• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1002-1008
• /
• 2014

This paper describes insulation design and its reliability evaluation of ${\pm}80kV$ HVDC XLPE cable. Recently, the construction of HVDC transmission system, which is combined overhead line with underground cable, has been completed. This system is installed with existing 154 kV AC transmission line on the same tower. In this paper, the lightning transient analysis is firstly reviewed for selection of basic impulse insulation level and nominal insulation thickness. Then the electrical performance tests including load cycle test and superimposed impulse test based on CIGRE TB 496 are performed to evaluate the reliability of newly designed HVDC cable. There is no breakdown for ${\pm}80kV$ HVDC XLPE cable during electrical performance test. Finally, this system is installed in Jeju island based on successful electrical performance test (Type test). After installation tests are also successfully completed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.325-332
• /
• 2014

High cognitive workload decreases a driver's ability of judgement and response in traffic situation and could result in a traffic accident. Electrocardiography (ECG) has been used for evaluation of drivers' cognitive workload; however, individual differences in ECG response corresponding to cognitive workload have not been fully considered. The present study developed an evaluation method of individual driver's cognitive workload based on ECG data, and evaluated its usefulness through an experiment in a driving simulator. The evaluation method developed by the present study determined the optimal ECG evaluation condition for individual participant by analysis of area under the receiver operating characteristic curve (AUC) for various conditions (total number of conditions = 144) in terms of four aspects (ECG measure, window span, update rate, and workload level). AUC analysis on the various conditions showed that the optimal ECG evaluation condition for each participant was significantly different. In addition, the optimal ECG evaluation condition could accurately detect changes in cognitive workload for 47% of the total participants (n = 15). The evaluation method proposed in the present study can be utilized in the evaluation of individual driver's cognitive workload for an intelligent vehicle.

• Journal of Information Science Theory and Practice
• /
• v.8 no.2
• /
• pp.68-78
• /
• 2020

This study is a preliminary study to develop an evaluation framework necessary for evaluating the DataON platform. The first objective is to examine expert perceptions of the level of DataON platform construction. The second objective is to evaluate the importance, stability, and usability of DataON platform features over OpenAIRE features. The third objective is to derive weights from the evaluation perspective for future DataON platform evaluation. The fourth objective is to examine the preferences of experts in each evaluation perspective and to derive unbiased evaluation criteria. This study used a survey method for potential stakeholders of the DataON platform. The survey included 12 professionals with at least 10 years of experience in the field. The 57 overall functions and services were measured at 3.1 out of 5 for importance. Stability was -0.07 point and usability was measured as -0.05 point. The 42 features and services scored 3.04 points in importance. Stability was -0.58 points and usability was -0.51 points. In particular, the stability and usability scores of the 42 functions and services provided as of 2018 were higher than the total functions were, which is attributed to the stable and user-friendly improvement after development. In terms of the weight of the evaluation point, the collection quality has the highest weight of 27%. Interface usability is then weighted 22%. Subsequently, service quality is weighted 19%, and finally system performance efficiency and user feedback solicitation are equally weighted 16%.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.27-40
• /
• 2023

This study analyzes the factors affecting the survival of young start-up companies. A youth start-up company was defined as a company with a founder's age under 39. The study was based on evaluation data from 3,540 companies evaluated by the Technology Guarantee Fund to support youth start-up guarantees during the period from 2012 to 2015. In this study, independent variables were defined as founder characteristics, start-up environment, and start-up strategy, and entrepreneurship, knowledge level, and development capabilities were set as variables for start-up characteristics, competition conditions and comparative advantage with alternatives in the start-up environment, and item novelty, commercialization plan and financing plan were set as variables. For variable measurement, the evaluation index of the youth start-up evaluation model of the Technology Guarantee Fund was used. Management performance was defined as the survival of a company, and the survival of 12, 36, 60, and 84 months was measured based on the occurrence of insolvency registered by the Korea Technology Guarantee Fund. The Cox proportional risk model was used for hypothesis testing. As a result of the analysis, knowledge level and development capability were statistically significant in the characteristics of the founder, and the financing plan in the start-up strategy was statistically significant regardless of the survival period. Among the start-up strategies, the novelty of the item had a positive effect on survival after 36 months. Entrepreneurship was significant only in 12-month survival. The most important order for survival was identified in the order of financing plan, knowledge level, item novelty and development capability, of which the founder's knowledge level in the beginning and the funding plan in the second half had the greatest impact.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.88-98
• /
• 2004

In recent, Information Technology(IT) is the biggest issue on the social whole including the construction industry. IT is recognized as a key strategic means to reinforce competitive power and raise the effectiveness. However, CEOs of each firm have trouble with IT investment decision-making. Because there is neither any case to measure real value of IT nor any confidence to economic effect of information system. IT evaluation is so helpful for most construction firms to make a plan of IT investment. In addition, which will eventually facilitate to achieve their management goal and have the maximum of the firms' value. Therefore, the purpose of this research is to develop IT evaluation system for monitoring IT level continually. And this will be enable a construction company to increase IT investment and improve the level of IT in the construction industry.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.41-55
• /
• 2018

For several decades, attribute classification methods using the asymmetrical relationship between an attribute performance and the satisfaction of that attribute have been explored by numerous researchers. In particular, the Kano model, which classifies quality attributes into 5 elements using simple questionnaire and two-dimensional evaluation table, has gained popularity: Attractive, One-dimensional, Must-be, Indifferent, and Reverse quality. As Kano's model is well accepted, many literatures have introduced categorization methods using the Kano's evaluation table at attribute level. However, they applied different terminologies and classification criteria and this causes confusion and misunderstanding. Therefore, a criterion for quality classification at attribute level is necessary. This study is aimed to suggest a new attribute classification method that sub-categorizes quality attributes using 5-point ordinal point and Kano's two-dimensional evaluation table through an extensive literature review. For this, the current study examines the intrinsic and extrinsic problems of the well-recognized Kano model that have been used for measuring customer satisfaction of products and services. For empirical study, the author conducted a comparative study between the results of Kano's model and the proposed method for an e-learning case (33 attributes). Results show that the proposed method is better in terms of ease of use and understanding of kano's results and this result will contribute to the further development of the attractive quality theory that enables to understand both the customers explicit and implicit needs.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.146-152
• /
• 2017

Recently, countries in the South-east Asia are making efforts to enhance the construction industry system and introduce the construction management system. However, it is challenging to apply construction management in site due to lack of technology and professionals for CM. This can result in frequent safety accidents, cost overrun, schedule delay, etc. Therefore, it is necessary to carry out a clear evaluation of the overall situation regarding the level of technology and required competency. The objective of this research is to investigate on which management skills and items for CM are required to improve the construction management skills in South-east Asian construction industry. As a result of the questionnaire, most of the officials selected that the design phase and the construction phase are important works, and the engineers evaluated activities during the bidding phase, the design phase and the construction phase as important works for construction management. However, in most of the results, it was observed that the current competency of Vietnam construction is insufficient compared to the evaluated importance of the skills. This can be explained by the fact that they are not capable of managing construction projects effectively as compared to the importance. The results can help to realize the inadequate aspects of local construction industry, which will be the basis of improvements. Also, it is expected to be supportive to improve construction management in the countries and also provide indicators related to work stage or technology that should be acknowledged when establishing the advancing strategy for Southeast Asian countries in the future.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.38-46
• /
• 2005

The destructive method is reliable and widely used for the estimation of material degradation but it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials used at high temperature by nondestructive evaluation such as electric resistance method, replica method, Barkhausen noise method, electro-chemical method and ultrasonic method are strongly desired. In this study, various nondestructive evaluation(NDE) parameters of the Barkhausen noise method, such as MPA(Maximum Peak Amplitude), RMS, IABNS(Internal Area of Barkhausen Noise on Signal) and average amplitude of frequency spectrum are investigated and correlated with thermal damage level of 2.25cr-1.0Mo steel using wavelet analysis. Those parameters tend to increase while thermal degradation proceeds. It also turns out that the wavelet technique can help to reduce experimental false call in data analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.141-146
• /
• 2007

A gear whine sound due to the axle system is one of the most important sound qualities in a sport utility vehicle (SUV). In the previous research about the gear whine sound, it was known that it is difficult to evaluate the gear whine sound objectively by using the only A-weighted sound pressure level because of the masking effect. In this paper, for the objective evaluation of the axle-gear whine sound, the characteristics of the axle-gear whine sound is at the first investigated based on the synthetic sound technology and the new objective evaluation method for the axle-gear whine sound is developed by using the sound metrics, which is the psychoacoustics parameters, and the artificial neural network (ANN) used for the modeling of the correlation between objective evaluation and subjective evaluation.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.4
• /
• pp.535-541
• /
• 2022

The radical reaction position was calculated by varying the calculation level for ACEL and ANT, which are detected with the highest frequency and concentration in PAHs pollution sites. The results of each calculation level were compared and evaluated with the existing literature. HF, B3LYP, B3LYP-D, and MP2 were used as the method for each level used for calculation. Except for HF, the MK charge by B3LYP, B3LYP-D, and MP2 was consistent with the experimental results. It was found that the dispersion effect was negligible in the calculation of ACEL and ANT because the calculation results by the B3LYP and B3LYP-D methods were the same. In particular, it was found that the MK charge calculation result by MP2 agrees well with the product/PAH ratio obtained as a result of the experiment. Considering the calculation cost, it would be preferable to use B3LYP to predict the radical reaction site of ACEL and ANT. However, considering the product/PAH ratio, it takes more time to calculate, but it is judged that it is better to use the MP2.