References
- Tan K, Pjetursson BE, Lang NP, Chan ES. A systemic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clin Oral Implants Res 2004;15:654-66. https://doi.org/10.1111/j.1600-0501.2004.01119.x
- Raigrodski AJ. Contemporary materials and technologies for allceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004;92:557-62. https://doi.org/10.1016/j.prosdent.2004.09.015
- Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia based dental ceramics. Dent Mater 2004;20:449-56. https://doi.org/10.1016/j.dental.2003.05.002
- Tinschert J, Natt G, Mohrbotter N, Spiekermann H, Schulze KA. Lifetime of alumina- and zircoina ceramics used for crown and bridge restorations. J Biomed Mater Res B Appl Biomater 2007;80:317-21.
- Sundh A, Sjogren G. A comparison of fracture strength of yttriumoxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil 2004;31:682-8. https://doi.org/10.1111/j.1365-2842.2004.01284.x
- Sailer I, Pjetursson BE, Zwahlen M, Hammerle CHF. A Systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part II: Fixed partial prostheses. Clin Oral Implants Res 2007;18:86-96.
- Sailer I, Feher A, Filser F. Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up. Quintessence Int 2006;37:685-93.
- Raigrodski AJ, Chiche GJ, Potiket N. The efficacy of posterior threeunit zirconium-oxide-based ceramic fixed partial denture prostheses: a prospective clinical pilot study. J Prosthet Dent 2006;96:237-44. https://doi.org/10.1016/j.prosdent.2006.08.010
- Guazzato M, Proos K, Sara G, Swain MV. Strength, reliability, and mode of fracture of bilayered porcelain/core ceramics. Int J Prosthodont 2004;17:142-9.
- Anusavice KJ. Phillips’science of dental materials. 11th Ed. Philadelphia:W.B. Saunders; 2003, p621-54.
- Ozcan M, Niedermeier W. Clinical study on the reasons and location of the failures of metal-ceramic restorations and survival of repairs. Int J Prosthodont 2002;15:299-302.
- Craig RG, Powers JM. Restorative dental materials 11th ed. Mosby; 2002.
- ISO 9693 Metal-ceramic bond characterization (Schwickerath crack initiation test) Geneva, Switzerland: International Organization for Standardization; 1999.
- Isgro G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 2003;90:465-73. https://doi.org/10.1016/j.prosdent.2003.08.003
- Hara AT, Pimenta LA, Rodrigues AL Jr. Influence of crosshead speed on resin-dentin shear bond strength. Dent Mater 2001;17:165-9. https://doi.org/10.1016/S0109-5641(00)00060-9
- Albakry M, Guazzato M, Swain MV. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J Dent 2003;31:181-8. https://doi.org/10.1016/S0300-5712(03)00025-3
- Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent 2004;91:349-55. https://doi.org/10.1016/j.prosdent.2004.02.009
- Dundar M, Ozcan M, Comlekoglu E, Gungor MA, Artunc C. Bond strengths of veneering ceramics to reinforced ceramic core materials. Int J Prosthodont 2005;18:71-2.
- Dundar M, Ozcan M, Gokce B, Comlekoglu E, Leite F, Valandro LF. Comparison of two bond strength testing methodologies for bilayered all-ceramics. Dent Mater 2007;23:630-6. https://doi.org/10.1016/j.dental.2006.05.004
- Guess PC, Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 2008;24:1556-67. https://doi.org/10.1016/j.dental.2008.03.028
- White SN, Miklus VG, McLaren EA, Lang LA, Caputo AA. Flexural strength of a layered zirconia and porcelain dental allceramic system. J Prosthet Dent 2005;94:125-31.
- Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 2005;21:984-91. https://doi.org/10.1016/j.dental.2005.03.013
- Aboushelib MN, Kleverlaan CJ, Feiler AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: zirconia veneering ceramics. Dent Mater 2006;22:857-63. https://doi.org/10.1016/j.dental.2005.11.014
- de Melo RM, Travassos AC, Neisser MP. Shear bond strengths of a ceramic system to alternative metal alloys. J Prosthet Dent 2005;93:64-9. https://doi.org/10.1016/j.prosdent.2004.10.017
- Mecholsky J. Fractography: Determining the sites of fracture initiation. Dent Mater 1995;11:113-6. https://doi.org/10.1016/0109-5641(95)80045-X
- Kelly JR, Giordano R, Pober R, Cima MJ. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont 1990;3:430-40.
- Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent Mater 2003;19:603-11. https://doi.org/10.1016/S0109-5641(03)00002-2
- Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtenisile bond strength of different componentsof core veneered all-ceramic restorations. Part 3: double veneer tenchnique. J Prosthodont 2008;17:9-13.
- Sobrinho LC, Cattell MJ, Glover RH, Knowles JC. Investigation of the dry and wet fatique properties of three all-ceramic crown systems. Int J Prosthodont 1998;11:255-62.
Cited by
- Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics vol.3, pp.4, 2011, https://doi.org/10.4047/jap.2011.3.4.221
- A comparative study on the fracture behavior of zironia, glass infiltrated alumina and PFM full crown system vol.50, pp.4, 2012, https://doi.org/10.4047/jkap.2012.50.4.235
- Effect of various intraoral repair systems on the shear bond strength of composite resin to zirconia vol.5, pp.3, 2013, https://doi.org/10.4047/jap.2013.5.3.248
- Effects of coloring procedures on zirconia/veneer ceramics bond strength vol.6, pp.6, 2014, https://doi.org/10.4047/jap.2014.6.6.451
- Effect of various intermediate ceramic layers on the interfacial stability of zirconia core and veneering ceramics vol.73, pp.7, 2015, https://doi.org/10.3109/00016357.2014.986755
- Influence of Veneering Fabrication Techniques and Gas-Phase Fluorination on Bond Strength between Zirconia and Veneering Ceramics vol.25, pp.6, 2016, https://doi.org/10.1111/jopr.12451
- The effect of silane applied to glass ceramics on surface structure and bonding strength at different temperatures vol.8, pp.2, 2016, https://doi.org/10.4047/jap.2016.8.2.75
- Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments vol.8, pp.5, 2016, https://doi.org/10.4047/jap.2016.8.5.339
- Veneered Zirconia-Based Restorations Fracture Resistance Analysis pp.1059941X, 2016, https://doi.org/10.1111/jopr.12490
- Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength vol.25, pp.6, 2017, https://doi.org/10.1590/1678-7757-2017-0131
- Effect of Firing Temperature at the Porcelain-Metal Alloy Interface in Porcelain-Fused-to-Metal Restorations. A SEM/EDS Study pp.1059941X, 2018, https://doi.org/10.1111/jopr.12497
- 티타늄 파우더가 금속의 열처리 시 결합강도에 미치는 영향 vol.33, pp.2, 2009, https://doi.org/10.14368/jdras.2017.33.2.71
- Evaluation of mold-enclosed shear bond strength between zirconia core and porcelain veneer vol.37, pp.5, 2009, https://doi.org/10.4012/dmj.2017-339
- Comparison of Adhesion of a Novel Pre-sintered Cobalt-Chromium to Pre-sintered Zirconia and Cast Nickel-Chromium vol.19, pp.7, 2009, https://doi.org/10.5005/jp-journals-10024-2341
- An In Vitro Comparative Evaluation of Shear Bond Strengths of Veneering Porcelain and Different Core Materials vol.19, pp.12, 2009, https://doi.org/10.5005/jp-journals-10024-2446
- 글라스 용융침투 처리가 지르코니아와 초저온 소성 도재와의 전단결합강도에 미치는 영향 vol.56, pp.4, 2009, https://doi.org/10.4047/jkap.2018.56.4.269
- Influence of radius of curvature at gingival embrasure in connector area on stress distribution of three-unit posterior full-contour monolithic zirconia Fixed Partial Denture on various amounts of loa vol.9, pp.4, 2009, https://doi.org/10.4103/jispcd.jispcd_20_19
- Shear Bond Strength of Ceramic Bonded to Different Core Materials and Their Pattern of Failure: An In Vitro Study vol.11, pp.11, 2009, https://doi.org/10.7759/cureus.6242
- Comparing two intraoral porcelain repair systems for shear bond strength in repaired cohesive and adhesive fractures, for porcelain-fused-to-metal restorations: An in vitro study vol.19, pp.4, 2019, https://doi.org/10.4103/jips.jips_120_19
- In Vitro Evaluation of Bond Strength between Zirconia Core and CAD/CAM‐Produced Veneers vol.29, pp.1, 2009, https://doi.org/10.1111/jopr.13068
- Shear Bond Strength of Porcelain Veneering to Nickel-Chromium, Chromium-Cobalt, Zirconia and Lithium Disilicate vol.32, pp.1, 2020, https://doi.org/10.30699/jidai.32.1.2.12