• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.22-27
• /
• 2010

Pulping properties of the imported mixed eucalyptus chips and the domestic yellow poplar chips were investigated for comparing two chips as the raw materials for the hardwood chemical pulp. Soda-AQ (anthraquinone) pulping was applied for this study. The pulp from yellow poplar showed higher pulp yield than pulp from mixed eucalyptus, which comes from the lower hot-water soluble extractives and the higher polysaccharides in yellow poplar chips than those of the mixed eucalyptus chips. The yellow poplar pulp had higher average fiber length and fiber width than those of the mixed eucalyptus pulp, which led to the better respond to beating and the higher tear strength than those of the pulp from the mixed eucalyptus chips.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.177-187
• /
• 2016

To evaluate the tractive performance of tracked trencher on seafloor surface, a new shear stress-displacement empirical model was proposed for saturated soft-plastic soil (SSP model). To validate the SSP model, a test platform, where track segment shear test can be performed in seafloor soil simulacrum (bentonite water mixture), was built. Series shear tests were carried out. Test results indicate that the SSP model can describe the mechanical behavior of track segment with good approximation in seafloor soil simulacrum. Through analyzing the main external forces applied to seafloor tracked trencher during the uniform linear trenching process, a drawbar pull prediction model was deduced with the SSP model. A tracked walking mechanism of the seafloor tracked trencher prototype was built, and verification tests were carried out. Test results indicate that this prediction model was feasible and effective; moreover, from another side, this conclusion also proved that the SSP model was effective.

• Journal of the Korean Society of Costume
• /
• v.61 no.9
• /
• pp.131-147
• /
• 2011

This study puts the significance on the trends, the characteristics, the factors and background of the typical diversification of 2000's historical dramas and of their costume in conjunction with the popular culture. We analyzed the materials like the official web-sites, the articles and promotional photos based on 47 TV historical dramas and 21 historical movies. And we, approaching the characteristics of popular culture in connection with the social, cultural, economic, emotional and technical aspects, considered the trends of the historical dramas and their connection with the paradigms of the contemporary popular culture. The results of this analysis are summarized as follows. First, the 2000's historical dramas & their costume, in the process to widen communication with the public, rose the values of popular culture, economic values, traditional values. Second, the diversification of the costumes in historical dramas, derived from the diversification of the era Genre characters and this is related to the characteristics of popular culture in 2000's such as the diversity, the nature of mixture, flexibility and the orientation of variation. Third, the new media environment and the imaging technology of 2000's raised completeness of the historical dramas and their costume. As the technical background placed the emphasis on realistic representation. Fourth, the costume of historical dramas in 2000's reflected the intention of the production in consideration with the emotional aspects of popular culture.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.127-133
• /
• 2015

Recent worldwide trends are to develop the environmental friendly chemicals and processes in order to reduce the global warming and climate change phenomena. One of similar efforts in paper industry is to substitute the petroleum-based SBR latex by starch-based biobinder. The disadvantage of biobinder found through laboratory scale study was the lower dry pick strength than SBR latex. The objective of this study is to confirm the substitutability of SBR latex with biobinder through mill trial. Although biobinder itself gave lower dry pick strength, it was found that the use of SBR latex and biobinder mixture (50:50) could improve the dry pick strength. The introduction of biobinder into coating binder system improved the opacity of coated paper. Optical properties (brightness and whiteness), ink trapping, print gloss and mottling level of paper coated with biobinder system were similar to those of SBR latex.

• Journal of Magnetics
• /
• v.4 no.2
• /
• pp.52-54
• /
• 1999

Injection molding is one of the methods to prepare dielectromagnets-permanent magnets made from hard magnetic powder (or from mixture of powders) bonded by dielectric materials. Magnetic properties of dielectromagnets are worse than those of sintered magnets made from the same hard magnetic powders, but this type of the permanent magnet has many advantages. One of them is simpler technology-easier in comparison to the technology of sintered magnets. The injection molded dielectromagnets do not need any final treatment. This technology permits to control magnetic, thermal and mechanical properties of dielectromagnets. The main chracteristics of dielectormagnets are magnetic properties, however mechanical properties have serious influence onto a range of their applications. The main factors shaping mechanical properties have serious influence onto a range of their applications. The main factors shaping mechanical properties of dielectromagnets are the kind and quantity of resin and the technology. The purpose of this investigateion was to find the correlation between infection conditions and the mechanical properties of dielectromagnets. Influence of two parameters of injection, temperature and pressure on mechanical and magnetic properties of dielectromagnets were not significantly changed. Increasing of pressure of injection also does not influence on mechanical properties of analysed samples, however increasing of temperature of injection significantly improved both compression and bending strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.60-64
• /
• 2009

Paper is easily damaged by physical and chemical deterioration under several factors. Damaged paper cultural heritage is usually restored by Lining. A traditional method of Lining is attaching the lining paper behind the original paper cultural heritage using starch and water. It supports the weakened quality of paper. In Japan, paper cultural heritage is restored with "Washi" which is made from mixture of Paper mulberry and Japanese cedar. In the west, the lining paper made from Paper mulberry, which has extraordinary excellent conservativeness, is usually used as a restoration material for paper. But Japanese Washi has dominated the demand for restoration materials as the most preferred restoration paper, and most kinds of paper made from Paper mullbery have been called as 'Japanese paper'. Result showed that the strength of the Korean lining papers was generally higher than that of the Japanese ones. As a result from measuring the rate of dimensional change after water-immersion and drying, sample B of the Korean lining papers and sample E of the Japanese lining papers showed the highest stability.

• Steel and Composite Structures
• /
• v.47 no.1
• /
• pp.1-17
• /
• 2023

This paper deals with the free vibration behavior of rotating composite beams reinforced with carbon nanotubes (CNTs) under uniform thermal loads. The temperature-dependent beam material is assumed to be a mixture of single-walled carbon nanotubes (SWCNTs) in an isotropic matrix and five different functionally graded (FG) distributions of CNTs are considered according to the variation along the thickness, namely the UD-uniform, FG-O, FG-V, FG-Λ and FG-X distributions where FG-V and FG-Λ are unsymmetrical patterns. Considering the Timoshenko beam theory (TBT), a new finite element formulation of functionally graded carbon nanotube reinforced composite (FGCNTRC) beam is created for the first time. And the effects of several essential parameters including rotational speed, hub radius, effective material properties, slenderness ratio, boundary conditions, thermal force and moments due to temperature variation are considered in the formulation. By implementing different boundary conditions, some new results of both symmetric and non-symmetrical distribution patterns are presented in tables and figures to be used as benchmark for further validation. In addition, as an alternative advanced composite application for rotating systems exposed to thermal load, the positive effects of CNT addition in improving the dynamic performance of the system have been observed and the results are presented in several tables and figures.

• The Korean Journal of Pesticide Science
• /
• v.13 no.2
• /
• pp.111-116
• /
• 2009

Juvenile hormone (JH) is an insect hormone mediating immature metamorphosis and adult reproduction. It also mediates immune responses to suppress hemocyte behavior, which is, however, activated by ecdysteroid. This study investigated an effect of a commercial pyriproxyfen (a JH agonist) formulation on a cellular immune response of the diamondback moth, Plutella xylostella, and analysed its mixture with Bacillus thuringiensis (Bt) in insecticidal potency. The commercial pyriproxyfen formulation significantly suppressed hemocyte-spreading behavior at low doses as did in pyriproxyfen technical grade. When the commercial pyriproxyfen formulation was mixed with Bt, Bt toxicity was significantly increased against P. xylostella larvae in laboratory. The mixture effect was then confirmed in field cultivating cabbage infested with P. xylostella larvae. The mixture showed a significantly enhanced mortality and reduced effective lethal time, compared to only Bt treatment.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.410-416
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA) as starting materials. Subsequently, polyurethane-acrylic hybrid solutions were prepared by reacting the PUD with different types of acrylate monomers, such as HEMA (2-hydroxyethyl methacrylate):MMA (methyl methacrylate), HEMA:BA (butylacrylate), HEMA:BMA (butyl methacrylate), HEMA:HEA (2-hydroxyethyl acrylate), HEMA:PETA (pentaerytritol triacrylate) mixture. Also, the effects of acrylate types on the chemical resistance and the abrasion resistance of polyurethane-acrylic hybrid solutions were investigated. The test results showed that the HEMA:MMA mixture had the strongest chemical resistance, while the HEMA:PETA mixture had the strongest abrasion resistance among several types of acrylate mixtures.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.577-582
• /
• 2012

In this work, vibrational circular dichroism (VCD) technique was applied for the determination of %EE of chiral compounds. It may provide an easy way to determine the %EE with a proper accuracy within 2% error ranges as well as the absolute configuration of enantiomers. We demonstrated herein a flow cell VCD (FT-VCD) technique for time-dependent %EE measurements. The simultaneous monitoring of the mole fraction and %EE for two chiral species (epichlorohydrin and glycidol mixture) in the mixture was shown to be successful without any further separation steps. Thus, we demonstrate that FT-VCD is an appropriate analytical tool to monitor the kinetics of reactions involving chiral molecules. FT-VCD also provides a convenient nondestructive approach for the time dependent determination of the optical purity of individual components in a reaction mixture containing chiral molecules.