• 한국융합학회논문지
• /
• 제4권1호
• /
• pp.1-7
• /
• 2013

본 연구는 자전거 안전 시스템 장치 개발에 관한 연구과제로 대상기술의 개요, 기술개발의 필요성 및 성공 시 파급효과, 기술개발의 목표, 개발방법, 기술개발 성공 시 판매 수출 등 사업화 방법, 시작품 성능 및 제원(speculation)에 대해 다음과 같은 연구 계획을 가지고 추진하였다. 대상기술(제품)의 개요는 이동시 안전운행을 위한 장치의 개발 및 고가의 자전거를 위한 보관 시 안전장치 개발에 있다. 기술개발의 필요성(기존의 애로사항 등) 및 성공 시 파급효과로는 자전거 보급 확대에 따른 이동량 증가에 따라 각종 안전사고 발생을 줄일 필요가 대두되었고, 욕구의 다양화로 고가의 자전거 보급이 늘어남에 따라 도난, 분실 등의 사고가 우려되어 개발하게 되었고, 안전사고를 미연에 방지하므로 부상치료, 재산손실에 대한 경제적 손실 억제하는 효과를 가지고 있다. 기술개발의 목표는 자전거 운행시 안전한 방향전환을 위한 시그널장치, LED 헤드라이트와 도난을 대비한 도난방지 시스템을 사용자가 별도의 도움 없이 혼자서 손쉽게 장착할 수 있는 장치를 개발하는데 있다.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.69-79
• /
• 2019

This study aims to seek knitting methods that can enhance the neck design of seamless knitwear and to find out how to improve the designs by comparing and analyzing the characteristics of the knitting methods used for v-neck pullovers. The investigator analyzed the characteristics of the knitting methods and assessed the wearing sensation by using six different pieces of clothing for the experiment. The results were analyzed based on a variance analysis (ANOVA). Among the items showing significant results, the Duncan-test was used for more intensive research. As a result, while using the basic pattern of knitting methods, Experiment Clothes A ended up binding on the back neckline, and not making the hem of back. Also, the neck was the widest. In the case of the special neck, Experimental Clothes B (1:1), which had the least number of the knitting course in relation to the knitting ratio, the bottom part of the back body had the most wrinkles. According to the result of wearing sensation, the front part, the side part, and the back part showed similar results (p<0.000) in all items. Specifically, the appearance of the Experiment Clothes A (normal) in both the front and rear aspects were evaluated as the best. In the case of the special neck, the Experimental Clothes F was ranked the highest, whereas the Experimental Clothes B (1:1) was ranked the lowest. Based on the results of the study, it seems possible to provide concrete and technical data for the planning of unique and productive designs. With regard to seamless knitwear neck designs, a comparative analysis of the knitting method of v-neck pullovers will be of practical use in the development and manufacturing of the product.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.81-86
• /
• 2013

Purpose: Recently, domestic and abroad consumption of mushroom has been increasing. Especially, oyster mushroom has been the most consumed product, sharing one third of the mushroom market. The air temperature differences between relative positions of the mushroom farms were needs to be minimal. However, in reality, the air temperature differences ranged from 2 to $5^{\circ}C$. Because of this, the mushrooms are non-uniform growth as well as decrease in both quality and quantity. Although air circulators have been employed by oyster mushroom farms to minimize air temperature differences, no experiments have been performed to illustrate the effect of the air circulators. Methods: This experiment is designed to analyze the effect of the air circulation by constructing a prototype air circulator and measuring the air temperature when the circulator was position at different heights (50 cm, 150 cm, 200 cm) from the floor in the center. Result: The horizontal plane air temperature of the first growing bed when the air circulator was installed 50cm above the floor in the center, once not using the air circulators and the other time using the air circulators, yielded the air temperature differences of $8.6^{\circ}C$ and $1.8^{\circ}C$ and deviations of 2.82 and 0.60, respectively. The third growing bed's air temperature differences were $10.0^{\circ}C$, $1.6^{\circ}C$ and deviations 3.28, 0.64, each respectively. These outcomes proved that the use of air circulators minimized the air temperature difference and deviation. The use of air circulators helped minimize the air temperature differences and the derivations in oyster mushroom farm. Conclusion: The use of air circulators helped balance the air temperature distribution in oyster mushroom farm.

• 디자인학연구
• /
• 제4권1호
• /
• pp.61-73
• /
• 1991

The exhibition activity that a company is rendering to their consumers for the purpose of advertisement, sales promotion and enhancement of company inage get more and more internationalized and specialized. A company is changing from mass production system to small quantity production of various kinds to meet consumer's individualization and differentiation. Also, a company is experiencing a major change in their marketing strategy. As the society is entering on Information Age, the contents that a company intends to give consumer may be different individually. If a consumer is informed wrong information of the goods, a company needs a place to meet consumer face to face where the consumer feels and understands the substance of the goods. This is the current characteristics of Exhibition Media. Based on the result of the current Special Exhibition home and abroad along with background and characteristics of special Exhibition, this study sets a following task reflecting the general trend of social, cultural and economic atmosphere. First, Current Exhibition Industry will be diversified into more Specialized Exhibition, while our Exhibition Industry is very shaky under severe international competition. Also, Exhibition Plan that involves with architecture, interior, graphic, industrial design and advertisement, etc., needs international competitiveness while enhancing identity of Exhibition Plan along with comprehensive marketing strategy in the future. Second, Among most of the local special Exhibitions which invite the general public are normally invited for company public relation contrary to those of U.S.A. and Europe. This signifies of our industrial and social structure's by-product. As the future exhibition become Information Com$$\mu$ication Exhibition which requires specialized technical explanation, the correct description of the goods should be set as a Judgement basis of Exhibition Plan. Third, In parallel with increase of the Exhibition, the equipment expenses of a company goes up continuously. In view of this, a study $$\mu$t be oriented for re-use and curtailment of expenditure of those equipment. Also, as the use of Assembly System B on the rise as a result of diversification of special Exhibition, a study on the development of new material & design for Exhibition Equipment only B required.

• 한국세라믹학회지
• /
• 제50권5호
• /
• pp.333-340
• /
• 2013

To fabricate spherical lithium titanate ($Li_2TiO_3$) pebbles which are used for a breeder material in fusion reactor, titanium oxide ($TiO_2$) granules were used as a starting material. The granules were pre-sintered, and then aqueous lithium nitrate solution infiltrated into the granules at vacuum condition. The granules were crystallized to $Li_2TiO_3$ after sintering under the control of process parameters. In this study, the concentration of lithium in the solution, as well as the number of penetration times and sintering temperature affected the final crystallite phase and the microstructure of the pebbles. In particular, the sphericity and size of the pebbles were effectively controlled by a technical rolling process. The useful spherical $Li_2TiO_3$ pebbles which have 10~20% porosity and 60~120 N compressive strength were obtained through the sintering at $1000{\sim}1100^{\circ}C$ in the multi-times infiltration process with 50 wt% solution. The physical properties of pebbles such as density, porosity and strength, can be controlled by a selection of $TiO_2$ powders and control of processing parameters. It can be thought that the lithium penetration method is a useful method for the fabrication of mass product of spherical $Li_2TiO_3$ pebbles.

• 청정기술
• /
• 제10권2호
• /
• pp.111-120
• /
• 2004

피혁 탈모 공정 폐수의 질소감소 및 황화물 감소, COD, BOD의 오염부하를 감소할수 있는 탈모공정 처리용 환경 친화적 피혁용 약품을 제조 하였다. 본 연구에서 개발한 Hair saving 공정처리제는 Urea, Mercaptan을 기본 물질로 하는 Liming agent와 Unhairing assist 제품을 제조하였다. Hair saving 공정에 처리한 결과 기존의 Hair burning 방법에 비해 회수된 모의 양이 약 2배 정도 증가하였다. 혁의 품질 및 생산성 평가의 지표인 수율을 좌우하는 Grain상태, 수축현상(Drawing)이 개선이 가능하였다. Wet Blue 및 완성원단에서의 인장, 인열 등의 물성과 Softness및 Touch 등의 가죽 본래의 천연감도 증대되는 효과가 있었다. 또한, 탈모공정후 배출 배수에서의 COD, T-N 농도가 약 50% 이상 감소 가능한 것을 확인 가능하였다.

• 멤브레인
• /
• 제30권1호
• /
• pp.9-20
• /
• 2020

바이오 의약품 생산과정의 대부분 공정에서 분리막이 사용되고 있다. 분리막 공정은 다른 공정의 전처리, 공정 자체의 불순물 분리, 바이러스 제거, 목표 생성물 농도 조절 및 완충 용액 교환 등에 사용된다. 인체에 사용하는 바이오 의약품의 바이러스 오염은 심각한 임상 결과와 직결되는 민감한 문제이기 때문에 바이러스 필터는 제품의 효능과 안정성을 보장하기 위해 중요한 역할을 한다. 바이러스 필터는 일반적으로 표면 개질된 PVDF, PES, CRC 등 다양한 고분자로 만들어진 복합다층 구조를 가지고 있다. 제조업체에 따라 대칭(symmetric) 또는 비대칭(asymmetric) 등 다른 기공 구조와 형태를 가지고 있으며, 주름막, 평판 시트 또는 중공사 형태로 사용된다. 바이러스 필터는 Asahi Kasei 를 비롯해 Millipore, Pall, Sartorius 등 몇몇 해외 업체들이 독점적으로 국내에 공급하고 있다. 바이러스 필터를 대체하려면 검증작업을 통해 규제기관의 승인을 받는 등 상당한 시간과 비용이 소요된다. 최근 일본의 수출규제로 국산화가 중요해진 만큼 제거 성능 고도화 등 선제적으로 기술자립도를 높여가야 한다.

• 대한한의학회지
• /
• 제36권1호
• /
• pp.61-74
• /
• 2015

Objectives: The main purpose of this study is to find a solution for modernized classification of herbal medicinal preparations in dual medical systems. Through this study, we expect to provide a reasonable foundation of herbal medicine for public health. Methods: We studied legal or technical terms of herbal medicinal preparations from the past regulations, and through this procedure, we could suggest clear definitions of terms for herbal medicinal preparations. We also investigated documents for approval of herbal medicinal preparation from US, EU(European union), The People's Republic of China, Japan, so that we can refer to them to revise regulation for appropriate use of herbal preparations. Results: In Korea pharmaceutical affairs act, any basis of 'Crude drugs' does not exist. But in some subordinary notifications, the way that they use the 'Natural product medicine' is used as a means of limiting basic rights of doctor or pharmacist of Korean medicine compared to doctor or pharmacist. At the same time, in subordinary notifications, provisions are vague and not enough for scientific evidence of Korean medicine. Thus, we re-categorized herbal medicinal preparations into new drugs, drugs made from herbal medicinal preparations and suggested requirements for drug approval. Conclusions: Instead of using the term 'Crude drug preparations', and we should use term 'Herbal medicinal preparations' in related act and notification. And also we suggest to amend subordinary regulations and documents for approval of herbal medicinal preparations. Through this, we can make herbal medicinal preparations be more industrialized.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.225-231
• /
• 2002

POSCO $\#2$ Stainless steel making plant produces more than 600 thousand ton per year with a variety of products consisting of austenite and ferrite stainless steel to meet custrmers' needs since 1996. The plant has four different major processes, that are, EAF-AOD-VOD-CC to finally produce semi-product called as slab. In this study, we importantly took AOD process into consideration due to its roles such as to check and verify the final qualities through sampling inspection. But the lead-time from sampling to its verification takes five to ten minutes causing produrtivity loss as muck as the lead-time as a result. Of all indices for quality and process control the plant has, carbon ingredient in liquid type of steel is the most important since it affects in a great way to the characteristics of steel, if any problem. customers not satisfied with quality could issue a claim; therefore there is no way hut to guarantee it before delivery. in this study, to reasonably reduce lead-time ran save a cycle time and finally improve our productivity from a state-or-art alternative just such as applying statistical model based on multi-regression analysis into the A.O.D line by analyzing the statistical and technical relationship between carbon and the relevant some vital independent variables. In consequence, the model with R-square $87\%$ allowed the plant to predict, abbreviating the process in relations to sampling to verification. approximately the value of [C] so that operators could run the process line with reliability on data automatically calculated instead of actual inspection. In the future, we are going to do the best to share this type of methodology with other processes, if possible, to apply into them.

• 산학경영연구
• /
• 제6권
• /
• pp.135-152
• /
• 1993

The optional market segmentation pricing policy for rooms of hotels are investigated under the assumption of a linear demand function, and for four different situations: (1) single price market, (2) optimal segmentation of the unused capacity of a single-price-maeket, (3) optimal segmantation for all rooms, and (4) opimal segmentation for infiltration from higher priced to adjacent lower priced segments. The purpose of tis study is th show that with proper pricing policy, it would be possible to increase profits considerably. Such a profit increase might be achived by market segmentation coupled with product differentiation, where the different market segments are identified, sperated, and in each segment a different price per room is called for. The different prices are determined based on the specific price elasticity typical for each market segment and the relavant costs. The pricing model implied in this study is based on basic economic pricing theory and optimization techniques. While somewhat complex in its mathmatical solution, it can be easily programmed for use by practitioners, avoiding the need to cope with the technical aspects of the solution. In section II-1, the optimal single-market Single-price policy is evaluated. The optimal strategy under the constraint that only the previously unutilized rooms are segmented is analysed in section II-2, while the optimal strategy without this constraint is determined in section II-3. In section II-4, the optimal market-segmentation pricing policy is derived for the case in which market seperation is allowed for all the rooms under the assumption of custtomer infiltration from each market segment to the adjacent lower priced segment Finally, some considerations relating to the practicality of the model as a decision support tool and the requirements for its implementation are discussed in section III.