• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2011년도 학술발표회
• /
• pp.35-35
• /
• 2011

• Asian Journal of Atmospheric Environment
• /
• 제9권3호
• /
• pp.214-221
• /
• 2015

This study considers mean skin temperature to calculate expected temperature using the new heat balance model because the skin temperature is the most important element affecting the heat balance outdoors. For this, we measured the skin temperature in high temperature condition of Korea and applied it to calculate the expected temperature. The calculated expected temperature is compared with the result calculated using previous models which use the estimated mean skin temperature by considering metabolic rate only. Results show that the expected temperatures are higher when measured mean skin temperature is applied to the model, compared to the expected temperature calculated by applying mean skin temperature data calculated using metabolic rate like previous models. The observed mean skin temperature was more suitable for outside conditions and expected temperature is underestimated when mean skin temperature calculated by the equation using metabolic rate is used. The model proposed in this study has a few limitations yet, but it can be applied in various ways to facilitate practical responses to extreme heat.

• Elastomers and Composites
• /
• 제32권5호
• /
• pp.309-317
• /
• 1997

Estimation of the dielectric properties of insulating silicone rubbers added reinforcing fillers $(SiO_2,\;0{\sim}140phr)$ are very important to investigate the polymer structure. The characteristies of the dielectric absorption in insulating silicone rubbers were studied in the frequency range from 30Hz to 1MHz at the temperature range from $0{\sim}170^{\circ}C$. In the case of non-filled specimen, the dielectric loss is due to the syloxane which is the main chain of silicone rubber at the low temperature below $50^{\circ}C$ and the frequency at 330Hz, and is due to methyl and vinyl radical over the frequency of 1MHz. It is confirmed that the methyl radical or the vinyl radical becomes thermal oxidation at the high temperature over $100^{\circ}C$ and then the dielectric disperssing owing to the carboxyl radical Is appeared. In the case of filled specimen, the dielectric constant is in creased with the additives of reinforcing fillers due to the effect of interfacial polarization explained by MWS(Maxwell-Wagner-Sillars)'s law. The dielectric loss is decreased by the disturbance of reinforcing fillers that is permeated between networks.

• 한국추진공학회지
• /
• 제16권3호
• /
• pp.82-89
• /
• 2012

추진제탱크 내의 극저온 추진제는 발사체의 비행 과정동안 주변으로부터 에너지를 흡수하여 온도가 상승한다. 비행 종료 시점에 있어 터보펌프 입구 요구조건 이상으로 온도가 상승된 추진제는 사용할 수 없는 잔류추진제로 남게 된다. 본 논문에서는 극저온 추진제 상층부의 온도변화를 살펴보기 위하여 추진제 표면 근처에서의 열전달계수를 구해보고자 하였다. 추진제 상층부의 열전달을 전도로 단순화하여 열전달계수를 예측하는 방법을 제시하였다. 이를 통해 얻어진 추진제 상층부의 온도를 시험데이터와 비교하여 열전달계수 예측 방법의 적용 가능성을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.576-585
• /
• 2017

Dynamic thermal rating (DTR) of overhead transmission lines can provide a significant increase in transmission capacity compared to the static thermal rating. However, the DTR are usually estimated by the traditional thermal model of overhead conductor that is highly dependent on the solar, wind speed and wind direction data. Consequently, the estimated DTR would be unreliable and the safety of transmission lines would be reduced when the solar and wind sensors are out of function. To address this issue, this study proposed a novel thermal model of overhead conductor based on the thermal-electric analogy theory and Markov chain. Using this thermal model, the random variation of conductor temperature can be simulated with any specific current level and ambient temperature, even if the solar and wind sensors are out of function or uninstalled. On this basis, an estimation method was proposed to determine the DTR in the form of probability. The laboratory experiments prove that the proposed method can estimate the DTR reliably without measured solar and wind data.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.121-127
• /
• 2012

본 연구에서는 플라이애시를 치환한 시멘트 모르터의 양생온도에 따른 강도증진을 검토하기 위하여 등가재령방법에 의한 강도증진해석을 실시하였다. 플라이애시를 30% 치환한 시멘트모르터의 겉보기활성화에너지를 ASTM C 1074 방법에 의하여 산정한 결과 34.75KJ/mol로 산정되었고, 이를 토대로 Plowman 모델과 Gompertz 모델을 이용하여 해석한 결과 해석치가 측정치를 양호하게 추정함을 알 수 있었고 특히 Gompertz 모델식이 보다 양호한 추정 정밀도를 갖는 것으로 확인되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.802-808
• /
• 2011

극저온 온도 구조 재료의 중요한 기계적 성질 중 하나는 파괴 인성이다. 파괴 인성 시험 방법의 규격화에 대한 연구는 극저온 구조 요소의 개발과 함께 매우 중요한 문제가 되고 있다. 특히 용접부의 경우 극저온 환경 하에서 사용할 때 불안정파괴를 유발할 수 있기 때문에 용접부의 각 미세조직에 따른 기계적 성질 평가가 중요하다. 본 연구에서는 STS-316L 모재와 용접재를 대상으로 액체질소(77K), 액체헬륨(4K), 293K 온도에서 제하컴플라이언스법과 예민화 열처리한 소형화된 시험편 대상으로 파괴인성평가 실험을 수행하였다.

• Ocean and Polar Research
• /
• 제36권1호
• /
• pp.77-85
• /
• 2014

The quality control of ocean observations data is becoming a major issue as real-time observational data and information services have increased recently. Therefore, it is necessary for oceanographic instruments to calibrate. In this paper, we first introduce the CTD calibration system and traceability. Next, CTD calibration procedures and estimation of uncertainty of measurement are described. The expanded uncertainty (k = 2) of the temperature, pressure and conductivity are 0.$0.003^{\circ}C$, $6.0{\times}10^{-5}$ and 0.006 mS/cm respectively. Finally, the excellence of CTD calibration and its measurement capability has been proven by comparing the inter-calibration result of KIOST and Sea-Bird Electronics (SBE). CTD calibration residuals are less than ${\pm}0.0001^{\circ}C$, ${\pm}0.001$ MPa, ${\pm}0.0001$ S/m for SBE 3plus temperature sensor, SBE 19plus pressure sensor and SBE 4C conductivity sensor respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.709-716
• /
• 2011

추진제탱크 내의 극저온 추진제는 발사체의 비행 과정동안 주변으로부터 에너지를 흡수하여 온도가 상승한다. 비행 종료 시점에 있어 터보펌프 입구 요구조건 이상으로 온도가 상승된 추진제는 사용할 수 없는 잔류추진제로 남게 된다. 본 논문에서는 극저온 추진제 상층부의 온도변화를 살펴보기 위하여 추진제 표면 근처에서의 열전달계수를 구해보고자 하였다. 추진제 상층부의 열전달을 전도로 단순화하여 열전달계수를 예측하는 방법을 제시하였다. 이를 통해 얻어진 추진제 상층부의 온도를 시험데이터와 비교하여 열전달계수 예측 방법의 적용 가능성을 확인하였다.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.585-595
• /
• 2007

Representative impacts and effectiveness of surface meteorological observation data assimilation were examined in order to use wind resources estimation around southern coastal area of the Korean Peninsula. The data used in study are observational wind and temperature data at 5 and 41 sites of Regional Meteorological Offices and Automatical Weather Systems, respectively. Observation wind speed data tends to show small effective radius with limited area. Especially assimilation impacts of data observed at peninsula type sites like Yeosu play only around the inside of the peninsula. This limited effective radius for wind speed is caused by the strong correlation between topography and wind speed. And the efficient radius for surface air temperature is larger than that of wind. Data assimilation for observational air temperature is useful to increase the accuracy of wind energy estimation. However assimilation of wind data requires special care in its application due to high sensitivity of topographical complexity.