• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.75-83
• /
• 1995

1, 3-Di(2-dodecanoylaminoethyl)-2, 7-dioxy-1, 3, 6, 8-tetraazacyclodecane[DDTD] and sorbitan monostearate(SMS) were synthesized as a main component for softner. O/W type softner(DSA) was prepared by blending of DSA, SMS, polyoxyethylene(10) castor oil, glyceryl monooleate, and polyoxyethylene(7) stearyl ether. After treatment of DSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DSA was found to be durable softner with good softness.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.65-73
• /
• 1995

1, 3-Di(dodecanoyl)-2, 7-dioxy-6, 8-di(2-hydroxyethyl)-1, 3, 6, 8-tetraazacyclodecane(DDDT) and pentaerythritol monostearate(PMS) were synthesized as a main component for softner. O/W type softner(DPSA) was prepared by blending DDDT and PMS with polyoxyethylene(10) castor oil, polyoxyethylene(20) oleyl ether, and polyoxyethylene(10) monolaurate. After treatment of DPSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DPSA was proved to be durable softner with good softness.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.341-345
• /
• 2003

Organic acid salt of fatty polyamide (DDDT) and acrylate of fatty carbamide (DDTCA) were synthesized as a main component for the softener. O/W type non-ionic softener (NSC) was prepared by blending DDDT and DDTCA with beef tallow, lanolin anhydride. polyoxyethylene(7) stearyl ether, and polyoxyethylene(50) oleyl ether. After treatment of NSC to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, NSC was proved to be durable non-ionic softener with good softness.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.30-35
• /
• 2008

Mechanical properties of paper mulberry bast fiber handsheets were investigated to study the characteristics of bast fiber in terms of being suitable for modern paper making process. Tensile, tear and burst strength of handsheets made from bast fiber of paper mulberry were better than those of NBKP handsheets. Smoothness of bast fiber was higher but stiffness was lower than NBKP. Sizing performance of bast fiber were worse. 3D image analysis showed that handsheets of bast fiber had inferior formation and more pores comparing to NBKP.

• Macromolecular Research
• /
• 제8권6호
• /
• pp.285-291
• /
• 2000

Influence of silane coupling agent, bis-(3-(triethoxisilyl)-propyl)-tetrassulfide, on cure characteristics and bound rubber content of filled styrene-butadiene rubber (SBR) compounds and on physical properties of the vulcanizates was studied. Carbon black-filled and silica-filled compounds were compared. Content of the bound rubber increased with increased content of the silane coupling agent and this trend was shown more clearly in the silica-filled compounds. Optimum cure time of the carbon black-filled compound increased with increase of the silane content, while that of the silica-filled one decreased. Cure rate of the carbon black-filled compound became slower as the silane content increased while that of the silica-filled one became faster. By increasing the silane content, the minimum torque decreased and the delta torque increased. Physical properties of the silica-filled vulcanizate were found to be improved by adding the silane coupling agent. However, for the carbon black-filled vulcanizates, the tensile strength and tear resistance decreased with increase of the silane content. The differences between the carbon black-filled and silica-filled compounds were explained by difference in the reactivities of the fillers with the silane.

• Elastomers and Composites
• /
• 제30권1호
• /
• pp.9-19
• /
• 1995

To make filler loaded conducting rubber which has the excellent electronical and physical properties, CR and NBR were mixed with magnetite$(Fe_3O_4)$. From the result of the study, vulcanization characteristics shows the upgrading curve as increase in filler concentration and CR has more torque than NBR. When elongation be higher, modulus comes to decreases. Tear strength gradually decrease after showing of the maximum point when is in the 100phr in all. Resilience is not good to cause the increase in filler concentration. In the electrical properties, conductivity becomes smaller when filler concentration is increased. The increase of voltage makes an conductivity grown, but the changed rate is weak. The influence of temperature hardly changes on increasing temperature. The morphology and the distribution for a conductivity filler through SEM were better, the more filler concentration increase, the shorter the particle interval is.

• 한국응용과학기술학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 1998

Lubricating softner(SOS-2) for permanent press(PP) finish was prepared by blending water, beef tallow hardened oil for improving softness, and the emulsion which was synthesized from N-hexadecanoyl-N,N'-bis(2-hexadecamidoethyl)amine as a softening component and silicone oil KF-96 as a lubricating component. The prepared SOS-2 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as tear strength, crease recovery, bending resistance test were tested. The samples treated with SOS-2 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin.

• 한국응용과학기술학회지
• /
• 제15권1호
• /
• pp.17-23
• /
• 1998

To prepare a O/W type nonionic durable softner(ANSA), synthesized 1, 3-dihexadanoyl-2, 7-dioxy-6, 8-di(2-hexadecanoyloxyethyl)-1, 3, 6, 8-tetraazacyclodecane as the main component of softner, was blended with beef tallow, anhydrous lanolin, polyoxyethylene(20) oleyl ether, sorbitan sesquioleate, and polyoxyethylene(7) stearyl ether in various compositions. Emulsion stability of ANSA was good, and the mixed HLB value was 9.8. After the treatment of ANSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured, respectively. As a result of the measurement, ANSA was proved to be durable softner with good softness.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.41-47
• /
• 2000

The objective of this study is to assess the possibility of ozone as an environmentally friendly new deinking alternative for conventional deinking method. It is well known that the white ledger is very difficult to deink because the toner ink has the peculiar shape and size. Ozonization could remove the ink particles above 300 microns and thus improved the ink removal efficiency. Ozonization also improved the WRV of recycled fiber and apparent density, scott bond strength , breaking length, double fold and tear index. Thus, we believe that ozonization could be used as a deinking means of white ledger instead of the convention미 deinking method.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.91-96
• /
• 2019

The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).