• 산업경영시스템학회지
• /
• 제4권4호
• /
• pp.63-69
• /
• 1981

As enterprises are getting bigger and bigger and more competecious, an engineering economy for the maximization of profit based on basic theory must be considered. This thesis present dynamic computer model for the decision which controls complicated and various man- machine system optimally. This model occur in general stage can be adaptable to every kind of enterprises. So, any one who has no expert knowledge is able to get the optimal solution. And decision tree used in this paper can be applied in every kinds of academic circles as well as whole the industrial world. This paper studied optimal management of engineering project based upon basic theory of engineering economy. It introduces and functionizes the variables which generalize every possible elements, set up a model in order to find out the variable which maximize the calculated value among many other variables. And the selected values ate used as decision- marking variables for the optimal management of engineering projects. It found out some problem of this model. They are : 1. In some kinds of man-machine system it refers to Probability, but other case, it depends on only experimental probability. 2. Unless decision making process (decision tree) goes on, this model can not be applied. So these cases, this paper says, can be solved by adapting finite decision tree which is analyzed by using the same technic as those in product introduction problem. And this paper set up the computer model in order to control every procedure quickly and optimally, using Fortran IV.

• 한국의류학회지
• /
• 제44권2호
• /
• pp.369-383
• /
• 2020

This study proposes a method to effectively teaching technic for pattern development and virtual garment manufacturing by adopting the K-MOOC platform for the Apparel Pattern CAD curriculum. According to K-MOOC guidelines, Apparel Pattern CAD curriculum were developed and presented through the K-MOOC platform. A questionnaire survey was utilized to evaluate K-MOOC platform features in terms of learner satisfaction when adopting the 5-point Likert scale. Questionnaire survey participants included 52 college students. The result of the survey found that most of the attributes of the K-MOOC platform were highly rated in terms of interaction and learning effectiveness. The user interface of the K-MOOC platform were shown to be satisfactory in terms of usability. Participants gave a positive assessment of the benefits of online lectures when comparing online and offline lectures. In particular, the preference for online lectures in computer-related courses such as CAD was higher than the offline. It was concluded that the Apparel Pattern CAD curriculum based on the K-MOOC platform was effective and satisfactory for learners in various aspects.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.156-163
• /
• 2014

Diesel engine is most suitable one for biodiesel fuel because the compression-ignition diesel engine has desirable fuel consumption due to higher thermal efficiency and in addition, the improvement of the fuel consumption also leads to a reduction of $CO_2$ emission and then it does not need to have spark-ignition system, which means that there is less charge on the technic and complexity. In this study, the spray behavior characteristics of the vegetable palm oil were analyzed by using a common-rail injection system of commercial diesel engine and the results were compared with those obtained for the diesel fuel. The injection pressures and blend ratios of palm oil and diesel(BD3, BD5, BD20, BD30, BD50, and BD100) were the main parameters. The experiments were conducted for different injection pressures: 500bar, 1000bar, 1500bar, and 1600bar by setting injection duration to $500{\mu}s$. Consequently, it was found that there is no significant difference in the macro characteristics of the spray behavior(spray penetration and spray angle) in response to change in the blend ratio of palm oil and diesel at a fixed injection pressure. In particular, all experiments showed the spray angle about $12^{\circ}{\sim}13^{\circ}$.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.755-761
• /
• 2006

Recently, there is growing interest in ultraviolet (UV) irradiation as a disinfection technic in drinking water production due to its effectiveness to inactivate microorganisms such as Crytosporidium parvum without forming disinfection byproducts. However, UV disinfection is known for its drawback such as photoreactivation. Despite many works concerning the photoreactivation, most of works were focused on indicator or non pathogenic microorganisms. The objective of this study is to examine the photoreactivation of Pseudomonas aeruginosa which is an opportunistic pathogen as UV radiation by LP and MP UV lamp was applied. The result showed that P. aeruginosa had high photo repair efficiency regardless of the type of UV irradiation. Both of the effective log repair values of LP and MP UV irradiation were found approximately 2.6 log. In addition, photo repaired P. aeruginosa was not significantly different in forming biofilm in comparison with non treated P. aeruginosa.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.289-291
• /
• 2007

The Digital Multimedia Broadcasting(DMB) system is developed to offer high quality audio-visual multimedia contents to the uses by the various portable terminals in the mobile environment. Integrated complex reception platform is required to receive multimedia broadcasting services transmitted from various transmission media. In this paper, we present the design and implementation technic for providing the both of terrestrial and satellite DMB services simultaneously using the same hardware platform. The implemented complex receiving terminal to accommodate these DMB services simultaneously need composed of it RF module. it baseband module, it complex control module and the complex de-multiplexer module. The complex control module is designed using uClinux operating system. The complex de-multiplexer, which perform the functions of the address decoder and each DMB stream de-multiplexer, is implemented. with FPGA device. The implemented platform is tested in a real environment and its performance is satisfied with required performance criteria.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.13-21
• /
• 1995

On mini-bus with diesel engine, at idle rpm for taking measurement to reduce gear rattle noise, was tested by the three clutch disc samples by turns, then measured the fluctuation of revolution of engine & transmission and parallel vibration of differential gear & transmission. By analyzing the measured data, the gear rattle noise, the matching design and tuning technic of transmission are comprehended and established. Conclusions of this test are as follows ; (1) Fluctuation of revolution on transmission is greatly affected by torsion of clutch disc according to fluctuation of engine revolution transmit to transmission through clutch system. Especially, gear rattle noise can be reduced by minimaizing the fluctuation of the revolution of transmission using pre-damper type clutch disc. (2) The reason of gear rattle noise is higher in summer than winter and driving longer period than initial driving is due to affection by drag torque changing. So, it is necessary for manufacturer to choose proper oil to transmission. (3) It can be occurred jumping and crash noise by applying the pre-damper type clutch disc for reducing the gear rattle noise. So, it is necessary to do test with actual vehicle according to test procedure.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.387-391
• /
• 2011

Since MEMS based micro actuators or generating devices have high efficiency per volume, plenty of research are ongoing. Among them, MEMS based millimeter-scale micro gas' turbine is one of the most powerful issue for replacing chemical batteries. However, since limiting of MEMS manufacturing technique, it is very difficult that makes wide turbine bearing area. It causes low DN number, so sufficient bearing force is hard to achieve. Thus, the most important issue on micro gas turbine is proper bearing design which can keep rotor stable during operation. In order to that, micro-scale gas-lubricated bearing is generally used. In this paper, basic feasibility study and design of journal bearing for 10mm diameter micro gas turbine is described Journal bearing is hydrostatic gas-lubricated type. Numerical simulation is performed with ANSYS CFX 11.0 which is commercial numerical tool. Repulsive force when there is radial displacement in bearing and returning time is calculated using steady and unsteady cases. Auto re-meshing technic is used for moving mesh unsteady cases which simulate displacement of axis and its movement. The simulation results are used for further design of micro gas turbine, and experiment will be done later.

• 성인간호학회지
• /
• 제26권1호
• /
• pp.34-45
• /
• 2014

Purpose: The purpose of this study was to investigate the effect of laughter therapy and cognitive reinforcement program on self-efficacy, depression and cognitive functions of the elderly with mild cognitive impairments (MCI). Methods: The study design was a non-equivalent control group pre and posttest design. Thirty-six subjects over the age of 65 with a diagnosis of mild cognitive impairment were assigned either to a treatment or a comparison group. Data were collected from February 7 to March 27, 2012 in the dementia supporting center. An eight week treatment program that included laughter therapy coupled with a cognitive reinforcing program including hand exercise, laughter dance routine, laughter technic and cognitive training for attention, memory, orientation and execution skill. Results: MoCA-K (t=-6.86, p<.001) and Stroop test CW correct (t=-2.54, p=.008), self-efficacy (t=-3.62, p=.001) in the treatment group were significantly higher than those of the comparison group. Reported depression (t=2.29, p=.014), Stroop test CW error (U=53.50, p<.001) in the treatment group was significantly less than the comparison group. Conclusion: In this study, the treatment was effective in improving self-efficacy, cognitive function and reducing depression in the elderly with MCI.

• Journal of Oral Medicine and Pain
• /
• 제17권2호
• /
• pp.119-128
• /
• 1992

In order to evaluate the relationship of age with the developmental stage on mandibular second molars in female, the author examined the radiographs in standard films taken by intraoral paralleling technic and analysed the development of 620 roots of 310 females ranged from 10 to 18 years. The development was divided into 7 stages : Crown complete (Cr.C.), Root lengthed 1/4(R.1/4), Root length 1/2 (R.1/2), Rooth length 3/4 (R.3/4), Rooth length complete (R.C), Apex 1.2 closed (A. 1/2), Apical closure complete (A.C) The obtained results were as follows : 1. The formation of roots in fulllength of mandibular second molars was completed at 14.21-year-age in mesial root and at 14.96-year-age in distal root. 2. The formation of apical foramen of mandibular second molars was completed at 17.11-year-age in mesial root and at 17.53-year-age in distal root. 3. The mesial root of mandibular second molar was generally developed earlier than distal root (p<0.01) 4. Coefficients of correlation and regression equations between for age(Y) and the developmental stage of mandibular second molar(X) were "Y=1.53X+6.54, r=0.91 (p<0.01)" in mesial root and "Y=1.52X+7.11, r=0.92(p<0.01)" in distal root respectively.l root respectively.

• 치과방사선
• /
• 제10권1호
• /
• pp.57-61
• /
• 1980

In dental roentgenograph it is of mutual benefit to the patient and the dentist to use the minimum amount of radiation capable of producing roentgenograms with maximum interprtive informations. Recent increases in the number of diagnostic x-ray examinations made in this country have caused attention to be paid to the quantity of radiation delivered to the population and operator. The purposes of this study was to assess the quality of dental x-ray units, the amount of films, the average processing procedures and the radiation protection methods in korea. The results were as following: 1. Most of radiation generating system were used in low voltage such as 60Kvp, 10㎃. 2. High sensitivity films such as 'D' group of Kodak or Rinn were mainly used and average 14.7 films used per weeks. 3. Some dentists practiced visual processing technic in simple dark room, and others used instant films. 4. 68.26% of patient held the film themselves, but 27.30% were assisted by dentists film holding. 5. In radiation protection method, 7.85% of dentists had protection equipments such as protective barrier, 2.73% wore protective apron, 27.9% made it a rules to avoid beam, and 7.51% used to maintain a distance from the radiation source.