• 복식문화연구
• /
• 제12권5호
• /
• pp.737-742
• /
• 2004

The purpose of this study is restoration for tearing strength of the durable press (DP) finished 100% cotton fabric by enzymatic treatment. Dimethylol Dihydroxy Ethylene Urea (DMDHEU) was used as a DP finish chemical. Enzymes (cellulase, pectinase, protease, lipolase) were selected based on their specific reaction activities. Ideal application of the enzymes for this work was to remove cross-links created by DMDHEU on the surface of the fibers to offer migration property between microstructures of cellulose, yet cross-links that exist inside of the fibers are still remained to impart effect of wrinkle resistance. Physical characteristics (tearing strength, wrinkle recovery, FT-IR) of enzyme treated samples were measured and compared. It was found out that, in case of enzyme treatment, most of enzymes didn't have a great effect on tearing strength, but, in case of Protease, tearing strength increased at DMDHEU 2% treatment. As a result of an experiment on wrinkle recovery of the textiles treated with enzyme making density of DMDHEU different whenever respective experiment was made, it was discovered that density of DMDHEU increased as wrinkle recovery increased and, in the relation to enzyme treatment especially in Lipase enzyme treatment, the lesser density of DMDHEU, the more wrinkle recovery increased.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.31-35
• /
• 1996

Modal fabric was pretreated with sodium hydroxide, sodium persulfate, and their combined mixture by pad-steaming procedure. The tearing strength of the pretreated modal fabric was measured for subsequent microfibrillation. The solubility of modal fiber in sodium hydroxide solution was highest at 10 % concentration of sodium hydroxide. Extended steaming of the modal fabric padded with 6% sodium hydroxide solution did not reduce the tearing strength appreciably. 2% sodium persulfate pretreatment greatly reduced the tearing strength of modal fabric within 7 minutes of steaming time. The pretreatment with combined composition of sodium hydroxide and sodium persulfate brought about stable reduction in tearing strength within 1 minute of steaming time, which would be appricable to the continuous pretreatment of modal fabric for microfibrillation. Microfibrillation behavior of the pretreated modal fabric was tested also.

• Journal of Welding and Joining
• /
• 제3권1호
• /
• pp.3-10
• /
• 1985

Lamellar tearing susceptibility and through-thickness tensile ductility have been investigated in $40kg/mm^2 and 50kg/mm^2$ class tensile strength steel plates in terms of cleanliness of non-metallic inclusion and welding condition. The plate which had 0.01% cleanliness of A-type inclusion (MnS) had 61% of the reduction of area in the through-thickness direction and did not show lamellar tearing. Lamellar tearing susceptibility decreased with increasing the preheat and interpass temperature. The plate which had 0.04% cleanliness of A-type inclusion did not show lamellar tearing under the condition of 75.deg. C of preheat and interpass temperature.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.57-65
• /
• 1987

The purpose of this study was to investigate the optimum treatment [condition for the Durable press finish of viscose rayon fabrics. Three types of commercial N-methylol crosslinking agents were applied to the fabric utilizing the pad-dry-cure technique. Changes in physical properties were evaluated for the various resin and catalyst concentrations. For DMU, the effect of different catalysts, $MgCl_2$ and $NH_4Cl$, were also compared. DMU treated fabrics showed in crease recovery angle, tensile strength and tearing strength but drastic decrease in abrasion resistance. DMDHEU and MDMDHEU treated fabrics were similar in most physical properties. However, DMDHEU treated fabrics were better in crease recovery angle and stiffness, and MDMDHEU treated fabrics were better in tensile strength, tearing strength and abrasion resistance. For a given resin system, crease recovery angle, tensile strength and stiffness increased with a increase in resin concentration. Tearing strength showed very little change, while abrasion resistance was decreased significantly as the crease recovery angle was increased. For the treatment of DMU, $MgCl_2$ catalyst was much better than $NH_4Cl$ in all physical properties. When $NH_4Cl$ catalyst was used, strength reduction and discoloration were observed. As the catalyst concentration increased, crease recovery angle, stiffness were increased. Tensile strength and tearing strength were increcased than control but at high catalyst concentration, the strength were decreased and abrasion resistance was significantly lowered. DMDHEU and MDMDHEU were more sensitive to catalyst concentrations than DMU.

• Fisheries and Aquatic Sciences
• /
• 제5권2호
• /
• pp.136-140
• /
• 2002

Every year fish skin, bone and intestines are discarded as processing waste material. The use of fish processing waste material is more economical and environmental-friendly. The leather-like material was produced using shark intestine. Physical charactistics such as tensile strength, elongation, tongue tearing strength, and bursting strength of the leather-like material were measured, and compared with those of a commercial leather product. The values of tensile strength, elongation, tongue tearing strength, and bursting strength of the leather-like material were $3.3kg/mm^2$, $53\%$, 13.0kg/mm and $18kg/cm^2$, respectively. Elongation $(l09\%)$ of the leather-like material coated with lacquer was higher than that of a commercial leather material, and the other factors were similar. The tensile strength and tongue tearing strength of the leather-like material was higher than those of shoes leather, but bursting strength was lower. These results suggested a potential value to use the leather-like material from shark intestines as a substitute for commercial leathers.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.88-104
• /
• 1999

본 시험은 외발 뜨기 한지와 쌍발 뜨기 한지를 구분하고 각각의 물성 차이 중 특히 4가지 강도에 대해 상대적 우위와 가로 세로 강도의 차이를 파악했다. 그 결과, 섬유 배향성을 특별히 고려하지 않은 외발 뜨기는 쌍발 뜨기와 비교해 가로, 세로 강도 차이가 다소 적다는 것 외에 특별히 뛰어난 점이 없다는 것을 알 수 있었다. 외발 뜨기 한지가 질기다고 느껴지는 것은 좋은 원료와 토착식 제법으로 여러 장(2~8장) 겹쳐서 절대적인 강도를 향상시켰기 때문이며 상대적인 강도인 지수비교에서는 큰 차이가 없었다. 또한 부가적으로 도침의 효과를 파악할 수 있었다. 도침은 내절도를 두드러지게 향상시켰으며 인열지수(인열강도)를 뺀 열단장과 파열지수(파열강도)를 높이는 역학을 했다. 특히 열단장(인장강도)의 향상을 가져왔다. 그리고 토착식 제법의 외발 뜨기는 여러 겹을 겹칠수록 인열지수가 증가(다른 강도에 비교해 상대적인 증가임)하는 경향을 보였다. 그러므로 도침과 토착식 한지는 서로 부족한 강도를 훌륭히 보완하는 역할을 했음을 알 수 있었다. 따라서 섬유 배향성을 고려하여 초지하고 도침을 실시해야 외발 뜨기 고유의 강도적 특징을 살릴 수가 있음을 알 수 있었다. 그리고 오늘날에 토착 외발 뜨기 방식으로 제조된 전통 한지들은 전체적인 강도면에서 토착 한지류와 비슷했으며 2겹지의 경우엔 가로 세로 강도차이도 토착한지 수준이었다. 그러나 강도들간의 우열 특성에서는 인열강도가 특히 낮았던 쌍발 뜨기 한지와 전체적으로 고른 강도를 보인 토착 외발 뜨기 한지의 중간에 위치하여 개선의 여지를 찾을 수 있었다.

• 한국주조공학회지
• /
• 제41권5호
• /
• pp.419-433
• /
• 2021

Al-Si-Cu 합금은 구리 첨가에 따른 석출경화로 경도와 강도가 현저하게 강한 합금을 생성하는 장점이 있습니다. 그러나 구리를 첨가하면 Al-Si-Cu 합금의 응고 범위가 확장되고 합금은 응고 중에 발생하는 가장 흔하고 심각한 파단 현상 중 하나 열간 균열이 발생하기 쉽습니다. 합금의 열간 균열 특성에 대한 기존의 평가 방법은 이 특성에 대한 정량적 데이터를 제공하지 않는 상대적이고 정성적인 분석 방법입니다. 이 연구에서 Al-Si-Cu 주조 합금의 열간 균열 특성에 대한 더 신뢰할 수있는 정량 데이터를 얻기 위해 Instone et. al 이 개발 한 장치를 부분적으로 수정되었습니다. Cu 원소의 영향을 평가하기 위해 Al-Si-Cu 계 합금에서 4 가지 수준의 Cu 함량을 (0.5, 1.0, 3.0, 5.0) wt. %로 설정하고 각 합금에 대해 열간 균열 특성을 평가했습니다. Cu 함량이 증가함에 따라 열간 균열 강도는 (2.26, 1.53, 1.18, 1.04) MPa)로 감소했습니다. 열간 균열이 발생하는 시점, Cu 함량이 증가함에 따라 고액 공존 범위가 증가하여 동일 온도에서 해당 고상율 및 응고 속도가 감소하였다. 파단면의 형태는 수상 돌기에서 잔류 액상으로 덮인 수상 돌기로 바뀌었고, 열간 균열 발생 인근에서 CuAl₂ 상이 관찰되었다.

• 한국주조공학회지
• /
• 제36권2호
• /
• pp.67-74
• /
• 2016

The effects of scrap content on the hot tearing property and tensile property were investigated in AC2BS alloy. The hot tearing strengths were $16.4kgf/cm^2$, $15.2kgf/cm^2$, $14.9kgf/cm^2$ and $13.3kgf/cm^2$, respectively, under the constant solid fraction of 29.3% when the scrap contents of the specimens were 0%, 20%, 35% and 50%. In the same way, tensile strengths of the as-cast condition were $24.5kgf/mm^2$, $23.7kgf/mm^2$, $17.3kgf/mm^2$ and $16.0kgf/mm^2$, respectively, and the corresponding tensile strengths of the T6 heat treatment condition were $27.2kgf/mm^2$, $26.7kgf/mm^2$, $24.2kgf/mm^2$ and $23.9kgf/mm^2$. Hot tearing strength and tensile strength decreased as scrap content of the specimen increased. According to the evaluation of the quantitative hot tearing and tensile test results, the decrease of these strengths is due to the presence of oxide films which act as crack initiation site of the specimens. Therefore, elimination of oxide films of aluminum melt to maintain melt cleanliness is required.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.95-102
• /
• 2000

This paper presents the second part of a study of deinking using wort. Physical properties of deinked pulps such as tensile strength, bursting strength and tearing resistance were investigated. In order to analyze the properties, the fiber length and coarseness of deinked pulp was also measured. Results of deinking experiments showed that the deinking efficiency of enzyme treatments was higher than that of chemical treatments in strength properties such as tensile strength, bursting strength and tearing resistance on the the whole. we think that the reason why is that the fiber length and coarseness of deinked pulp with wort are more increased and decreased than those of deinked pulp with chemicals individually.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.197-204
• /
• 2006

The purpose of this study is to evaluate the AE characteristics for the basemetal, PWHT (post-weld heat treatment) and weldment specimens of SA-516 steel during fracture testing. Four-point bending and AE tests were conducted simultaneously. AE signals were emitted in the process of plastic deformation. AE signal strength and amplitude of the weldment was the strongest, followed by PWHT specimen and basemetal. More AE signals were emitted from the weldment samples because of the oxides, and discontinuous mechanical properties. AE signal strength and amplitude for the basemetal or PWHT specimen decreased remarkably compared to the weldment because of lower strength. Pre-cracked specimens emitted even lower event counts than the corresponding blunt notched specimens. Dimple fracture from void coalescence mechanism is associated with low-level AE signal strength for the basemetal or PWHT. Tearing mode and dimple formation were shown on the fracture surfaces of the weldment, but only a small fraction produced detectable AE.