• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.332-333
• /
• 2008

This paper presents an estimation method of national wind resource potential using a national and GIS(Geographical Information System). The wind resource potential is classified into theoretical, geographical and technical potentials and each category narrows down the previous definition by excluding impossible area to be developed as a wind farm using GIS datasets for onshore and offshore. As a basic unit of wind energy potential at a certain area, API(Average Power Intercepted) is calculated from WPD(Wind Power Density) given by a national wind map which is established by numerical wind simulation, so that a logical and relatively accurate potential estimation is possible comparing with other methods based on a field measurement interpolation which is inevitable to avoid critical assumptions.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.1-7
• /
• 2008

The wind resource potentials of South Korea are estimated as preliminary stage using the national wind map which has been being established by numerical wind simulation and GIS (Geographical Information System) exclusion analysis. The wind resource potentials are classifying into theoretical, geographical, technical and implementation potentials and the calculation results are verified by comparing to other countries' potentials. In GIS exclusion, urban, road, water body, national parks and steep slope area are excluded from onshore geographical potential while water depth and offshore distance from the shoreline are applied as offshore exclusion conditions. To estimate implementation potential, dissemination records of European countries are adopted which is about 1/8 of geographical potential. The implementation potential of South Korea would correspond 12.5GW which is 1.7 times of the national wind energy dissemination target until 2030.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.1-6
• /
• 2010

A new testing method named pitch deposit tester (PDT) was developed by KRICT in order to evaluate the deposit potential of micro-stickies. The new method involves depositing the potential pitch particles on the air bubble covered plastic film set in the pitch deposit tester (PDT) and analysing the deposited area by an image analyzer. In this study, the effect of fixing agents on potential pitch deposition was elucidated. The effects of some fixing agents (polyamine and polyethyleneimine) on pitch control were investigated by the PDT test of 100% recycled newsprint stock. The study suggested that proper use of the PEI can lead to better pitch control than that of polyamine. The efficiency of novel screening method using the PDT and retention and drainage analyser (RDA) for fixing agents in terms of retention and deposit contamination could be confirmed by above mentioned results.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.1-9
• /
• 2005

Many factors which affect the adsorption of cationic polymers on fibers and fines have been investigated by many researchers that include contact time, pH, collision frequency, properties of cationic polymers and adsorbent, etc. But the effect of white water quality on the adsorption of cationic polymer have not been examined throughly. In this study, the adsorption of cationic PAM was analyzed as a function of white water quality. The adsorption of the cationic PAM was analyzed by two analysis methods, Kjeldahl nitrogen content measurement and electrokinetic measurements. When the distilled water was used, adsorbed amount of C-PAM and zeta-potential of fibers increased as a function of the addition of C-PAM. When closure level increased, nitrogen content of fibers increased indicating that the cationic PAM was adsorbed. Zeta-potential of fibers, however, showed no significant change with the increased addition of C-PAM. This showed that adsorption of C-PAM was not reflected by zeta-potential of fibers due to the deteriorated efficiency of C-PAM by the anionic contaminants in white water.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.34-39
• /
• 2000

Today's size of production operations in the packaging paper sector I sconstantly increasing , featuring integral processing systems, high-speed paper machines, and the increased marketing of lower basis weight products. The risk factors involved in these large investments lie more than ever in the available furnish potential and ongoing requirements for further closure of water loops and lower operating costs. A comparison is drawn between recovered paper furnish mixtures used in European mills with regard to fibre properties, strength potential and contaminant content, Both the furnish situation and development trends in modern fluting and testliner machines are instigating concept changes in stock preparation, the approach flow as well as in process water and rejects technology. Developments are currently focussed for example on more efficient debris separation using fine slotted screening, optimized refining , more systematic process water management with loop separation and integral water clarification as well as more efficient removal of microstickies, fillers and fines through appropriate combination of rejects handling and water clarification processes. Product quality differentiation depends decisively on strength characteristics as a function of refining , fines removal , paper machine technology, and sizing . Maximum availability of today's high speed paper machines and , as a result, cost effective production can be ensured by optimum balancing of all subsystems with in the overall concept and by reliable control of problems with contaminants and deposits.

• Ocean Systems Engineering
• /
• v.13 no.1
• /
• pp.79-95
• /
• 2023

An onshore dismantling yard is an important part in the supply chain of the offshore oil and gas decommissioning industry. However, despite having more than 500 offshore structures to be decommissioned in the Southeast Asia region, there are a very limited number of well-equipped dismantling yards to fully execute the onshore dismantling. Recent investigations discovered that shipbuilding and offshore structure fabrication yards are still potential options for upgrades to include dismantling. Despite the huge potential opportunities from upgrading to dismantling, research studies on this area are relatively scarce, and most past studies mainly focused on the North Sea region. To date, the potential opportunities of Southeast Asia and Malaysia yards to develop onshore dismantling capability are still unclear. The aim of this study is to identify the criteria to develop a technical preparedness checklist to evaluate an onshore dismantling yard; consequently, this will assist with assessing and bridging the gaps and identify the opportunity of developing an onshore dismantling yard in Southeast Asia region. Requirements for onshore dismantling and related rules and regulations have been investigated and summarized in the form of checklist. Findings from this study can help local oil and gas operators to pursue more local solutions and resilient supply chain performance.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.451-454
• /
• 2004

We studied on the performance optimized synthesis and mapping of design on to one or more FPGA device. Our multi-phased approach optimized the key parameters that affect performance by adequately modeling the impact on wire length, routability, and performance during technology mapping to produce designs that have high performance and high routability potential.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.413-415
• /
• 2006

In this article, we tried to find out the potential of new PVAm (Polyvinylamine) Polymer for optimizing Retention and Drainage system. From the mill experimental in Carton board mill, we could find out PVAm can reduce a significant chemical cost with preserving Drainage. Another case of Newsprint laboratory survey, we could find out the formation benefits from optimizing PAM system to PAM + PVAm dual system.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1033-1034
• /
• 2006

The paper demonstrates OFDM with LDPC and adaptive modulation applied to Multiple-Input Multiple-Output (MIMO) system. An optimization algorithm to obtain a bit and power allocation for each subcarrier assuming instantaneous channel knowledge is used. The experimental results are shown the potential of our proposed system.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.469-481
• /
• 2021

Under Korean law, small-to-medium-sized construction projects with budgets of more than 100 million won and less than 12 billion won must receive technical guidance by a visiting technician belonging to a specialized institution. This study proposed a method for calculating the technical guidance fee to prevent the potential inadequacy of technical guidance when the responsibility providing the technical guidance fee is changed from a contractor to a client. The method simplified the construction works which should receive technical guidance into four sections according to the construction amount. For each section, the number of instances of technical guidance per day provided by the visiting technician and the minimum technical grade of the visiting technician were limited, and the guideline for estimating engineering services fees was applied to calculate the fee per instance of technical guidance. The results show that the proposed method can be applied to the establishment of a technical guidance fee guideline since it well reflects the current fee distribution and K2B analysis results.