• 한국자기학회지
• /
• 제16권1호
• /
• pp.14-17
• /
• 2006

졸겔법을 이용하여 $AIFeO_3$ 단일상을 제조하였으며, 그 결정학적 및 자기적 특성을 X선 회절법(XRD), 진동 시료 자화율 측정법(VSM), 뫼스바우어 분광법으로 연구하였다. 결정구조는 공간군이 $Pna2_1$ orthorhombic 구조로 분석되었으며, 격자 상수는 각각 $a_0=4.983\;{\AA},\;b_0=8.554\;{\AA},\;c_0=9.239\;{\AA}$임을 알 수 있었다. VSM을 이용하여 65K에서부터 상온까지 여러 온도 구간에서 자기이력곡선을 측정하였으며, 강자성 특성과 함께 저온영역에서 자기 이력 곡선의 비대칭성이 관측되었다. 온도에 따른 자기모멘트 측정 결과로부터 자기전이온도는 250k로 결정하였다. 뫼스바우어 스펙트럼은 4.2K에서부터 상온까지의 온도 영역에서 측정하였으며, 분석 결과 상온에서 이성질체 이동치는 0.32mm/s로 철의 이온상태가 ferric임을 확인할 수 있었다. 온도변화에 따라 측정된 뫼스바우어 스펙트럼 분석은 온도에 따라 선폭이 증가함이 관측되었는데, 이러한 흡수선의 비대칭적 선폭 증가는 1개의 사면체자리와 3개의 팔면체 자리의 Fe이온 분포와 각 부격자간 자기이방성 에너지 차이에 따른 결과로 해석된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제29권2호
• /
• pp.153-161
• /
• 2014

The aim of this study is to investigate the effects of ambient thermal environments on the development of swallowtail butterflies (Sericinus montela Gray). Developmental durations and survival rates of S. montela were examined at two crucial developmental stages, embryonic and larval development, at varying temperatures ranging from $15^{\circ}C$ to $35^{\circ}C$. As expected, our results indicated that increasing temperatures decreased the developmental duration and survival rate of the eggs. However, the larvae and pupae showed maximum survival rates at $20.0^{\circ}C$ and $25.0^{\circ}C$, and the represented durations were similar to those of the eggs. Larval development was stage-specific, revealing that the fourth and fifth instars at the later stages were more susceptible to temperature variation. When considering both parameters, the optimal development of S. montela occurred within the temperature range of $20.0-25.0^{\circ}C$. The lower threshold for the complete development of S. montela from eggs to eclosion of adults was calculated at $10.6^{\circ}C$ by linear regression analysis. The estimated value is similar to that of other endemic insects distributed in temperate climate zones, which indicates that S. montela belongs to a small group of swallowtails adjusted to low ambient temperatures. From the results, we predict that the full development of S. montela could be achieved within the temperature range of $17.5-30.0^{\circ}C$. Embryonic development ceased at both test temperature extremes, and no further larval development proceeded after the third instar at $35.0^{\circ}C$. These results suggest that embryogenesis can be significantly influenced by slight variations in the ambient thermal environment that fall below the optimal range.

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.818-822
• /
• 2011

ZnO nanorods were grown on Au-coated Si substrates by vapor phase transport (VPT) at the growth temperature of $600^{\circ}C$ using a mixture of zinc oxide and graphite powders as source material. Au thin films with the thickness of 5 nm were deposited by ion sputtering. Temperature-dependent photoluminescence (PL) was carried out to investigate the optical properties of the ZnO nanorods. Five peaks at 3.363, 3.327, 3.296, 3.228, and 3.143 eV, corresponding to the free exciton (FX), neutral donor bound exciton ($D^{\circ}X$), first order longitudinal optical phonon replica of free exciton (FX-1LO), FX-2LO, and FX-3LO emissions, were obtained at low-temperature (10 K). The intensity of these peaks decreased and their position was red shifted with the increase in the temperature. The FX emission peak energy of the ZnO nanorods exhibited an anomalous behavior (red-blue-red shift) with the increase in temperature. This is also known as an "S-shaped" emission shift. The thermal activation energy for the exciton with increasing temperature in the ZnO nanorods is found to be about 26.6 meV; the values of Varshni's empirical equation fitting parameters are = $5{\times}10^{-4}eV/K$, ${\beta}=350K$, and $E_g(0)=3.364eV$.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.698-705
• /
• 2008

전자파가 대기를 통과할 때 대기를 형성하고 있는 다양한 요인들에 의해 그 특성이 변동하게 된다. 전파 특성에 영향을 미치는 대기의 주요 요인으로는 수증기, 안개, 산소와 같은 대기 입자, 강우, 강설 및 그 외 여러 종류의 에어로졸을 들 수 있으며, 이러한 것들은 지형 및 지역적 특성에 따라 다르게 분포한다. 따라서 대기 환경에서의 전파 특성을 예측하기 위해서는 주어진 환경에 대한 기온, 습도, 기압, 풍속, 에어로졸 및 강우율 등의 통계적 분석이 중요하다. 본 논문에서는 국내 대기 환경에 대한 통계적 분석을 수행하였으며, 이를 바탕으로 국내 대기 환경에서의 전파 특성을 분석하였다.

• 한국해양학회지
• /
• 제12권1호
• /
• pp.13-32
• /
• 1977

In order to determine the distributional ecology, and to investigate factors influencing these features, the diatom communities in plankton at depths of one, twenty-five, fifty, and seventy five meters in the area were studied and measured over a fifteen month of period. Measurements of environmental factors including temperature and salinity and algal nutrients such as phosphate, silicate, nitrate, and ammonia were also made at the same depths and locations. The results indicate that the size of diatom communities and the species population changes were heavily dependent upon to season and location parameters as well as nutrient concentrations and hydrographic factors. Major factors influencing population distributions varied with principal species responsible for dominant species and species sucession. Two distinct distributional patterns in total diatom crop were observed in the study area. Maximum standing crop observed during spring and/or summer were related to the concentration of nutrients available at the onset of the spring bloom on a large scale. On a small scale, however, the distributions of total diatom standing crops were significantly correlated with both season/location factors and with hydrographic parameters as well. Vertical stratification of diatoms was observed only in the presence of the thermocline in the water column. Within the study area there was some seasonal consistancy in the composition of the species groups. However, some species association in these environments may vary with the change of season.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.45-51
• /
• 2009

A ground-loop heat exchanger in a ground source heat pump system is an important unit that determines the thermal performance of a system and its initial cost. The size and performance of this heat exchanger is highly dependent on ground thermal properties. A proper design requires certain site-specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This study was performed to investigate the effect of some parameters such as borehole lengths, various grouting materials and U-tube configurations on ground effective thermal conductivity. In this study, thermal response tests were conducted using a testing device with 9-different ground-loop heat exchangers. From the experimental results, the length of ground-loop heat exchanger affects to the effective thermal conductivity. Among the various grouting materials, the bentonite-based grout with silica sand shows the largest thermal conductivity value.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.37-38
• /
• 2009

SiC power device possesses attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation. In general, device design has a significant effect on the switching characteristics. It is known that in SiC power MOSFET, the JFET region width is one of the most important parameters. In this paper, we demonstrated that the switching performance of DMOSFET is dependent on the with width of the JFET region by using 2-D Mixed-mode simulations. The 4H-SiC DMOSFETs with a JFET region designed to block 800 V were optimized for minimum loss by adjusting the parameters of the n JFET region, CSL, and n-drift layer. It has been found that the JFET region reduces specific on-resistance and therefore the switching characteristics depend on the JFET region.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.431-440
• /
• 2018

Fluid velocity analysis on the instability of pipes reinforced by silica nanoparticles ($SiO_2$) is presented in this paper. Mori-Tanaka model is used for obtaining the effective materials properties of the nanocomposite structure considering agglomeration effects. The well known Navier-Stokes equation is used for obtaining the applied force of fluid to pipe. Based on the Reddy higher-order shear deformation theory, the motion equations are derived based on energy method and Hamilton's principal. The frequency and critical fluid velocity of structure are calculated using differential quadrature method (DQM) so that the effects of different parameters such as volume fractions of SiO2 nanoparticles, SiO2 nanoparticles agglomeration, boundary conditions and geometrical parameters of pipes are considered on the nonlinear vibration and instability of the pipe. Results indicate that increasing the volume fractions of SiO2 nanoparticles, the frequency and critical fluid velocity of the structure are increased. Furthermore, considering SiO2 nanoparticles agglomeration, decreases the frequency and critical fluid velocity of the pipe.

• Structural Engineering and Mechanics
• /
• 제64권4호
• /
• pp.515-526
• /
• 2017

Dynamic response of functionally graded Carbon nanotubes (FG-CNT) reinforced pipes conveying viscous fluid under accelerated moving load is presented. The mixture rule is used for obtaining the material properties of nano-composite pipe. The radial force induced by viscous fluid is calculated by Navier-Stokes equation. The material properties of pipe are considered temperature-dependent. The structure is simulated by Reddy higher-order shear deformation shell theory and the corresponding motion equations are derived by Hamilton's principal. Differential quadrature (DQ) method and the Integral Quadrature (IQ) are applied for analogizing the motion equations and then the Newmark time integration scheme is used for obtaining the dynamic response of structure. The effects of different parameters such as boundary conditions, geometrical parameters, velocity and acceleration of moving load, CNT volume percent and distribution type are shown on the dynamic response of pipe. Results indicate that increasing CNTs leads to decrease in transient deflection of structure. In accelerated motion of the moving load, the maximum displacement is occurred later with respect to decelerated motion of moving load.

• The Korean Journal of Ecology
• /
• 제8권4호
• /
• pp.179-196
• /
• 1985

By using temperatures as a key variable, a simulation model was constructed to predict the size and developmental speed for the German cockroach population. The following three research steps were conducted to implement the individual simulation technique to represent the basic life system of the cockroach. First, informations on developmental periods and survival rates in each life stage were obtained through rearing experiments at five different temperatures. Secondly, biological parameters needed for modeling were obtained based on these rearing results. The logistic equation was applied to calculating the developmental speed, while the averages of survival rates were utilized as parameters determining population size. And thirdly, a basic life model was constratued in a stimulative framework in FORTRAN for predicting the populating development on the individual basis. For this purpose the biological characteristics, such as life stage, age in days, developmental speed, fecundity, etc., were assigned as an inherent attribute of the transactiion so that they could accompany each individual automatically all through the simulation. This gave the model flexibility and applicability in representing the isnect life system. The save memory space in computer programing, two files were utilized in translocating the individual informations each other as time proceeded. The developed model could be effectively used as a strategic tool in interpreting and managing the cockroach population. It was also suggested in this study that the individual simulation could efficiently serve as a basis to formulate a fundamental framework on which the advanced and complex life process could be built.