• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.105-107
• /
• 2012

This study was conducted to investigate the strength development of fly ash concrete using the strength development estimation for the ready mixed concrete for construction of nuclear reactors. The findings are as follows. First, the higher the curing temperature becomes, the shorter the setting time becomes. In addition, the compressive strength also increased as the curing temperature gets higher. The apparent activation energy derived from ASTM C 1074 showed 34.75 KJ/mol. The results of concrete strength estimation confirmed that Gompertz model formula has good accuracy.

• 한국통신학회논문지
• /
• 제22권1호
• /
• pp.185-192
• /
• 1997

We propose a method of paramete estimation using order-of-magnitude analysis for optimal boundary smoothing in Mean Field Annealing(MFA) technique in this paper. We previously proposed two boundary smoothing methods for consistent object representation in the previous paper, one is using a constratined regulaization(CR) method and the other is using a MFA method. The CR method causes unnecessary smoothing effects at corners. On the other hand, the MFA method method smooths our the noise without losing sharpness of corners. The MFA algorithm is influenced by several parameters such as standard deviation of the noise, the relativemagnitude of prior ter, initial temperature and final temperature. We propose a general parameter esimation method for optimal boundary smoothing using order-of-magnitude analysis to be used for consistent object representation in this paper. In addition, we prove the effectiveness of our parameter estimation and also show the temperature parameter sensitivities of the algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.559-567
• /
• 2018

In this paper, we propose a new load forecasting method for smart air conditioning (A/C) based on the modified thermodynamics of indoor temperature and the unbiased finite memory estimator (UFME). Based on modified first-order thermodynamics, the dynamic behavior of indoor temperature can be described by the time-domain state-space model, and an accurate estimate of indoor temperature can be achieved by the proposed UFME. In addition, a reliable A/C load forecast can be obtained using the proposed method. Our study involves the experimental validation of the proposed A/C load forecasting method and communication construction between DR server and HEMS in a test bed. Through experimental data sets, the effectiveness of the proposed estimation method is validated.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.729-736
• /
• 2013

Knowledge of a power semiconductor's operating temperature is important in circuit design and converter control. Designing appropriate circuitry that does not affect regular circuit operation during virtual junction temperature measurement at actual operating conditions is a demanding task for engineers. The proposed method enables virtual junction temperature estimation with a dedicated modified gate driver circuit based on real-time measurement of a semiconductor's quasi-threshold voltage. A simulation was conducted before the circuit was designed to verify the concept and to determine the basic properties and potential drawbacks of the proposed method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1269-1271
• /
• 2009

We had proposed fast thermal stress estimation methodology for the components on system board when the system is stationary within specific ambient air temperature. Now, we will propose one efficient thermal stress estimation methodology, block adaptive filtering methodology, for the FPD electronic system board which is enclosed by mechanical cover.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.270-277
• /
• 2006

Inverse radiation problems were solved for estimating boundary temperature distribution in a way of function estimation approach in an axisymmetric absorbing, emitting and scattering medium, given the measured radiative data. In order to reduce the computational time fur the calculation of sensitivity matrix, automatic differentiation and Broyden combined method were adopted, and their computational precision and efficiency were compared with the result obtained by finite difference approximation.. In inverse analysis, the effects of the precision of sensitivity matrix, the number of measurement points and measurement error on the estimation accuracy had been inspected using quasi-Newton method as an inverse method. Inverse solutions were validated with the result acquired by additional inverse methods of conjugate-gradient method or Levenberg-Marquardt method.

• Smart Structures and Systems
• /
• 제20권1호
• /
• pp.11-22
• /
• 2017

The long-term effect of ambient temperature on bridge strain is an important and challenging problem. To investigate this issue, one year data of strain and ambient temperature of a long-span cable-stayed bridge is studied in this paper. The measured strain-time history is decomposed into two parts to obtain the strains due to vehicle load and temperature alone. A linear regression model between the temperature and the strain due to temperature is established. It is shown that for every $1^{\circ}C$ increase in temperature, the stress is increased by 0.148 MPa. Furthmore, the extreme value distributions of the strains due to vehicle load, temperature and the combination effect of them during the remaining service period are estimated by the average conditional exceedance rate approach. This approach avoids the problem of declustering of data to ensure independence. The estimated results demonstrate that the 95% quantile of the extreme strain distribution due to temperature is up to $1.488{\times}10^{-4}$ which is 2.38 times larger than that due to vehicle load. The study also indicates that the estimated extreme strain can reflect the long-term effect of temperature on bridge strain state, which has reference significance for the reliability estimation and safety assessment.

• 한국기후변화학회지
• /
• 제5권4호
• /
• pp.323-329
• /
• 2014

Since the terrain of Korea is complex, micro- as well as meso-climate variability is extreme by locations in Korea. In particular, air temperature of agricultural fields is influenced by topographic features of the surroundings making accurate interpolation of regional meteorological data from point-measured data. This study was carried out to compare spatial interpolation methods to estimate air temperature in agricultural fields surrounded by rugged terrains in South Korea. Four spatial interpolation methods including Inverse Distance Weighting (IDW), Spline, Ordinary Kriging (with the temperature lapse rate) and Cokriging were tested to estimate monthly air temperature of unobserved stations. Monthly measured data sets (minimum and maximum air temperature) from 588 automatic weather system(AWS) locations in South Korea were used to generate the gridded air temperature surface. As the result, temperature lapse rate improved accuracy of all of interpolation methods, especially, spline showed the lowest RMSE of spatial interpolation methods in both maximum and minimum air temperature estimation.

• 대한공간정보학회지
• /
• 제23권4호
• /
• pp.11-16
• /
• 2015

시공간적 기온정보는 지구온난화와 기후변화의 이해에 있어서 중요한 기상요소이다. 본 연구에서는 인공위성 원격탐사로부터 획득된 공간적으로 균질한 지표면 정보를 이용하여 우리나라 지상기온 평가 알고리즘을 개발하였다. LST(Land Surface Temperature), NDWI(Normalized Difference Water Index), NDVI(Normalized Difference Vegetation Index)를 독립변수로 하는 지상기온 추정을 위한 다중회귀모형을 제안하고, 우리나라의 지역기후변화를 고려하기 위하여 온난시즌과 한랭시즌에 대한 모형의 회귀상수 및 회귀계수를 도출하였다. 개발된 기온 추정 알고리즘에 의해 산출된 온난 및 한랭시즌의 기온정보는 지상관측기온과 비교하여 우수한 상관관계를 보였고, $3^{\circ}C$ 미만의 RMSE와 거의 0에 가까운 BIAS로 매우 높은 일치성을 보였다. 따라서 인공위성 지표면 원격탐사자료를 활용하고 온난 및 한랭시즌의 구분을 적용한 기온 평가 알고리즘은 우리나라의 지역기후를 평가하는데 있어서 간략하고 유용한 수단이 될 수 있으리라 기대된다.

• 한국기후변화학회지
• /
• 제6권4호
• /
• pp.277-281
• /
• 2015

A Chinese cabbage is one of important vegetables which accounts for more than 60 percent of leaf vegetable. However, cultivation area and yield of Chinese cabbage are steadily decreasing recently. Because meteorological changes destabilize the balance of Chinese cabbage, we need to study on meteorological factors affecting estimation of Chinese cabbage yield. So we conducted a panel analysis using mean temperature, maximum temperature, minimum temperature, precipitation and sunshine's duration from August to November for estimation of Chinese cabbage yield. As the results, we found that if the mean temperature of September increase by $1^{\circ}C$ the amount of production of Chinese cabbage per unit area was increased by 348.6 kg/10a. We also found that the mean temperature of October increased by 174.8 kg/10a, that of November 148 kg/10a, the difference between the maxium temperature and the minimum temperature of October equals 443.3 kg/10a. However, we found that the difference between the maximum temperature and the minimum temperature of November decreased 274.1 kg/10a.