• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2741-2746
• /
• 2013

The immobilization of enzyme is one of the key issues both in the field of enzymatic research and industrialization. In this work, we reported a facile method to immobilize Candida Antarctica lipase B (CALB) in alginate carrier. In the presence of calcium cation, the enzyme-alginate suspension could be cross-linked to form beads with porous structure at room temperature, and the enzyme CALB was dispersed in the beads. Activity of the enzyme-alginate composite was verified by enzymatic hydrolysis reaction of p-nitrophenol butyrate in aqueous phase. The effects of reaction parameters such as temperature, pH, embedding and lyophilized time on the reactive behavior were discussed. Reuse cycle experiments for the hydrolysis of p-nitrophenol butyrate demonstrated that activity of the enzyme-alginate composite was maintained without marked deactivation up to 6 repeated cycles.

• 한국태양에너지학회 논문집
• /
• 제37권1호
• /
• pp.71-80
• /
• 2017

A Data center houses a large number of server computers, storage and etc in racks. With the rapid increase of heat generation rates per rack in a data center, energy consumption rates for cooling have been increased year by year. In this study, energy conservation effects of a MOA (multi-stage outdoor air enabled) cooling system in a data center has been investigated when it is applied to 5 different locations, Korea. As results, Energy conservation effects of the MOA cooling system was achieved at about 20% to 30%. Humidifier operation time was 40 to 55 days when supply air temperature was maintained at 13, and humidity condition was kept within the allowed range even though humidifier was off. Furthermore, humidification was not needed when supply air temperature was maintained at $25^{\circ}C$. In selected 5 locations in Korea, the difference of regional climatic conditions affected no more than 5% in cooling energy consumption rates.

• 소성∙가공
• /
• 제11권1호
• /
• pp.61-68
• /
• 2002

The thermal shock and thermal fatigue test has been carried out to analyze the thermal characteristics of tool steels for hot forging and the effects of mechanical properties on this study have been investigated. The resistance to thermal shock is first of all a matter of good toughness and ductility. Therefore, a proper hot-work tool steel should be characterized by high fracture strength and high temperature toughness. Based on these results, some critical temperature($T_{fracture}$) at which fracture occur can be measured to characterize the thermal resistance of the materials. During thermal fatigue tests, the thermal fatigue cracks occur because of the repetitive heating and cooling of the die surface and the thermal fatigue damage was evaluated by analyzing different number of cycles to failure. The results showed that the resistance to thermal shock and thermal fatigue were found to be favoured by high hot tensile strength and high hot hardness, and thermal resistance of SKD61 was superior to that of ESC, SKT4 and this was caused by higher mechanical properties of SKD61.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.899-903
• /
• 2008

This study was conducted in order to elucidate the optimum conditions for the extraction of clove that can be used to elicit antibacterial activity against Streptococcus mutans using the evolutionary operation (EVOP)-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature of $80^{\circ}C$ ($r=0.7983^{**}$) and in a longer extraction time of 26 hr ($r=0.6867^*$). Antibacterial activity was not effected by differentiation of ethanol concentration in the extraction solvent (r=-0.0683). The maximum antibacterial activity of clove against S. mutans as determined by the EVOP-factorial design technique was obtained at an extraction temperature of $80^{\circ}C$, an extraction time of 26 hr and a 50% ethanol concentration. Furthermore, the population of S. mutans decreased from an initial concentration of 6.850 to 4.195 log CFU/mL in the third set that is more than 2.6 log cycles by EVOP-factorial design technique.

• Ocean Science Journal
• /
• 제43권2호
• /
• pp.115-126
• /
• 2008

Direct measurements of four radiative components at air-sea boundary layer were conducted in the southern Yellow Sea during three cruises (seasons) in 2007. Simultaneous observations of meteorological (cloud cover, air temperature and humidity) and oceanographic (sea surface temperature) parameters were carried out. Observational results of radiative fluxes and meteorological and oceanographic parameters are presented. Mean diurnal cycles of four radiative components, net radiation, and sea surface albedo are calculated to achieve averages in different seasons. Net radiative fluxes in three seasons (winter, spring, autumn) are 8, 146, $60\;W/m^2$, respectively. Comparisons between the observed radiative fluxes and those estimated with formulas are taken.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.166-175
• /
• 2002

Low cycle fatigue tests are performed on the HSLA steel that be developed for a submarine material. The relation between strain energy density and numbers of cycles to failure is examined in order to predict the low cycle fatigue life of HSLA steel. The cyclic properties are determined by a least square fit techniques. The life predicted by the strain energy method is found to coincide with experimental data and results obtained from the Coffin-Manson method. Also the cyclic behavior of HSLA steel is characterized by cyclic softening with increasing number of cycle at room temperature. Especially, low cycle fatigue characteristics and microstructural changes of HSLA steel are investigated according to changing tempering temperatures. In the case of HSLA steel, the $\varepsilon$-Cu is farmed in $550^{\circ}C$ of tempering temperature and enhances the low cycle fatigue properties.

• 한국농공학회지
• /
• 제31권2호
• /
• pp.43-53
• /
• 1989

In this research programs, a series test was conducted to show the effects of freeze/thaw process on the various soil properties. The tests were carried out taken from the west sea shore of Korean peninsular and the west sea shore of Scotland, and their results are as follows; 1. There was a positive total heave in a freezing run, although water may he expelled for the sample initially. The water flow must he reverse' from expulsion to intake. 2. The confining pressure had an overriding influence on the heave and frost penetration, a sudden change of the axial strain at failure with strain rate was observed occuring at a strain rate between 10-5 and 10-6, and the initial friction angle of frozen clay was appeared zero. 3. There was shown a significant decrease in liquid limit of soil which was subjected to freeze/thaw process for the initial value of about 20% because of soil particles aggregation. 4. The cyclic freeze/thaw caused a sinificant reduction in shear strength and its thixotropic regain. The frozen/thawed soil exibited negative strength regain, particularly at high freeze/thaw cycles. 5. The freezing temperature greatly influenced on the failure strength of soils and this. Trend was more pronounced the lower the freezing temperature and shown the ductile failure with indistinct peaks.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.325-329
• /
• 1999

The characteristic of East Asian summer monsoon is investigated using 8-year (March 1987-February 1995) - averaged monthly and 5-day mean 1 degree latitude-longitude gridded GMS high-cloud-amount data (HCA). An analysis of these data shows the convective zone (ITCZ) clouds which defined as the percentage of the total grid area covered by clouds with a cloud-top temperature below the 400 hPa-level climatological temperature. The HCA increased clearly over equatorial zone during December and January and 30-40 $^{\circ}$N during May and June. These HCA patterns are coincided with seasonal cycles of summer monsoon which is introduced in historical references. The relationship with the summer monsoon winds as climatological changing of wind direction is analyzed by ECMWF re-analysis 2.5-degree latitude-longitude grid surface data which is calculated with 8-year averaged from January 1987 to January 1995. In addition, the monsoon winds are showed by separated U, V-wind components far manifestation a tendency of onset and retreat data of seasonal monsoon.

• 대기
• /
• 제17권4호
• /
• pp.463-470
• /
• 2007

This study aims to assess the impact of the hot summer weather on daily mortality in Busan. Daily total all-caused mortality in the entire population in Busan has been examined during 1991-2005. The daily deaths were standardized to account for the long-term trend in mortality and their seasonal and weekly cycles. We found the net increase (about 8.2%) of excess deaths during the extraordinary heat wave period in July of 1994. It corresponds to the excess deaths of 109.5 during the month. The abnormality of temperature extremes in July of 1994 and their impacts on human health were also investigated. Unusual heat wave appeared in the first ten days in July of 1994. The excess deaths are likely to be attributable to the record-breaking heat waves. The result suggests that unusual early heat waves would be dangerous, even for inhabitants who live in an acclimated region to the heat waves such as Busan.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.130-132
• /
• 2013

$Bi_{3.25}La_{0.75}Ti_3O_{12}$(BLT) thin films were prepared on the Pt(150 nm)/Ti(50 nm)/$SiO_2$/Si substrate using the rf magnetron sputtering method. The BLT thin films were annealed at temperatures ranging from $600^{\circ}C$ to $750^{\circ}C$ using the rapid thermal annealing. The structure and surface morphology of the thin films were characterized by x-ray diffraction and field emission scanning electron microscopy. The hysteresis loop of the BLT thin films showed that the remanent polarization (2Pr) of the film annealed at $700^{\circ}C$ was 10.92 ${\mu}C/cm^2$. The fatigue characteristic of the BLT thin film annealed at $700^{\circ}C$ was shown change polarization up to $1.2{\times}10^9$ switching cycles. We confirmed the excellent remnant polarization (Pr) and fatigue properties compared with other fabrication methods and suggested a good method for BLT thin films fabrications.