but increases after the phase transition.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.179-186
• /
• 2015

In this study, the actual energy consumption of the secondary side District Heating System (DHS) with different hot water supply temperature control methods is compared. The two methods are Outdoor Temperature Reset Control and Outdoor Temperature Predictive Control. While Outdoor Temperature Reset Control has been widely used for energy savings of the secondary side system, the results show that the Outdoor Temperature Predictive Control method saves more energy. In general, the Outdoor Temperature Predictive Control method lowers the supply temperature of hot water, and it reduces standby losses and increases the overall heat transfer value of heated spaces due to more flow into the space. During actual energy consumption monitoring, the Outdoor Temperature predictive Control method saves about 6.6% of energy when compared to the Outdoor Temperature Reset Control method. Also, it is found that at partial load condition, such as during daytime, the fluctuation of hot water supply temperature with Outdoor Temperature Reset Control is more severe than that with Outdoor Temperature Predictive Control. Thus, it proves that Outdoor Temperature Predictive Control is more stable even at partial load conditions.

• 해양환경안전학회지
• /
• 제23권5호
• /
• pp.497-512
• /
• 2017

2011~2012년 보령연안 수온의 시공간적 변동특성을 장기 연속수온관측 자료를 이용하여 분석하였다. 수온은 반일 또는 일일의 단주기 변동이 전 계절에 탁월하고 그 진폭은 하계와 춘계에 크고 추계에 작다. 수온과 기온의 연변동 진폭은 기온 $12.9^{\circ}C$, 수온 $10.9^{\circ}C$로 기온이 더 크며, 연변동 최고위상은 기온 8월 2일, 수온 8월 22일로 기온이 20일 앞선다. 수온의 연변동 진폭은 원산도와 대천항 연안에서 가장 크다. 수온변동 중 일일주기는 대천항과 무창포항, 반일주기는 원산도 주변 협수로에서 탁월하며, 대천천 하구는 천해조 비율이 높다. 표층수온과 기온은 대체로 풍향 변동에 따라 변동한다. 하천수가 방출되면 수온은 상승 후 하강 또는 하강 후 상승한다. 수온 탁월주기는 0.5일, 1.0일, 15일 주기와 7~10일 전후이다. 수온변동특성에 따라 해역을 분류하면 (1)원산도 남동연안의 혼합수역 (2)삽시도~용도, 장고도~삽시도, 장고도~안면도 남쪽의 서쪽 외해수역 (3)용도~독산의 남쪽 외해수역 (4)송도~대천항~무창포항의 조간대 연안수역으로 구분된다.

• 한국환경생태학회지
• /
• 제31권2호
• /
• pp.135-151
• /
• 2017

2015년 10월부터 2016년 4월까지 주 1회 원주천의 조류를 관찰하여 각 수조류의 도래에 미치는 기온의 조건을 알고자 하였다. 원주천에 도래하는 수조류의 개체수는 기온의 변화와 반비례하여 기온이 낮아짐에 따라 개체수는 증가하였고, 최저기온을 보인 16차(27-Jan) 조사에서 최고개체수를 기록하였다가 기온이 상승함에 따라 감소하였다. 원주천 수조류의 전체 개체수는 인근 저수지와 하천의 결빙율에 비례하여 결빙율이 높아질수록 개체수가 증가하였고 낮아질수록 감소하였다. 기온변화에 따른 종별 개체수의 상관성을 알아보기 위하여 1차(15-Oct)에서 27차(18-Apr)에 이르는 월동기 전체의 상관관계(1~27상관)를 비롯하여 최저기온을 기록한 16차를 기준으로 1차(15-Oct)에서 16차(27-Jan)의 월동 전반기의 상관관계(1~16상관), 16차(27-Jan)에서 27차(18-Apr)에 이르는 월동 후반기의 상관관계(16~27상관)를 알아보았다. 대부분 월동 수조류는 기온에 대해 음의 상관성을 보였으나 쇠백로(Egretta garzetta), 민물가마우지(Phalacrocorax carbo) 및 왜가리(Ardea cinerea)는 양의 상관성을 보였다. 흰뺨검둥오리(Anas poecilorhyncha)가 기온의 변화에 대한 가장 높은 상관성(1-16상관, 7D/H3A, (r=-0.960, P<0.000000001)을 보였으며, 전체 월동 수조류는 모든 상관분석(1~27상관(r=-0.942, P<0.01), 1~16상관(r=-0.947, P<0.01), 16~27상관(r=-0.958, P<0.01))에서 4D/LA에 가장 높은 상관성을 보였다. 각각의 수조류와 기온에 대한 상관성은 종마다 기온(AT, HT, LT)과 기간(1D~7D)의 조건에 대해 각각 다르게 나타났다. 대부분의 종이 최고기온보다는 최저기온과의 상관성이 큰 것으로 나타났으며, 기온이 하강하는 월동 전반기에는 4일~7일의 기온에, 월동 후반기에는 1일~3일의 기온에 높은 상관성을 보였다.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3874-3897
• /
• 2023

A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High-Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next-generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds-averaged Navier-Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1184-1192
• /
• 2004

Experimental investigations were carried out in an atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane gas. The objective of this study was to obtain the phase-resolved gas temperatures at different phases of the oscillating pressure cycle during unstable combustion. CARS temperature measurements were made at several spatial locations under lean premixed conditions to get the information on temperature field within the combustor. Also the effect of incomplete fuel-air mixing on phase-resolved temperature fluctuation was investigated. Results including phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs) were provided in this paper. Temperature PDFs gave an insight on the flame behavior. And strong correlation between phase-resolved temperature profile and pressure cycle was observed. Results of the phase-resolved high temperature gave an additional information on the perturbation of equivalence ratio at flame as well as the effect of mixing quality on NOx emission characteristics.