• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.46-53
• /
• 1996

Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.

• 대기
• /
• 제29권5호
• /
• pp.689-698
• /
• 2019

Air pollution in urban areas has become a serious problem in the recent years. Especially, high concentrations of particulate matter (PM) cause negative effects on human health. Several studies suggest urban forest as a tool for improving air quality because of the capability of forests in reducing PM concentrations through deposition and adsorption using leaf area. For this reason, the National Institute of Forest Science plans to install in-situ observation stations for PM and biogenic volatile organic compounds (BVOCs) on a national scale to verify the net effect of forests on urban air pollution. To measure the quantitative change of PM concentrations due to the urban forest, stations should be located within and outside the forest area with respect to atmospheric circulation. In this study, we analyze the wind direction at the potential measurement sites to assess suitable locations for detecting the effect of urban forests on air quality in five cities (i.e. Gwangju, Daegu, Busan, Incheon, and Ilsan). This technical note suggests effective locations of in-situ measurements by considering main wind direction in the five cities of this study. A measurement station network created in the future based on the selected locations will allow quantitative measurements of PM concentration and BVOCs emitted from the urban forest and help provide a comprehensive understanding of the forest capabilities of reducing air pollution.

• 지능정보연구
• /
• 제28권4호
• /
• pp.135-155
• /
• 2022

본 연구는 Organic Light-Emitting Diodes(OLEDs) 산업의 하위기술 분야를 도출하여 특허 동향을 분석하고 각 하위기술 분야별 기술 가치, 독창성, 다양성을 분석한다. 특허 자료 수집을 위해 OLED 기술과 관련된 국제 특허 분류(International Patent Classification) 집합을 정의하고, 이를 활용해 2005년부터 2017년까지 출원된 OLED 연관 특허를 수집하였다. 이어서 토픽모델을 이용하여 대량의 특허 문서를 12가지 주요 기술로 구분하고 각 기술에 대한 동향을 조사하였다. 그중 터치 센서, 모듈, 이미지 처리, 회로 구동 관련 특허는 증가 추세를 보였으나 가상 현실, 사용자 인터페이스 관련 특허는 최근 감소하였고, 박막 트랜지스터, 지문 인식, 광학필름 관련 특허는 지속적인 추세를 보였다. 이후 각 기술 그룹에 포함된 특허의 전방 인용 수, 독창성, 다양성을 조사하여 기술적 가치를 비교하였다. 결과로부터 전방 인용 수, 독창성, 다양성이 높은 이미지 처리기술, UI/UX, 모듈 기술, 점착 기술 분야가 상대적으로 높은 기술적 가치를 보여주었다. 본 연구를 통해 기업의 기술 전략 수립과정에서 활용 가치가 높은 정보를 제공한다.

• 시스템엔지니어링학술지
• /
• 제10권2호
• /
• pp.21-31
• /
• 2014

Recently, global market competition of iron and steel products is ever increasing due to over-supply from increased number of industries in rapidly growing countries, such as China, Brazil, and Indonesia. To occupy the big market, major industries are trying to develop high quality, high performance steel products via developing a new iron and steel making process. In other words, development of a new and innovative steel plant is a key to cope with the tough situation. Design and development for the life cycle of iron and steel making plant is very much complex and multi-disciplinary. In this paper, Plant Systems Engineering (PSE), a tailored SE process for industrial plant based on ISO/IEC 15288 is used for the design of Continuous Casting Process (CCP) Plant system. The CCP is a crucial process in steel making plant, whose design technology is occupied by the advanced foreign companies. For the sake of increasing engineering capability for the design of CCP, we applied PSE Process for the renovation of the existing CCP Process. Through the study, we were convinced that the applied method can be used for other plant systems, and SE is really the way of thinking, design, and development of modern complex and multi-disciplinary systems where high risk factors are present throughout the whole life cycle.

• 수산해양교육연구
• /
• 제14권2호
• /
• pp.229-248
• /
• 2002

The primary objective of this study is to firstly survey and analyze the working environment and actual condition, secondly know their problems, and then provide the basic data about how to improve their working conditions. The specific study items for getting the goal above is as follows: 1. How does the industrial company connect with highschool vocational education well? 2. How does the mechanical technical highschool graduate apply with industrial field? The result of study is as follows: 1. In case of employment's information and the industrial educationed cooperation, the workers who has the working history in less than 5 years takes short to find the job. National high school graduates and those who get the job through the school and the teacher changed their job at short period compared to other. 2. There was no benefit about the same major's worker at industrial field. The workers admitted that there is the exemption fo military service and the certification's allowance, only for which is related to their job. The longer the workers stay their job, the more they had the chance to get the exemption of military service. National highschool were carried out the curriculum well as planed especially for their major subjects. Whereas, the public and private highschools weren't. The seniors of their job and the coworkers are very helpful for learning the actual knowledge. The workers said that the school's curriculum and club activity weren't effective applying with their working field. 3. The study says that the important things of their job is the knowledge of their major. Those who 80% answered that the worker must improve the knowledge of their major to be a good engineer. Learning from their senior in working field was very helpful. The question above was ranked as the first. 4. The answer says that the new changed job's pay is more than the previous job. That is, the reason of leaving the job is the pay gap. The most dissatisfaction and problems in present job was the environment of working and the working condition. 5. Regarding to asking next year's plan, the answer says that keeping the job was ranked as the first. That answer means that they conservative.

• Tribology and Lubricants
• /
• 제22권6호
• /
• pp.320-328
• /
• 2006

In this study, the simulation of rolling contact fatigue based on stress analysis is conducted under Elastohydrodynamic Lubrication state. To predict a crack initiation life accurately, it is necessary to calculate contact stress and subsurface stresses accurately. Contact stresses are obtained by contact analysis of a semi-infinile solid based on the use of influence functions and the subsurface stress field is obtained using rectangular patch solutions. And a numerical algorithm using Newton-Rapson method was constructed to calculate the Elastohydrodynamic lubrication pressure. Based on these stress values, several multiaxial high-cycle fatigue criteria are used and the critical loads corresponding to fatigue limits are calculated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.419-419
• /
• 2016

High efficiency silicon solar cell requires the textured front surface to reduce reflectance and to improve the light trapping. In case of mono-crystalline silicon solar cell, wet etching with alkaline solution is widespread. However, the alkali texturing methods are ineffective in case of multi-crystalline silicon wafer due to grain boundary of random crystallographic orientation. The acid texturing method is generally used in multi-crystalline silicon wafer to reduce the surface reflectance. However the acid textured solar cell gives low short-circuit current due to high reflectivity while it improves the open-circuit voltage. To reduce the reflectivity of multi-crystalline silicon wafer, double texturing method with combination of acid and reactive ion etching is an attractive technical solution. In this paper, we have studied to optimize RIE experimental condition with change of RF power (100W, 150W, 200W, 250W, 300W). During experiment, the gas ratio of SF6 and O2 was fixed as 30:10.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.1-6
• /
• 2013

Nowadays, the weight lightening of automotive is required as conserving the environment has become a major worldwide issue. To solve this issue, various researches for the use of light materials(Alalloy, Mgalloy)and ultra high strength steel as substitutes of the current structural material have been carried out. Application of laser stitch welding to the assembly of automotive produces improvement in strength, lightening of body, higher fuel efficiency, lower production cost as well as reduction in assemble line due to its fast welding speed, superior accessible and weld quality. This process overcomes the shortcomings of the current resistance spot welding such as high electricity consumption, electrode replacement, and economical, technical limitation in design and production method of automotives.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2008년도 제39차 동계학술발표논문집 16권2호
• /
• pp.147-152
• /
• 2009

정보 컴퓨터 분야의 실무현장에서 요구하는 인재는 바로 문제해결력과 프로젝트 수행능력을 갖춘 현장적 합성 연재라 하겠다. 본 논문에서는 정보 컴퓨터 분야의 전문계 고교에서 문제해결력과 프로젝트 수행능력을 갖춘 인력을 양성하기 위한 프로젝트식 모둠별 협력 학습 교육과정을 제안하고, 학습을 직접적으로 지원할 수 있는 온라인 평가 시스템을 설계 및 구현한다. 제안하는 시스템을 통해 진행되는 모둠별 학습을 체계적으로 관리할 수 있으며, 향후 같은 교육과정을 이수하는 학습자에게 사례 데이터베이스로서의 역할을 수행할 수 있을 것이다. 또한, 실무능력을 향상시키기 위한 외부전문가의 교과과정 참여를 이끌고 시간 공간적인 제약을 제안하는 시스템을 통해 극복할 수 있을 것이며, 각 진행 단계마다 평가되는 결과를 즉각적이고 다양한 형태로 피드백 해줌으로 해서 학습자는 동기부여와 학습강화 효과를 얻을 수 있다.

• The Journal of Advanced Prosthodontics
• /
• 제1권3호
• /
• pp.129-135
• /
• 2009

STATEMENT OF PROBLEM. Zirconia-based restorations have the common technical complication of delamination, or porcelain chipping, from the zirconia core. Thus the shear bond strength between the zirconia core and the veneering porcelain requires investigation in order to facilitate the material's clinical use. PURPOSE. The purpose of this study was to evaluate the bonding strength of the porcelain veneer to the zirconia core and to other various metal alloys (high noble metal alloy and base metal alloy). MATERIAL AND METHODS. 15 rectangular ($4\times4\times9mm$) specimens each of zirconia (Cercon), base metal alloy (Tillite), high noble metal alloy (Degudent H) were fabricated for the shear bond strength test. The veneering porcelain recommended by the manufacturer for each type of material was fired to the core in thickness of 3mm. After firing, the specimens were embedded in the PTFE mold, placed on a mounting jig, and subjected to shear force in a universal testing machine. Load was applied at a crosshead speed of 0.5mm/min until fracture. The average shear strength (MPa) was analyzed with the oneway ANOVA and the Tukey's test ($\alpha$= .05). The fractured specimens were examined using SEM and EDX to determine the failure pattern. RESULTS. The mean shear strength ($\pm\;SD$) in MPa was 25.43 ($\pm\;3.12$) in the zirconia group, 35.87 ($\pm\;4.23$) in the base metal group, 38.00 ($\pm\;5.23$) in the high noble metal group. The ANOVA showed a significant difference among groups, and the Tukey' s test presented a significant difference between the zirconia group and the metal group. Microscopic examination showed that the failure primarily occurred near the interface with the residual veneering porcelain remaining on the core. CONCLUSION. There was a significant difference between the metal ceramic and zirconia ceramic group in shear bond strength. There was no significant difference between the base metal alloy and the high noble metal alloy.