• Clean Technology
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2004

Manufacturing with a chemical for eco-friendly leather for nitrogen decrease of leather falling hair process waste water and the falling hair process that a number to decrease with sulfuration water decrease, a pollution load of COD, BOD. In this study manufactured lining agent and the unhairing assist product which did urea, mercaptan by basic matter. As a result of having dealt in hair saving process, compared, and was recalled by the existing hair burning process recovered hair, increased approximately 2times. Grain state to influence the yield that was quality of leather and an index of productivity evaluation, an improvement of contraction phenomenon (drawing) were possible. Is increased going seal, tear strength property of matter and softness and touch leather native nature in wet blue. Also, it is possible confirmation with decrease being more possible than about 50% COD, T-N density in a hair saving waste water.

• Membrane Journal
• /
• v.30 no.1
• /
• pp.9-20
• /
• 2020

Membranes are used in most processes of biopharmaceutical production. It is used for pretreatment of other processes, separation of impurities in the process, virus removal, control of products concentration and buffer solution exchange. Virus filters play an important role in ensuring product efficacy and stability because viral contamination of biopharmaceuticals for humans is a sensitive issue that is directly related to serious clinical outcomes. Virus filters typically have complex multilayer structures made of various polymers such as surface-modified PVDF, PES, CRC. Depending on the manufacturer, filters have different pore structures and shapes, such as symmetric or asymmetric, and is used in the form of pleated membrane, flat sheets or hollow fibers. Virus filters are exclusively supplied by few foreign companies such as Asahi Kasei, Millipore, Pall and Sartorius. Replacing virus filters can be time consuming and expensive, including approval from regulatory agencies through validation. As localization has become important due to Japan's recent export regulations, it is necessary to increase the degree of technical independence.

• The Journal of Korean Medicine
• /
• v.36 no.1
• /
• pp.61-74
• /
• 2015

Objectives: The main purpose of this study is to find a solution for modernized classification of herbal medicinal preparations in dual medical systems. Through this study, we expect to provide a reasonable foundation of herbal medicine for public health. Methods: We studied legal or technical terms of herbal medicinal preparations from the past regulations, and through this procedure, we could suggest clear definitions of terms for herbal medicinal preparations. We also investigated documents for approval of herbal medicinal preparation from US, EU(European union), The People's Republic of China, Japan, so that we can refer to them to revise regulation for appropriate use of herbal preparations. Results: In Korea pharmaceutical affairs act, any basis of 'Crude drugs' does not exist. But in some subordinary notifications, the way that they use the 'Natural product medicine' is used as a means of limiting basic rights of doctor or pharmacist of Korean medicine compared to doctor or pharmacist. At the same time, in subordinary notifications, provisions are vague and not enough for scientific evidence of Korean medicine. Thus, we re-categorized herbal medicinal preparations into new drugs, drugs made from herbal medicinal preparations and suggested requirements for drug approval. Conclusions: Instead of using the term 'Crude drug preparations', and we should use term 'Herbal medicinal preparations' in related act and notification. And also we suggest to amend subordinary regulations and documents for approval of herbal medicinal preparations. Through this, we can make herbal medicinal preparations be more industrialized.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.225-231
• /
• 2002

POSCO $\#2$ Stainless steel making plant produces more than 600 thousand ton per year with a variety of products consisting of austenite and ferrite stainless steel to meet custrmers' needs since 1996. The plant has four different major processes, that are, EAF-AOD-VOD-CC to finally produce semi-product called as slab. In this study, we importantly took AOD process into consideration due to its roles such as to check and verify the final qualities through sampling inspection. But the lead-time from sampling to its verification takes five to ten minutes causing produrtivity loss as muck as the lead-time as a result. Of all indices for quality and process control the plant has, carbon ingredient in liquid type of steel is the most important since it affects in a great way to the characteristics of steel, if any problem. customers not satisfied with quality could issue a claim; therefore there is no way hut to guarantee it before delivery. in this study, to reasonably reduce lead-time ran save a cycle time and finally improve our productivity from a state-or-art alternative just such as applying statistical model based on multi-regression analysis into the A.O.D line by analyzing the statistical and technical relationship between carbon and the relevant some vital independent variables. In consequence, the model with R-square $87\%$ allowed the plant to predict, abbreviating the process in relations to sampling to verification. approximately the value of [C] so that operators could run the process line with reliability on data automatically calculated instead of actual inspection. In the future, we are going to do the best to share this type of methodology with other processes, if possible, to apply into them.

• Korean Business Review
• /
• v.6
• /
• pp.135-152
• /
• 1993

The optional market segmentation pricing policy for rooms of hotels are investigated under the assumption of a linear demand function, and for four different situations: (1) single price market, (2) optimal segmentation of the unused capacity of a single-price-maeket, (3) optimal segmantation for all rooms, and (4) opimal segmentation for infiltration from higher priced to adjacent lower priced segments. The purpose of tis study is th show that with proper pricing policy, it would be possible to increase profits considerably. Such a profit increase might be achived by market segmentation coupled with product differentiation, where the different market segments are identified, sperated, and in each segment a different price per room is called for. The different prices are determined based on the specific price elasticity typical for each market segment and the relavant costs. The pricing model implied in this study is based on basic economic pricing theory and optimization techniques. While somewhat complex in its mathmatical solution, it can be easily programmed for use by practitioners, avoiding the need to cope with the technical aspects of the solution. In section II-1, the optimal single-market Single-price policy is evaluated. The optimal strategy under the constraint that only the previously unutilized rooms are segmented is analysed in section II-2, while the optimal strategy without this constraint is determined in section II-3. In section II-4, the optimal market-segmentation pricing policy is derived for the case in which market seperation is allowed for all the rooms under the assumption of custtomer infiltration from each market segment to the adjacent lower priced segment Finally, some considerations relating to the practicality of the model as a decision support tool and the requirements for its implementation are discussed in section III.

• Korean Business Review
• /
• v.11
• /
• pp.15-38
• /
• 1998

This study explores the evolution of technical innovation over time. It focuses on sectors of the information technology because this industry can be referred to as one of the most dynamic industries of all times. Following evolutionary theorists, we argue that technological change is gradual and that superior firms and technologies are reward by the' selection' environment. In the initial phase of the industry life cycle, technological change is expected to be radical and uncertainty is high. Over time a product or technology is likely to arise which stands out above all other products or technologies. These so-called 'basic designs' serve as sorts of 'technological guideposts' for further developments in the technology. Once a basic design established, technological progress tends to follow consistent paths or trajectories. The cumulative character of technological progress facilitates a rapid expansion of the boundaries of the technology until the natural limits of the technology are approached and technological progress slows down. Following ecological theories, supply-side developments in the industry are described on the basis of five different organizational types. On the basis of this pattern of market and technological evolution we came up with seven basic propositions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.55-66
• /
• 2017

Korean small and medium sized software companies have tried to export their solutions or services to overseas markets. In 2016, exports of the software industry increased by 6.0% from the previous year, and the value added of the industry was 2.2 times higher than that of the manufacturing industry. From a long-term perspective, it is important to secure a global competitive advantage in order to sustain the export high value-added of the software industry. The obstacles to entry into the overseas market of small to medium enterprises are as follows: first, difficulty in product development and localization of marketing; second, lack of investment for overseas expansion; and finally, competitiveness of software technology. In particular, To overcome such obstacles, Korean small and medium sized software companies should increase the technical perfection and secure software export competitiveness. The paper presents a payment settlement framework enabling adaptive reuse and semiautomatic development of global payment settlement services. The quantitative and qualitative evaluation results are presented with domestic and overseas case studies as follows: Firstly, semi-automatic development is realized successfully by applying the framework. Secondly, it is possible to maintain consistent quality of software and to deliver maintenance services without relying on the internal human resources. Thirdly, it is possible to reduce the project duration of the same development cope to less than 50% by applying the framework. Finally, because it is based on BPMN 2.0, which is a high level design diagram, it is expected that it will be easy to implement through components connection and reduce difficulties in technology transfer and localization. Also, at the time of runtime operation, it will be effective to understand the design idea easily and to carry out additional developments without human resource who participated in the initial project.

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.191-197
• /
• 2017

This development is for non-destructive machine using X-Ray source about detecting outline faults of below middle size products. The differentiation is product of research and development unspecialized small and medium-sized products using X-Ray light sources can check real time if the surface of an external fault of radiation dose reference, within the leakage. The speed control is possible by software solution. In addition, we're working on possibly block doors for worker safety and equipment at the same time that inner drive can be identified in the image. These principles, as a key enabler of the current inspection system such as the container is small to medium-sized parts - a long way from utilization level is possible. This research will give rise to major effects for other various non-destructive market industries except car-industry. The most important fact is that this developed non-destructive machine is controlled below $0.2micro-S{\mu}v$.

• Journal of Digital Contents Society
• /
• v.18 no.8
• /
• pp.1585-1591
• /
• 2017

In this study, we propose the application of exhibition contents using virtual environment technology in exhibition space. Research on the virtual environment is continuing. Particularly, research on virtual reality technology is one of the most active research fields. As researches and developments of augmented reality technologies have been carried out with the spread of smart phones, researches on virtual reality technologies have also made a lot of progress with emphasis on games and interactivity. Especially, development of hardware, software, and content is accelerating this year, including the development of various types of physical reality devices, especially HMD (Head Mounted Device) equipment and new product announcements. We want to study and apply the environment in which the system based on this virtual reality technology can approach and experience more user friendly in the exhibition space.

• Journal of Convergence for Information Technology
• /
• v.8 no.2
• /
• pp.91-103
• /
• 2018

Refactoring is an engineering technique for securing the quality of existing legacy code, improving the internal structure without changing the functionality of the software. Along with the reuse of open source software, reuse of source code through programming language conversion is increasingly required due to technical or market requirements. In this situation, the refactoring technique including language conversion as well as energy efficiency is considered to be an important means for improving the productivity and the quality of embedded software development. This paper proposes a code refactoring technique that converts the grammar and structure of a programming language into those of a different language through comparison and mapping, in addition to the existing energy efficient refactoring technique. The use of the proposed refactoring technique can expect to improve the competitiveness of the product through rapid software development and quality improvement by coping with the environment change of the software development language and enhancing the reuse of the existing code.