• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.29-38
• /
• 2009

This paper surveys the historical perspective and design considerations for developing the human powered aircraft(HPA). Especially the weight and materials, aerodynamics, flight controls, and power trains are focused. The average power a human can produce and sustain is approximately 200${\sim}$250 W which is a critical design constraint of HPA. The survey shows that the empty weight of HPA was in the 30${\sim}$40 kg range(90${\sim}$110 kg include pilot). Thus, in order to design a successful HPA, the value of power to weight ratio should be 2.0 W/kg or above. The HPA design technique could be applied directly to the development of an unmanned high altitude airplanes used for atmospheric research, where light structures, low Reynolds number aerodynamics and high efficiency propeller design are required as well.

• Steel and Composite Structures
• /
• v.34 no.3
• /
• pp.441-452
• /
• 2020

Within the French CIFRE research project COMINO, an innovative type of composite beam was developed for buildings that need fire resistance with no additional supports in construction stage. The developed solution is composed of a steel U-shaped beam acting as a formwork in construction stage for a reinforced concrete part that provides the fire resistance. In the exploitation stage, the steel and the reinforced concrete are acting together as a composite beam. This paper presents the investigation made on the load bearing capacity of this new developed steel-concrete composite section. A full-scale test has been carried out at the Laboratory of Structural Engineering of the University of Luxembourg. The paper presents the configuration of the specimen, the fabrication process and the obtained test results. The beam behaved compositely and exhibited high ductility and bending resistance. The shear connection in the tension zone was effective. The beam failed by a separation between the slab and the beam at high deformations, excessive shear forces conducted to a failure of the stirrups in this zone. The test results are then compared with good agreement to analytical methods of design based on EN 1994 and design guidelines are given.

• International Journal of Advanced Culture Technology
• /
• v.1 no.1
• /
• pp.19-22
• /
• 2013

The basic principle of the product manufacturing technology using the 3D printing technique materializes the material including the high molecular substance or plastic and metallic dust, and etc. the product into the laminate additive manufacturing according to the design diagram gradually. It is applied to the various industrial field including the field of food division, field of home appliances, field of medicine, field of mechanical department and construction, etc.. The global development case of 3D printing technique is the next. This study described global technology and market trends. Afterward, 3D printing technique manages the important role when it exceeds the product manufacturing view just and is grafted with the various technology including the biotechnology, nanotechnology, and etc. and it improves the quality of the human life.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.603-608
• /
• 2011

In recent years, numerous mega-sized and complex civil infrastructures are being constructed all over the world. Therefore, more precise construction and maintenance technologies are required for these complicated construction projects. Especially, exact strength measurement and curing process monitoring of the concrete structures are very crucial to confirm the safety and effectiveness of these complicated structures. In this paper, a new Quick Response (QR) code-based concrete strength labeling technique using embedded self-sensing monitoring system is introduced. It is important to note that the QR code-based concrete labeling technique enables easy access of the databases related to the concrete strength at anytime, anywhere, and any smart PC devices. Finally, by integrating the proposed QR code-based concrete labeling with the concrete strength databases already prepared at a designated web-server, a feasibility of the current system is investigated for a next generation concrete life-cycle quality maintenance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.1
• /
• pp.39-52
• /
• 1987

Recently, the design problem of heat insulation have been reappraised in the aspect of energy saving due to the rising trend of energy cost. For example, that design problem is increasingly requsted in the fields of accommodation air conditioning systems, hot water supply systems, cargo handling systems, district heating or cooling systems. The rational design of heat insulation of piping systems can not only improve the overall efficiency of energy transfer but also give energy saving. In this paper, the heat insulation problem of district heating systems is therefore modeled as the multi-stage decision processes, suitable for dynamic programming technique. And take the object function as the sum of heat insulation material cost involved construction cost and heat loss cost, and propose the design method to minimize the object function for overall piping systems by dynamic programing. Effectiveness of design method presented here is proved by a computer simulation.

• Journal of Coastal Disaster Prevention
• /
• v.5 no.4
• /
• pp.163-172
• /
• 2018

To propose the design technique and the execution manual of the LWFS(Lightweight Foamed Soil) method using dredged soil, the operation system for the test-bed integrated management, and to establish an amendment for the domestic quantity per unit and specifications, and a strategy for its internationalization. In order to utilize the dredged soil from the coastal area as a construction material, we constructed the embankment with LWFS on soft ground and monitored its behavior. As a result, it can be expected that the use of LWFS as an embankment material on the soft ground can improve the economic efficiency by reducing the depth and period of soil improvement as well as the uses of nearby dredged soil. To verify the utilization of the dredged soil as a material for light-weighted roadbed, soft ground and foundation ground, and surface processing, perform an experimental construction for practical structures and analyze the behavior. It is expected to be able to improve the soft ground with dredged soil and develop technique codes and manuals of the dredged soil reclamation by constructing a test-bed in the same size of the fields, and establish the criteria and manual of effective dredged soil reclamation for practical use. The application technology of the dredged soil reclamation during harbor constructions and dredged soil reclamation constructions can be reflected during the working design stage. By using the materials immediately that occur from the reclamation during harbor and background land developments, the development time will decrease and an increase of economic feasibility will happen. It is expected to be able to apply the improved soil at dredged soil reclamation, harbor and shore protection construction, dredged soil purification projects etc. Future-work for develop the design criteria and guideline for the technology of field application of dredged soil reclamation is that review the proposed test-bed sites, consult with the institutions relevant with the test-bed, establish the space planning of the test-bed, licensing from the institutions relevant with the test-bed, select a test-bed for the dredged soil disposal area.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.15-24
• /
• 2012

The purpose of this study is to understand children's participating behavior on the environment-improving process of a community child center, and to develop participating technique and tools that can be appliable. For this, a workshop, constructions, and an evaluation research were done on the premise that children participate in process of designing a community child center. The result of study is as follows. (1) A survey chart, questionaries, preference image chart, and attitude measurement chart used in this study were easy to understand, simple, and thus found to be a useful technique and tool that could make children participate more active and interested. (2) As children participated more on the environment-improving process of community child centers, their demands became more diverse and specific, and their levels of satisfaction were high. (3) The change of satisfaction level before construction and after, and consistent demands for the separation of studying space between upper and lower graders show that children understand their physical environment changes well, and have clear ideas on how their studying space should be composed.

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2015

Modular technology has become a major issue of the construction industries to enhance their productivity. Modular bridge construction generally requires the data exchange between the contractors, designers, fabricators and constructors. Therefore, a readily accessible information model interface module based on BIM technology is essential for their communication during a project life-cycle. In this study, BIM based information model interface module for a modular pier was developed. For the information models, the PBS(Product Breakdown Structure) and LOD(Level of Development) were defined. Next, all components of a modular pier were conducted by the parametric modeling technique, and then 3D cell library interface was developed. An nterface module was also developed using VBA(Visua basic Application) for exchanging a data from 3D model library to other softwares such as Microstation, AutoCad and Excel and was connected with MS Access database. The developed information model interface module would improve the design quality of the modular pier and reduce the time and cost for design. Updated 3D information models could be utilized for the fabrication, assembly, and construction process for modular piers.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1750-1756
• /
• 2011

After Kyoto Protocol was adopted for green gas reduction, each nations are stepping up efforts to reduce $CO_2$ of a typical green gas. Construction industry also is trying $CO_2$ reduction with the techniques of two types which are software and hardware techniques. The software technique are Passive Design considered green gas emission and the environment impact assessment by LCA. The hardware techniques are adjustment of equipment system and development of eco- friendly material. But, it is nonexistent that a study related to $CO_2$ emission considered detail process in construction industry. This study analyzed the relativeness of equipment combination and $CO_2$ emission by calculate $CO_2$ emission follow to equipment combination on earth-work which is the process emitted most $CO_2$ among railway bedding construction.

• Journal of the Korean Professional Engineers Association
• /
• v.27 no.3
• /
• pp.121-131
• /
• 1994

It is very difficult to partially describe the hull shape made up of 3-dimensional free form surface. With computerizing skill in ship design, the geometric modeling technique has been developed. In hull shape modeling, the blending technique has not yet been adapted to the hull shape surface has a variable curvature. By adapting the blend surface, small surface on drawing plane is to be softly blended with given hull surface and a projecting part. This study has adapted to the ship design one of the blending methods by which offsets data of the blend surface can be obtained by the input of blend radius on two base surfaces.