• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.37-42
• /
• 2007

We are developing a 22.9 kV/25 MVA superconducting fault current limiting(SFCL) system for a power distribution network. A Bi-2212 bulk SFCL element, which has the merits of large current capacity and high allowable electric field during fault of the power network, was selected as a candidate for our SFCL system. In this work, we experimentally investigated important characteristics of the 190 kVA Bi-2212 SFCL element in its application to the power grid e.g. DC voltage-current characteristic, AC loss, current limiting characteristic during fault, and so on. Some experimental data related to thermal and electromagnetic behaviors were also compared with the calculated ones based on numerical method. The results show that the total AC loss at rated current of the 22.9 kV/25 MVA SFCL system, consisting of one hundred thirty five 190 kVA SFCL elements, becomes likely 763 W, which is excessively large for commercialization. Numerically calculated temperature of the SFCL element in some sections is in good agreement with the measured one during fault. Local temperature distribution in the190 kVA SFCL element is greatly influenced by non-uniform critical current along the Bi-2212 bulk SFCL element, even if its non-uniformity becomes a few percentages.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.431-436
• /
• 2014

In this paper, temperature change properties on the 210kW-class Interior Permanent Magnet Synchronous Motor (IPMSM) are performed with the cooling performance of a water cooling device through the thermal characteristic analysis of the IPMSM considering a real driving pattern of urban railway vehicles. First, the thermal analysis modeling of 210kW-class IPMSM, which is an alternative to the conventional induction motor, and its water cooling device is conducted. Next, the thermal characteristic analysis of the IPMSM considering a real driving pattern of urban railway vehicles is performed using 2-Dimensional FEM tool. Finally, the calculated characteristic results are analyzed. Consequently, it is confirmed that the internal temperature of the 210kW-class IPMSM may be lowered to about 42~52% by maintaining the coolant flow rate of the water cooling device (Cross sectional shape of the pipe has 220mm width and 10mm height) for 0.2kg/s level.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.927-929
• /
• 2003

Using received northeast region in China of Terra/MODIS data at Tokyo University of information Sciences. Make monthly division Land Surface Temperature maximum composite image. Using monthly division Land Surface Temperature maximum composite image, considered characteristic of monthly variation of Land surface temperature and relation with land covering and NDVI at the northeast region in China.

• 대한본초학회지
• /
• 제22권4호
• /
• pp.29-34
• /
• 2007

Objective : Kyenegum(Galli Stomachichum Corium) has been popularly used long as the digestive. The purpose of this study was to investigate the enzymatic characteristic of Kyenegum crude enzyme. Methods : To evaluate of the enzymatic characteristic of Kyenegum, we examined the activity of Kyenegum crude enzyme from optimum solvent, optimum temperature and pH of crude Kyenegum extract. Futhermore, we examined the effects of NaCI and acidity of crude Kyenegum extract. Results : The Kyenegum was composed with crude protein about 20%, crude lipid 2%. The optimum Kyenegum dry condition, optimum extract solvent, optimum temperature and optimum pH were $4{\sim}6$ hours at $60^{\circ}C$, commercial apple vinegar, $50^{\circ}C$ and 2.0. Conclusion : The result suggests that the Kyenegum crude enzyme extract very strong enzyme in temperature, NaCl and acidity, respectively.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.193-200
• /
• 2006

To perform the finish grinding process of ferrules which are widely used as fiber optic connectors, a high-precision centerless grinding machine is necessary. The high-precision centerless grinding machine is consisted of the hydrostatic GW and RW spindle systems, hydrostatic RW feeding mechanism, RW swivel mechanism, on-machine GW and RW dressers, and concrete-filled steel bed. In this study, the thermal characteristics of the high-precision centerless grinding machine such as the temperature distribution, temperature rise and thermal deformation, are estimated based on the virtual prototype of the grinding machine and the heat generation rates of heat sources related to the machine operation conditions. The reliability of the predicted results is demonstrated by the temperature characteristics measured from the physical prototype. Especially, the predicted and measured results show the fact that the high-precision centerless grinding machine has very stable thermal characteristics.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.32-37
• /
• 2007

The outer diameter finishing grinding process required for ferrules, which are widely used as fiber optic connectors, is carried out by high-precision centerless grinding machines. In this study, the thermal characteristics of such a machine, for example, the temperature distribution, temperature rise, and thermal deformation, were estimated based on a virtual prototype and the heat generation rates of heat sources related to normal operating conditions. The prototype consisted of a concrete-filled bed. hydrostatic grinding wheel (GW) and regulating wheel (RW) spindle systems, a hydrostatic RW feed mechanism, a RW swivel mechanism, and on-machine GW and RW dressers. The reliability of the predicted results was demonstrated using temperature characteristics measured from a physical prototype. The predicted and measured results indicated that this particular high-precision centerless grinding machine had very stable thermal characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.198-202
• /
• 2001

In this study, contour vibration mode piezoelectric transformer with size of 27.5${\times}$27.5${\times}$2.6mm$^3$ using PNW-PMN-PZT ceramic was fabricated. And the piezoelectric transformer was adopted to fluorescent lamp ballast circuit. Electrical characteristics of the piezoelectric transformer were investigated for fluorescent lamp ballast application. The electrical properties and characteristic temperature rise were measured using oscilloscope and infrared temperature sensor. A 28W fluorescent lamp was successfully driven by the fabricated ballast circuit. After driving the lamp using ballast circuit for 24 min, the output power, efficiency and characteristic temperature rise of piezoelectric transformer showed the appropriate values of 28.85[W], 86.3[%] and 15[$^{\circ}C$], respectively.

• 대한전기학회논문지
• /
• 제44권7호
• /
• pp.901-907
• /
• 1995

The switching characteristics of As$_{10}$ Ge$_{15}$ Te$_{75}$ thin film were investigated under d.c. bias. And the frequency dependence of the conductivity was analysed with regard to the temperature dependence, in order to find the physical properties of the As$_{10}$ Ge$_{15}$ Te$_{75}$ thin film ; a characteristic relaxation time (.tau.$_{0}$ ), the spatial density of defect states (N), and the localized wavefunction (.alpha.$^{-1}$ ). It was formed that the threshold voltage depends on thickness, electrode distance, annealing time and temperature, respectively. The threshold voltage is increased as the thickness and the electrode distance is increased, while the threshold voltage is decreased in proportion to the increased annealing time and temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.113-114
• /
• 2008

Conventional furnace annealing (CFA) for activating Mg-doped p-type GaN films had been performed in pure $N_2$ ambient. All sample activated the same gas ambient. The annealing process change temperature: the first process is performed at $550^{\circ}C$ for 10 min. but, the first process is the same bulk. From second to five process increase activation temperature to change $50^{\circ}C$ and annealing time keeping for 10 min. It is found that the samples characteristic measure hall measurement. Similar results were also evidenced by photoluminescence (PL) measurement.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.126-131
• /
• 2001

One of the major obstacles in testing or evaluating precisely the thermal behavior of a machine tool is the difficulty in measuring the heat transfer coefficients on the surfaces by a conventional method. This paper presents a new approach based on the inverse method to identify the values of heat transfer coefficients by using temperature changes measured on the surfaces of a machine tool during a short period in its operating. In the present method, a machine tool structure is modeled by the finite element method and the characteristic curves of the temperature change at several points on machine tool surfaces are theoretically derived in the form that they contain the heat transfer coefficient as an unfixed heat source are approximated so that the theoretical characteristic curves of temperature change fit the measured ones as closely as possible.