• 한국해양학회지:바다
• /
• 제8권4호
• /
• pp.357-368
• /
• 2003

남극 세종기지 앞에 위치한 마리안 소만의 여름 수층 구조과 부유물질 분산기작을 이해하기 위해 빙벽 앞에서 CTDT 연속측정을 하였으며, 측정기간 동안의 조석, 부유물질농도, 유속, 그리고 기상요인도 함께 분석되었다. 45 시간동안 1시간 간격으로 측정된 연속 수층 특성 분포에 의하면, 수심 0∼20 m에는 저온$.$저염$.$고탁도의 혼합 표층수가 존재하였고, 수심 20∼40 m에 고온$.$고염$.$저탁도의 최대수온층인 맥스웰 만 유입수가 나타난다. 그 아래의 수심 40∼70 m에는 주변 해수에 비해 저온$.$고탁도의 아빙하성 유출수인 중층 플름(빙하기저부)이 위치한다. 마지막으로 수심 70 m 이하에 나타나는 저층수는 저온$.$고염$.$저탁도의 특성을 보였다. 늦여름 (2 월초)에 연안의 높아진 설선에서 녹아 소만으로 유입하는 담수의 특성은 유입지역의 특성(지형, 빙하조건, 퇴적물의 구성 등)에 따라 수온과 부유물질농도에서 차이를 보였으며, 바람이 거의 불지 않는 측정시기 동안에는 저염$.$고탁도의 표층 플름이 유입지역에 제한적으로 나타났다. 지속적으로 강한 바람이 불 경우, 빙벽 앞에서 육성기원의 혼탁한 담수성 플름, 저온의 중빙하성 용승수/조수빙하 융빙수 그리고 맥스웰 만 유입수가 혼합되면서 표층에 혼합층(저온$.$저염$.$고탁도)이 발달하였다. 소만의 강수는 단기간 빙하성 유출 증가의 가장 큰 요인이며, 중빙하성 용승수의 발생은 조수빙하의 상태와 강수량이 크게 좌우하였다. 특히 많은 양의 강수로 인해 아빙하성 중층 플름의 유출량이 커지면서 중층 이하의 수심에 저염화를 초래하였다. 그러나 입자가 거의 없을 정도로 깨끗한 중앙 빙벽에서 나오는 중빙하성 용승수와 중층 플름의 유입량이 클지라도, 낮은 부유물질농도로 인해 육성기원 입자의 소만 퇴적율은 작을 것이다.

• 한국가축번식학회지
• /
• 제22권4호
• /
• pp.425-435
• /
• 1998

본 연구는 핵이식 효율을 증진시키기 위하여 소의 핵이식에 있어서 MII 의 탈핵난자의 활성화 방법과 공핵란으로써 개별배양과 그룹배양된 수정란을 사용하여 할구분리시 발견할수 있는 할구의 크기별로 대ㆍ소로 구분하여 핵이식에 미치는 영향을 비교하여 다음과 같은 결론을 얻었다. 1. 핵이식에 있어 MII의 탈핵난자에 5$\mu$M ionomycin 에서 5분 처리후 2.0 mM DMAP 을 4시간동안 처리구, 탈핵 후 체외성축으로부터 39~43시간에 2.0 mM DMAP 올 4시간동안 처리구와 탈핵후 체외성숙으로부터 39~42시간에 실온에 3시간 두어 활성을 유도한 처리구에서 융합율은 각각 68, 74.7와 72.8%를 보여 유의적인 차이를 나타내지 않았으며, 배반포기배로의 발달율에 있어서도 10.0, 14.3와 9.0%로써 처리구간의 유의적인 차이는 보이지 않았다. 하지만 핵이식 후 7일째 배반포기 배로 발달한 수정란의 할구수에서는 각 처리구 별로 79.2개, 73.4개 그리고 53.2개로 체외성숙으로부터 39~42시간에 실용에 3시간 두어 활성화를 유도한 처리구가 다른 처리구에 비하여 유의적으로 낮게 나타났다 (P＜0.05). 2. 수정후 90시간 개별 배양 또는 그룹배양된 수정란의 평균할구수는 11.1 개로 같게 나타났으며 할구분리시 할구의 크기는 평균 46.8, 46.6$\mu\textrm{m}$로 나타났으며, 두 그룹 모두 46$\mu\textrm{m}$를 기준으로 large 와 small 로 나누었을 때 개별배양에서는 할구의 크기가 42.0, 50.9$\mu\textrm{m}$로 측정되었으며, 그룹배양에서는 41.6, 50.6$\mu\textrm{m}$로 측정되었다. 수정후 114시간 개별 및 그룹배양된 수정란의 평균할구수는 16.8개와 17.6개로 나타났으며, 할구분리시 할구의 크기는 평균 39.3, 38.7$\mu\textrm{m}$로 나타났다. 두 그룹 모두 38$\mu\textrm{m}$ 를 기준으로 Large 와 small로 나누었을 때 개별배양에서는 할구의 크기가 42.5, 35.2$\mu\textrm{m}$로 측정되었으며, 그룹배양에서는 42.1, 34.8$\mu\textrm{m}$ 로 측정되었다. 3. 핵이식 수정란의 세포융합율에 있어서 수정 후 90시간 개별배양된 수정란의 small 과 large 의 할구를 공핵체로 사용한 처리구에서 69.2 와 72.3%, 그룹배양된 수정란의 small 과 large의 할구를 공핵체로 사용한 처리구에서는 71.6와 76.3%의 융합율을 보여 유의적으로 차이를 나타내지 않았으며, 핵이식 수정란의 배반포기배로의 발달율에 있어서도 각 각 11.1, 10.2, 12.2 그리고 13.0%의 발달율을 보여 유의적인 차이를 보이지 않았다. 4. 수정 후 114 시간 개별배양된 수정란으로부터 분리된 small과 large의 할구를 공핵체로 사용한 처리구에서 핵이식 수정란의 세포융합율에 있어서 각각 71.0, 71.4, 69.9 및 77.1% 의 융합율올 보여 유의적인 차이를 나타내지 않았으며, 핵이식 수정란의 배반포기배로의 발달율에 있어서도 각각 11.4%, 8.0%, 17.2% 그리고 12.9% 의 발달율을 보여 유의적인 차이를 보이지 않았다. 이상의 결과로 보아 핵이식 수정란을 효율적으로 생산하기 위하여 수핵난자의 세포질에 ionomycin 과 DMAP 의 혼합처리로 탈핵난자의 활성화를 유도하는 것이 효율을 증진시킬 수 있었다고 본다. 또한 공핵수정란을 수정 후 90시간과 114시간 개별 배양하여 할구를 공핵체로 핵이식에 이용하였을 때도 그룹배양에 비하여 효율이 떨어지지 않음을 알 수 있었으며, 수정란의 할구 크기의 차이가 핵이식 수정란의 생산효율에 영향을 미치지 않음을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 유기물자원화
• /
• 제1권1호
• /
• pp.103-113
• /
• 1993

우리나라에서 년간 3,367만톤(1991년) 배출되는 생활쓰레기의 28% 이상이 주방폐기물로 통칭되는 음식찌꺼기, 채소류등으로 구성되는데 수분함량이 75~85%로 높고 발열량 낮아 혐기성 소화에 의한 처리법은 폐기물의 안정화 및 메탄가스 회수를 통한 효율적인 자원화가 가능하여 매우 실용적인 것으로 고려된다. 그러나, 주방폐기물은 셀룰로즈, 단백질등의 복잡한 고분자 고형물질들로 구성되어 있어 혐기성 소화시 가수분해반응이 율속단계로 인식되고 있으며, 이로 인한 유기물 부하율이 작고 반응조 용적이 커져 경제적이지 못한 것으로 알려져 있다. 따라서, 본 연구에서는 셀룰로즈 등의 고분자물질의 가수분해 반응에 활성이 뛰어난 rumen 미생물을 이용하여 주방폐기물의 혐기성 소화의 효율을 증진시키기 위한 연구가 600 mL의 회분식반응조에서 수행되었다. 주방폐기물의 가수분해 및 산생성 반응에 대한 중온산생성균과 rumen 미생물의 산생성반응 효율을 비교하였으며, rumen 미생물을 이용한 산형성 반응에서 pH, 온도, 고형물 농도등 환경인자의 영향을 평가하였다. Rumen 미생물을 이용한 주방폐기물의 산형성 반응에서 최종휘발산수율은 이론치의 약 95%에 해당하는 8.4meq/g VS를 보여 중온산형성균을 이용하였을 때와 비슷하였으나, 산생성반응의 속도는 중온산형성균을 이용했을 때 보다 약 2배 이상 빨랐다. Rumen 미생물을 이용한 주방폐기물의 산생성 반응에 대한 기질 농도의 영향에서는 TS 15%일 때 급격한 pH저하 및 비이온화된 VFA 등의 저해작용으로 휘발산수율은 TS 1%인 반응조에서의 절반이하의 값을 보여 유출수의 연속적인 희석이 중요한 인자임을 알 수 있었다. Rumen 미생물을 이용한 산생성 반응의 최적 pH 및 온도 범위는 각각 6.0~7.5, $35{\sim}45^{\circ}C$였다. 이상과 같은 결과로부터 rumen 미생물을 주방폐기물의 혐기성소화 공정에 이용할 경우 혐기성 반응의 율속단계로 고려되는 가수분해 및 산형성 반응의 속도를 증가 시킬 수 있어 반응조 용적 감소 및 유기물 부하 증가 등의 소화 효율향상이 가능함을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• 한국식품영양과학회지
• /
• 제25권6호
• /
• pp.899-906
• /
• 1996

본 연구에서는 솔잎즙을 김치에 첨가함으로써 솔잎이 김치의 발효 숙성에 미치는 영향을 조사하였다. 솔잎즙을 0, 0.5, 1.0 및 1.5% 첨가하여 제조한 김치를 실온에서 24시간 방치 후 $4^{\circ}C에서$ 15일 동안 숙성(A)또는 $15^{\circ}C에서$ 15일 동안 숙성(B)시키면서 숙성 0, 1, 2, 3, 4, 5, 7, 9, 11, 13 그리고 15일에 pH, 총 산, 환원당 및 총 비타민 C 함량 등 이화학적 특성 및 총 균수와 젖산균수 등 미생물학적 특성을 조사하였다. 솔잎즙 무첨가구의 pH는 숙성 3일에 적숙기의 pH와 유사한 pH 4.2에 도달한 반면, 솔잎즙 0.5, 1.0 및 1.5% 첨가구의 경우 각각 숙성 4, 5및 7일에 pH 4.2로 감소되어 솔잎즙을 첨가함에 따라 김치의 산패를 1~4일 정도 지연시켰다. 총 산 함량은 숙성이 진행됨에 따라 증가하였으며, 솔잎즙 무첨가구에 비해 솔잎즙 첨가구의 총 산 함량은 전반적으로 낮게 관찰되었다. 산도의 증가 및 pH의 감소는 A군에 비해 B군에서 보다 빨리 나타났다. 환원당 함량은 숙성 4~5일 동안 모든 처리구에서 약 80%정도 감소하였다. 총 비타민 C 함량은 모든 처리구에서 숙성 1일에 최고 수준에 도달한 뒤 감소하였다. 환원당 함량 및 총 비타민 C 함량은 솔잎즙 무처리구에서 보다 처리구에서 약간 높게 관찰되었으나, 이러한 결과는 솔잎 자체내에 함유된 환원당 및 비타민 C에 의한 것으로 생각된다. 총 균수는 숙성 초기에 급속히 증가하여 숙성 3일에 최고 수준에 도달한 후 서서히 감소했다. 숙성 온도에 따른 환원당 함량, 총 비타민 C 함량 및 총 균수의 차이는 발견되지 않았다. A군의 경우, 솔잎즙 무첨가구의 젖산균수는 숙성 9일에 최고 수준에 도달한 반면, 솔잎즙 첨가구에서는 숙성 5~9일에 최고 수준에 도달한 뒤 서서히 감소하거나 일정 수준을 유지 하였다. A군과는 달리 B군의 솔잎즙 첨가구의 젖산균수는 숙성 초기부터 증가하여 숙성 7일에 최고 수준에 도달한 후 서서히 감소하였다. 숙성 온도와 관계없이 솔잎즙 첨가 수준이 증가할수록 총 균수와 젖산균수는 감소하였다. 이상의 실험 결과들은 솔잎즙이 pH의 저하를 지연시키고 미생물의 생육을 억제함으로써 김치의 발효숙성을 지연시키는 효과를 나타내 보이고 있다.

• 한국방사선학회논문지
• /
• 제14권2호
• /
• pp.85-95
• /
• 2020

본 논문에서는 고에너지 엑스선(6MV X선)을 조사한 세뇨관의 세포막 모델에서 오줌의 원료구성성분인 포도당 수용액(H₂O-C₆H₁₂O₆)의 압력차에 따른 여과작용특성에 대하여 연구하였다. 이 실험에 사용한 세포막 모델은 polysulfone 지지막에다가 m-phenylene-diamine(MPD)과 trimesoyl chloride(TMC)- hexane을 계면중합으로 만들어진 여과성 고분자 복합막을 사용하였다. 0.5 wt% TMC- hexane 용액으로 만들어진 여과성막(CM-2)은 0.5 wt% TMC- hexane 용액으로 만들어진 여과성막(CM-1)보다도 총 부피투과플럭스(Jv)와 배제계수(R)가 매우 높다. 압력차(1.5~4MPa)와 36.5℃에서 방사선을 조사한 세뇨관의 고분자 막(세포막모델)은 포도당수용액(H₂O-C₆H₁₂O₆)에서 총 부피투과플럭스(Jv)와 배제계수(R)가 비 조사된 세포막모델보다 각각 약 2 ~ 13배, 4 ~ 6배 정도 감소되었다. 세포막모델에서 포도당수용액(H₂O-C₆H₁₂O₆)의 농도가 증가하면 배제계수(R)가 증가하고 총 부피투과플럭스(Jv)는 감소하였다. 결국 방사선조사로 인해서 세뇨관의 세포막에서 포도당수용액(H₂O-C₆H₁₂O₆)의 여과기능이 비정상적으로 되어 세포장해가 발생하게 되었다고 사료됐다.

• 한국측량학회지
• /
• 제33권4호
• /
• pp.317-324
• /
• 2015

GNSS 기상학은 1980년 중반 기상 분야에 활용 가능성이 제기된 후, 전 세계적으로 실용화 가능성이 입증되고 있으며, 현재 기상현업에 활용하기 위한 연구가 활발히 진행되고 있다. GNSS 신호의 대류권 지연오차에 기반하여 산출한 가강수량은 대기 중 수증기량을 나타낸 것으로, 기후 모니터링, 기후의 변화 탐지 등 다양한 기상현상 분석에 많이 사용되고 있다. 본 연구에서는 2014년 2월 울산에 내린 폭설현상 분석을 위해 GNSS 상시관측소와 자동기상관측장치에서 제공하는 기상관측 정보를 이용하여 가강수량을 산출하였다. 산출 과정 중 중요한 파라미터인 가중 평균 기온식은 송동섭의 모델을 적용하였다(Song, 2009a). 연구기간은 폭설이 발생한 2014년 2월과 폭설이 발생하지 않은 2013년 2월의 총 56일이다. 2014년 2월 가강수량의 평균은 11.29mm로 산출 되었으며, 폭설이 발생한 2월 9일부터 12일까지 평균 가강수량은 10.14mm로 전체 평균값보다 11.34% 낮은 값을 보였다. 폭설이 내리지 않은 2013년 2월 가강수량의 평균은 10.34mm로 2014년 평균보다 8.41% 낮은 값을 보였다. 또한 가강수량 외 AWS에서 제공하는 다른 기상인자들과 비교하여 폭설 현상에 대한 분석을 수행하였다. 그 결과 Magnus 경험식을 통해 산출한 포화수증기압 경우 GNSS 가강수량과 0.29의 낮은 상관성을 나타내었다. 또한 기상인자의 종류(강설, 강우)에 따라 가강수량의 증감패턴이 다르게 나타났으며, 강수량이 발생하기 평균 6.5시간 전에 가강수량 값이 급격히 증가한 후 감소하는 경향을 확인할 수 있었다. 이를 통해 GNSS 가강수량 패턴분석이 강수량 전조현상 분석에 유효할 것으로 판단된다.

• 자연과학논문집
• /
• 제1권
• /
• pp.115-198
• /
• 1987

The present studies were undertaken to elucidate the influence of auxins, auxin-like substance-ethychlozate ("Figaron"),and pH and sort of rooting media on rooted propagation of certainornamental woody plant cuttings, and to see possible changes in internal compositions characterizing after root-promoting treatment as the cutting stage proceeded. The experimental check-up srevealed and summarized as seen in the following;I. Effect of three different auxin treatments on rooting cuttings: 1) Promotive influence of auxin varied according to different concentration levels, hours of dipping treatment of the auxins, and kind of plants. The greatest effect was obtained for Forsythia ksreana with NAA and IBA, for Ligustrurn obtusifolium var. variegatum with NAA and ethychlozate, for Hydrangea macrophylla, Magnolia kobus, and Magnolia liliflora with NAA, lBA and ethychlozate also. The most effective level of the promotive agents was found 200mg/l for NAA, 1000mg/l for IBA, and 200mg/l for ethychlozate. For Weigela florida and Gardenia jasminoides, range of the most effective level was shown relatively wide spread. 2) NAA was more effective at its optimal level of the rooting agent than ethychiozate for Weigela florida, Viburnum awabuki, Forsythia koreana, Acer palmatum 'Nomura', Bouga invillea glabra, Elaeagnus umbellata, Prunus tomentosa, Ligustrum obtusifolium, Pyracantha coccinea, Cestrum noctu rnum, Hydrangea macrophylla, Codiaeum variegatum, Rhododen dron lateritium, and Ilex crenata var. macrophylla, and yet ethychlozate was found either as equally as effective or more so than NAA for Zebrina pendula, Hibiscus syriacus, Fatshedera lizei, Schefflera arboricola, Campsis grandiflo ra, Ixora chinensis, Euonymus japonica, and Magnolia liliflora. On the contrary, no the auxin effect was noted with Lagerstroemia indica, Trachelospermum asiaticum, and Syringa vulgaris. This probably indicates that these species are genetically different for the auxin response.II. Effect of different pH and sorts of cutting media on rooting cuttings: 1) Bougainvillea showed best in rooting for the number and dry weight at pH 6.5, more with ethychlozate than NAA, while Ligustrum did at pH 5.0 more with NAA than ethychlozate. pH 4.0 medium resulted in the best rooting for Rhododendron with NAA, more than ethychlozate. 2) Use of cutting medium with peat: perlite: vermiculite = 1:1:1 showed to give the greatest rooting percent and dry weight, apart from considering the number of roots. This apparently meant the fact that cutting medium has more to do with root growth than root differentiation. Rhododendron yet showed results with cutting media that use of peat: perlite = 2:1 mixed is more effective on rooting than using peat alone.III. Effect of auxinic treatments on rooting cuttings and change in some cutting compositions: 1) Under the climatic conditions of July having temperature $26.3\pm$$2.4^{\circ}C$for cutting bed, new roots of Magnolia started to show up generally 20 days after the cutting was made, whereas Cestrum did much earlier than that, namely 14 days after. 2) Although total carbohydrate content of Magnolia cuttings showed no marked change without auxin treatment, it did so with the treatment, especially 30 days after the start of cutting. Cestrum cuttings demonstrated a gradual in crease in total carbohydrate content as rooting took place, and the content became reduced more with auxin than with out, just about when rooting proceeded to 14 days after the start of cutting. 3) Magnolia generally showed an increase in total nitrogen content as rooting proceeded more, and Cestrum showed a decrease in total nitrogen of cuttings. The auxin treatment exhibited no pertinent relation with change in plant nitro gen when rooting is promoted with auxin treatment. 4) An abrupt drop of total sugar and reducing sugar was noticed as Magnolia rooting started, and this reduction was parti cularly outstanding with auxin treatment. Starch content also was decreased in the later stage of cutting with auxin treatment, and was rather increased without auxin. Although sugar content soon increased as cutting started with auxin treatment in the case of Cestrum, it became reduced after rooting took place. 5) Total phenol content increased with rooting, and this was especially true when rooting started. This increase was reversed somehow regardless of auxin treatment. A decrease in phenol of Magnolia was found more striking with auxin than without in the later stage of the cutting period. 6)Avena coleoptile test for auxin-like substances presented the physiologically active factor is more in easy-to-root Magnolia liliflora than hard-to-root Magnolia kobus, and the activity of auxin-like substances was much increased with auxin treatment. The increase in the growth promoting substances was markedly pronounced when rooting just started. The active growth substances decreased in the later stage of cutting, and certain inhibitory substances started appearing. Cestrum also showed physiologically similar growth promoting substances accompanying auxin-like active substances if auxin is treated, and some strong inhibitory substances seemed to appear in the later stage of cutting. 7) Mung-bean-rooting test indicated biologically that endogenous growth substances in Magnolia all promoted mung-bean rooting, and activity of the growth substances apparently stimulated mung-bean rooting with auxin more than without. Here auxin treatment seemed to give a rise to an increased activity of endogenous growth substances in cuttings. This activity was found much greater with either NAA or IBA than ethychlozate, and showed its peak of the activity when rooting first started taking place. Certain inhibitory substances for Avena coleoptile growth strongly promoted mung-bean rooting, and it was also much like in the case of Cestrum.