• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.843-850
• /
• 2016

This paper introduces a novel modulation scheme for vehicular communication in taking advantage of existing LED lights available on a car. Our proposed 2-Phase Shift Keying (2-PSK) is a spatial modulation approach in which a pair of LED light sources in a car (either rear LEDs or front LEDs) is used as a transmitter. A typical camera (i.e. low frame rate at no greater than 30fps) that either a global shutter camera or a rolling shutter camera can be used as a receiver. The modulation scheme is a part of our Image Sensor Communication proposal submitted to IEEE 802.15.7r1 (TG7r1) recently. Also, a neural network approach is applied to improve the performance of LEDs detection and decoding under the noisy situation. Later, some analysis and experiment results are presented to indicate the performance of our system

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.1
• /
• pp.27-34
• /
• 1974

This study is aimed at a validation of the vigilance simulation model which was proposed earlier (2). The model estimates a perceived danger value, an alertness level and the probability of detection at a given elapsed time of vigilance. Twenty-nine male and seven female subjects were given a simple task. They were asked to detect a number(four numbers out of six digits in the telephone directory which have the probability of occurrence in the range of 0.0010-0.0018) in six different experimental conditions, for periods of two to three hours. Analysis of the experiments showed that although the mean detection rate varied slightly in two hours, the within-subject variance and the number of cyclic performance fluctuations increased significantly. A primal factor that affects the performance seems to be the frequency of target occurrence. By curve fitting, the relation between the probability of detection and the percentages of danger event occurrence was derived; $y=0.50(1-{\varepsilon}^{-50x^2})+0.39$. Assuming the equation represents the normal detection rate(100% performance), the Relative Vigilance Performance Rating was calculated. This rating method could be a useful criterion in selecting and training of the vigilance personnel. The results show that the simulation model is a good estimator of human a performance when the probability of danger occurrence is greater than 0.0015; it gives a good reference for improving the vigilance system. Suggestions are made that (1) the validity of proposed functional equations over the extended range of danger probability be studied, (2) an analysis of the cyclic fluctuations of the alertness level be accomplished, and (3) the cost functions of detection reliability be included in any future model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.894-902
• /
• 2003

Prebiotics (peptides, N-acetyglucoamine, fructo-oligosaccharides, isomalto-oligosaccharides and galactooligosaccharides) were added to skim milk in order to improve the growth rate of contained Lactobacillus acidophilus, Lactobacillus casei, Bifidobacterium longum and Bifidobacterium bifidum. The purpose of this research was to study the potential synergy between probiotics and prebiotics when present in milk, and to apply modern optimization techniques to obtain optimal design and performance for the growth rate of the probiotics using a response surface-modeling technique. To carry out response surface modeling, the regression method was performed on experimental results to build mathematical models. The models were then formulated as an objective function in an optimization problem that was consequently optimized using a genetic algorithm and sequential quadratic programming approach to obtain the maximum growth rate of the probiotics. The results showed that the quadratic models appeared to have the most accurate response surface fit. Both SQP and GA were able to identify the optimal combination of prebiotics to stimulate the growth of probiotics in milk. Comparing both methods, SQP appeared to be more efficient than GA at such a task.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.4
• /
• pp.47-53
• /
• 2005

This study aim to investigate the effects of supply of oxygen enhances cerebral activation through increased activation in the brain and using a 3 Tesla fMRI system. Five volunteers (right handed, average age of 21.3) were selected as subjects for this study. Oxygen supply equipment that provides 30% oxygen at a constant rate of 15L/min was given using face mask. A 3 Tesla fMRI system using the EPI BOLD technique, and three-pulse sequence technique get of the true axial planes scanned brain images. The author can get the perfusion images of the brain by oxygen inhalation with susceptibility contrast EPI sequence at the volunteers. Complex movement consisted of a finger task in which subjects flexed and extended all fingers repeatedly in union, without the fingers touching each other. Both task consisted of 96 phases including 6 activations and rests contents. Post-processing was done on MRDx software program by using cross-correlation method. The result shows that there was an improvement in performance and also increased activation in several areas in the oxygen method. These finding demonstrates that while performing cognitive tasks, oxygen administration was due to increase of cerebral activation.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.172-178
• /
• 2021

Purpose: This study aimed to develop a deep learning architecture combining two task models to generate synthetic computed tomography (sCT) images from low-tesla magnetic resonance (MR) images to improve metallic marker visibility. Methods: Twenty-three patients with cervical cancer treated with intracavitary radiotherapy (ICR) were retrospectively enrolled, and images were acquired using both a computed tomography (CT) scanner and a low-tesla MR machine. The CT images were aligned to the corresponding MR images using a deformable registration, and the metallic dummy source markers were delineated using threshold-based segmentation followed by manual modification. The deformed CT (dCT), MR, and segmentation mask pairs were used for training and testing. The sCT generation model has a cascaded three-dimensional (3D) U-Net-based architecture that converts MR images to CT images and segments the metallic marker. The performance of the model was evaluated with intensity-based comparison metrics. Results: The proposed model with segmentation loss outperformed the 3D U-Net in terms of errors between the sCT and dCT. The structural similarity score difference was not significant. Conclusions: Our study shows the two-task-based deep learning models for generating the sCT images using low-tesla MR images for 3D ICR. This approach will be useful to the MR-only workflow in high-dose-rate brachytherapy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.322-327
• /
• 2010

It is a critical task to keep the ventilation system working in a proper and efficient manner in large multi-storey buildings, and the enthalpy exchanger is becoming an increasingly important part of the ventilation system by playing the function of channeling heat and moisture. We present a computational study on the heat transfer performance of the cross-flow enthalpy exchanger, which is in large use for residential buildings. The ducts are considered whose cross-sectional shapes resemble triangle and longitudinal centerline a cosine wave. It is shown that, as the cross-sectional shape departs from triangle, the heat transfer performance of the duct tends to deteriorate. Also, applying the wave-like shape to the longitudinal centerline of the duct increases the rate of heat transfer and the applied pressure-gradient at the same time. The origin of the performance variations in the cases considered are quantitatively analyzed and discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.2977-2997
• /
• 2018

In big data era, fresh data grows rapidly every day. More than 30,000 gigabytes of data are created every second and the rate is accelerating. Many organizations rely heavily on real time streaming, while big data stream computing helps them spot opportunities and risks from real time big data. Storm, one of the most common online stream computing platforms, has been used for big data stream computing, with response time ranging from milliseconds to sub-seconds. The performance of Storm plays a crucial role in different application scenarios, however, few studies were conducted to evaluate the performance of Storm. In this paper, we investigate the performance of Storm under different application scenarios. Our experimental results show that throughput and latency of Storm are greatly affected by the number of instances of each vertex in task topology, and the number of available resources in data center. The fault-tolerant mechanism of Storm works well in most big data stream computing environments. As a result, it is suggested that a dynamic topology, an elastic scheduling framework, and a memory based fault-tolerant mechanism are necessary for providing high throughput and low latency services on Storm platform.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.9
• /
• pp.263-272
• /
• 2023

Industrial Internet of Things (IIoT) is an important factor in increasing production efficiency in industrial sectors, along with data collection, exchange and analysis through large-scale connectivity. However, as traffic increases explosively due to the recent spread of IIoT, an allocation method that can efficiently process traffic is required. In this thesis, I propose a two-stage task offloading decision method to increase successful task throughput in an IIoT environment. In addition, I consider a hybrid offloading system that can offload compute-intensive tasks to a mobile edge computing server via a cellular link or to a nearby IIoT device via a Device to Device (D2D) link. The first stage is to design an incentive mechanism to prevent devices participating in task offloading from acting selfishly and giving difficulties in improving task throughput. Among the mechanism design, McAfee's mechanism is used to control the selfish behavior of the devices that process the task and to increase the overall system throughput. After that, in stage 2, I propose a multi-armed bandit (MAB)-based task offloading decision method in a non-stationary environment by considering the irregular movement of the IIoT device. Experimental results show that the proposed method can obtain better performance in terms of overall system throughput, communication failure rate and regret compared to other existing methods.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.7
• /
• pp.205-216
• /
• 2022

One of the many tools used for distributed deep learning training is Kubeflow, which runs on Kubernetes, a container orchestration tool. TensorFlow jobs can be managed using the existing operator provided by Kubeflow. However, when considering the distributed deep learning training jobs based on the parameter server architecture, the scheduling policy used by the existing operator does not consider the task affinity of the distributed training job and does not provide the ability to dynamically allocate or release resources. This can lead to long job completion time and low resource utilization rate. Therefore, in this paper we proposes a new operator that efficiently schedules distributed deep learning training jobs to minimize the job completion time and increase resource utilization rate. We implemented the new operator by modifying the existing operator and conducted experiments to evaluate its performance. The experiment results showed that our scheduling policy improved the average job completion time reduction rate of up to 84% and average CPU utilization increase rate of up to 92%.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2
• /
• pp.88-95
• /
• 2006

In this Paper. a method for improving the performance of automatic speech recognition (ASR) system for conversational speech is proposed. which mainly focuses on increasing the robustness against the rapidly speaking utterances. The proposed method doesn't require an additional speech recognition task to represent speaking rate quantitatively. Energy distribution for special bands is employed to detect the vowel regions, the number of vowels Per unit second is then computed as speaking rate. To improve the Performance for fast speech. in the pervious methods. a sequence of the feature vectors is expanded by a given scaling factor, which is computed by a ratio between the standard phoneme duration and the measured one. However, in the method proposed herein. utterances are classified by their speaking rates. and the scaling factor is determined individually for each class. In this procedure, a maximum likelihood criterion is employed. By the results from the ASR experiments devised for the 10-digits mobile phone number. it is confirmed that the overall error rate was reduced by $17.8\%$ when the proposed method is employed