• 한국화재소방학회논문지
• /
• 제13권1호
• /
• pp.3-10
• /
• 1999

천연섬유분진의 연소특성을 조사하고자 국내 방적공장의 집진기에서 직접 포집된 천연섬유분진을 열시차 및 열중량 분석기를 이용하여 온도에 따른 분해 특성을 조사하였고, 자연발화 시험기를 이용하여 시료의 입도분포 및 시료량에 따른 천연섬유의 연소특성을 시간에 따른 온도의 변화로 측정하였다. 또한 자연발화 시험기 내부의 공기흐름에 따른 연소특성을 조사하고자 송풍과 무풍 상태에서의 자연발화 또는 훈소특성을 조사하였다. 열분석 결과 승온속도가 증가할수록 발열개시온도가 현저히 낮았고 발열량도 크게 증가하였다. 또한, 천연섬유 분진은 시료량과 입도가 증가할수록 발열개시온도가 낮아지고 있으며, 연소형태는 모두 훈소 상태를 보였다. 시험기 내부가 송풍상태일 때 보다 무풍상태로 실험하였을 때 발열개시온도가 약간 낮으며, 발열량도 크게 나타났다.

• 한국초지조사료학회지
• /
• 제15권3호
• /
• pp.157-163
• /
• 1995

The objective of this study is to obtain the basic data for investigating the effects of organic reserves on winter survial or regrowth yield. Dry matter, nitrogen and non-structural carbohydrate content of plants grown under $5^{\circ}C$ or $20^{\circ}C$ of culture temperature during 25 days were investigated. The dry matter content of leaves and roots were significantly reduced under $5^{\circ}C$ compared with $20^{\circ}C$culture condition. Comparing with the dry matter per plant under $20^{\circ}C$, those in leaves and roots under $5^{\circ}C$ decreased to 25% and 10%, respectively, after 25 days of temperature treatment. Total nitrogen content in leaves under $20^{\circ}C$ and $5^{\circ}C$ increased to 68% and 39% compared to the initial lenel(day O), respectively, during 25 days after temperature treatment, Nitrogen content in roots highly increased under 5 C while there was a little change under $20^{\circ}C$ condition. The nitrogen contents in roots under $5^{\circ}C$ and $20^{\circ}C$ were 39.0 and 30.8mgJg DM, respectively, after 25 days of temperature treatment. Total contents of soluble carbohydrate in both leaves and roots under $5^{\circ}C$ were higher than those under $20^{\circ}C$ condition. After 25 days of temperature treatment under$5^{\circ}C$ , their contents in leaves and roots were 1.4 and 2.0 times higher than those of under $20^{\circ}C$ condition. Stach atent in roots under $20^{\circ}C$ was less changed, while thatof under $5^{\circ}C$ greatly increased from 64.8 to 178.7mglg DM duling 25 days. 'Ihese results clearly showed that an accumulation of both nitrogen and non-structural carbohydrate in the plants occured under low temperature condition.e condition.

• 한국작물학회지
• /
• 제61권3호
• /
• pp.163-170
• /
• 2016

Heading time is important element for yield and quality in crops. Among day length and temperature which influence on heading, temperature effect has not been investigated well. To investigate temperature effect on heading, heading date and plant growth characters were checked under the low and high temperature conditions in short day length. Analyzing heading date of six Korean varieties under the high and low temperature condition, heading date of varieties were delayed under low temperature. In the low temperature condition, dry weight and area of leaf were reduced. Varieties showing more delay of heading under low temperature also showed more reduction in leaf area. After selecting three varieties showing significant difference in leaf growth and heading date under different temperature conditions, nutrient contents of plant were analyzed. Nitrogen content was reduced in leaf and shoot under the low temperature condition. OsNRT2.3, nitrate transporter, was significantly down regulated in varieties showing more heading delay. Available phosphate content was decreased in leaf, but increased in shoot due to reduction of phosphate mobility. OsPT1, phosphate transporter regulating phosphate uptake, was more down regulated in varieties showing more heading delay. OsPT6, phosphate transporter regulating phosphate transport in plant, was also significantly down regulated in those varieties. With these data, we expected that active nitrogen and available phosphate uptake and transport in plant would increase leaf growth then might reduce heading delay under the low temperature condition.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.59-65
• /
• 2002

Grinding temperature between a grinding wheel and a workpiece surface, rising rapidly during a machining operation, has bad effects on a surface integrity such as the burning, the residual stress and the crack. In this study, the temperature distribution was obtained briefly by the finite element method and the grinding temperature of a workpiece varying with the grinding condition was measured experimentally. For obtaining the grinding temperature, a thermocouple method was applied. Three thermocouples were inserted in a surface of each workpiece. Changed grinding conditions were the depth of cuts, the feedrate, the dry and wet grinding, the up and down grinding and the number of pieces.

• 한국약용작물학회지
• /
• 제27권6호
• /
• pp.390-396
• /
• 2019

Background: Usually ginseng seeds are sown during autumn and spring. Sowing in spring often results in poorer seedling establishment than in autumn. One of the reasons for poor germination could be cold-treatment condition for breakage of physiological dormancy during winter. Here we tested the effects of storage temperature used during cold treatment on germination. Methods and Results: Germination properties were observed after dehiscent seeds were stored as wet and dry at 2℃, -2℃, -3.5℃ and alternating temperature (AT). Seed dryness and storage temperature affected germination properties (p < 0.01). Wet and AT condition germinated highest, and wet and -3.5℃ condition germinated lowest, which was 91.2% and 1.4% respectively. Mean germination time (MGT) of the wet and AT condition was faster than other treatments at 2.4 days, and the dry and -2℃ condition was the longest. Germination performance index (GPI) was highest for wet and AT condition (37.7%) and the lowest for wet and -3.5℃ condition (0.5%). The growth of above-ground and below-ground were the best for wet and 2℃ condition, and wet seeds showed better growth than dry seeds (p < 0.01). Conclusions: For cold treatment, ginseng seeds may not be stored below -2℃ for successful germination during spring sowing.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1145-1151
• /
• 2004

The experiment of thermal performance about cross flow type cooling tower was conducted in this study. Generally the ambient air condition can affect the thermal performance of cooling tower to improve or not. However it is hard to control the cooling water temperature that we want under bad air condition or during rainy season. In this paper, the effect of variables, which the ambient air have. especially wet-bulb temperature, are experimentally investigated for controlling the cooling water temperature more successfully. The result is that there is appropriate air flow rate in respective air condition to preserve the cooling performance in the cooling tower and the maximum air flow rate can't overcome the approach under bad air condition.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.43-43
• /
• 2017

During grain filling period, rice is affected by many environmental factors; including temperature, water, radiation and soil nutrition condition. In future climate, greater shading and heat tolerance will be required in rice. In this study, the effect of shading and high temperature on spikelet sterility was conducted on fourteen Vietnamese cultivars. Field experiments were studied in 2015 and 2016 to evaluate the response of Vietnamese cultivars under high temperature during grain filling stage. The high temperature and shading were applied by closing two sides of growth chamber and covered by a black cloth (50% reduced solar radiation) under the field condition after the first cultivar heading. The sterility increased significantly under high temperature and shading. The highest percentage sterile spiketlets was observed in 'Jasmine 85' (71.7%) under shading and in 'OM4900' (53.4%) under high temperature in 2015 and 2016, respectively. Among the treatments, the percentage of sterile spekelets in Vietnamese cultivars under shading was highest which was 54.9% and 41.8% in 2015 and 2016, respectively. Yield components reduced significantly in both of shading and high temperature. Corresponding with significantly decrease in yield components, the yield in high temperature and shading decreased strongly in both 2015 and 2016.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.681-687
• /
• 2013

본 연구는 학습 환경의 실내 온도와 학습재료 색채와의 조합이 학습수행에 어떠한 영향을 미치는 지를 살펴보고자 하였다. 이를 위해 학습활동 적정온도($22.5{\sim}24^{\circ}C$)를 중심으로(중립 실내 온도 조건), 그 이상인 조건(고온 실내온도 조건), 그리고 그 이하인 조건(저온 실내 온도 조건)으로 각각 실내 온도 조건을 구분하였으며, 난색계열인 빨간색과 한색계열인 파란색, 그리고 중성인 검은색과 연두색으로 각각 색채 조건을 구분하였다. 학습과 관련된 과제로는 음운 작업기억 과제를 사용하여 집단 간 실내 온도 조건에 따른 색채 조건에서의 과제 수행을 살펴보았다. 그 결과, 학습과제의 반응시간에서는 각 독립변수들에 의한 차이가 유의하지 않은 반면, 정확률에서는 색채 조건 중 빨간색과 검은색 조건에서 보다 정확한 수행이 나타났다. 이는 빨간색이 가진 현저성과 색채 온도감 및 검정색이 가진 친숙성과 다른 색에 비해 유일하게 현저성을 가지지 않는 특이성이 존재하기 때문에 나타난 결과로 해석할 수 있다.

• 한국화재소방학회논문지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2001

전분 분말의 온도에 따른 열적 안정성을 조사하기 위하여 시차주사열량계(DSC, Differential Scanning Calorimeter) 빛 열중량 분석기(TGA, Thermogravimetric Analysis)를 이용하여 온도에 따른 발열개시 온도, 발열량 등을 조사하였으며, 자연발화 시험기를 이용하여 시료량에 따른 전분 분말의 연소특성을 시간에 따른 온도의 변화를 측정하여 연소개시시간 및 연소시 상승하는 온도를 측정함과 동시에 육안으로 연소특성을 조사하고자 하였다. 한편 자연발화 시험기 내부의 공기흐름에 따른 연소특성을 조사하기 위하여 송풍과 무풍 상태에서의 연소특성을 조사하고자 하였다. 선분 분말의 열분석 결과 승온속도가 증가할 수록 발열개시온도가 저온부로 이동하고 있으며, 발열량도 크게 증가하였다. 또한, 자연발화 실험결과 전분의 양이 증가할수록 훈소 개시온도가 낮아지고, 연소형태는 모두 훈소였다. 자연발화 시험기 내부가 송풍상태일 때 보다 무풍상태로 실험하였을 경우 훈소 개시시간이 다소 빨라지고 있으며, 발열최고온도도 크게 나타났다.

• Composites Research
• /
• 제30권1호
• /
• pp.7-14
• /
• 2017

In this paper, the inter-lamina shear strength (ILSS) of multi-wall carbon nanotube (MWNT) reinforced carbon fiber reinforced plastics (CFRP) and thin-ply composites were verified under low earth orbit (LEO) space environment. CFRP, MWNT reinforced CFRP, thin-ply CFRP and MWNT reinforced thin-ply CFRP were tested after aging by using accelerated ground simulation equipment. The used ground simulation equipment can simulate high vacuum ($2.5{\times}10^{-6}torr$), atomic oxygen (AO, $9.15{\times}10^{14}atoms/cm^2{\cdot}s$), ultraviolet light (UV, 200 nm wave length) and thermal cycling ($-70{\sim}100^{\circ}C$) simultaneously. The duration of aging experiment was twenty hours, which is an equivalent duration to that of STS-4 space shuttle condition. After the aging experiment, ILSS were measured at room temperature ($27^{\circ}C$), high temperature ($100^{\circ}C$) and low temperature ($-100^{\circ}C$) to verify the effect of operation temperature. The MWNT and thin-ply shows good improvement of ILSS at ground condition especially with the thin-ply. And after LEO exposure large degradation of ILSS was observed at MWNT added composite due to the thermal cycle. And the degradation rate was much higher under the high temperature condition. But, at the low temperature condition, the ILSS was largely recovered due to the matrix toughening effect.