• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.97-103
• /
• 2004

This paper presents a general overview of the Korean stick-held dip net fishery for Pacific saury operated in the North Pacific Ocean since 1985. Annual catches, annual centroids distribution of fishing ground, and optimum fishing temperatures were compared between the periods before and after the new Korea-Japan bilateral fishery arrangement established in 1998. Fishing usually began in May and ended by December, during which major catches were taken in the months September~November before the bilateral fishery arrangement between Korea and Japan, whereas in August~October after the arrangement. It was observed that after the arrangement the centroids of fishing ground was shifted from the usual fishing area off the east coast of Japan to the east of South Kuril Islands, 45$^{\circ}$N and 151$^{\circ}$E. Optimum fishing temperatures appeared to be different by month ; 12.5~14.4$^{\circ}C$ in May, 12.0~14.2$^{\circ}C$ in June, 11.4~13.9$^{\circ}C$ in July, 11.4~15.9$^{\circ}C$ in August, 12.9~16.9$^{\circ}C$ in September, 12.7~17.3$^{\circ}C$ in October, 13.1~17.6$^{\circ}C$ in November, and 15.0~19.1$^{\circ}C$ in December. A total of 13 species were caught during scientific observation periods but the target species, Pacific saury, accounted for about 99.9% of the total catch. Although there was no difference in fishing days between those vessels equipped with the sonar and those without sonar, number of set, total catch, and CPUE of those with sonar were higher than those without sonar by 13%, 26%, and 12%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.161-183
• /
• 2011

This study aims to design, develop the impact of a high school course in practical problem- focused teaching plan which will enable students to deal with an aging society, and prepare well for the aging by looking at issues the elderly face. This study set a target of analyzing the 2007 revised curriculum manual to develop instructor-led teaching and learning plans for 'Successful aging preparation'. Five common subjects were reframed on a practical problem basis through factor analysis of preliminary research regarding aging education for teenagers and the 2007 revised curriculum and textbooks of Technology Home Economics, and Human Development. The practical problem was 'What do we need to do to Successfully live an independent life in aging?', and the subjects studied to answer this question were the aging society and population changes. the nature of the elderly, aging preparation, care of the elderly, and welfare services for the elderly. These five subjects were grouped under the main categories of The Aging Society. Understanding the Elderly, and aging Preparation. The ultimate objective of the lessons was, through critical reasoning, to inquire into the causes of current problems the elderly face so that teenagers can understand aging societies and the elderly, and prepare for a Successful aging. Another objective was to seek reasonable alternatives for teenagers as they prepare for Successful and independent aging, and increase their problem-solving abilities in choosing the best course of action by considering the ripple effect of consequences of each of those alternatives. The practical problem-teaching lesson plans consisted of five classes on practical reasoning instruction. This study suggests that new high school curricula should include lessons on preparation for aging so that students can deal successfully with our aging society.

• Journal of Intelligence and Information Systems
• /
• v.17 no.1
• /
• pp.91-110
• /
• 2011

This paper analyzes the cases where the hotels have increased their services and enhanced their work process through IT solutions to cope with computerization globalization. Also the cases have been studies where national hotels use the CRM solution internally to respond effectively to customers requests, increase customer analysis, and build marketing strategies. In particular, this study discusses the introduction of the CRM solutions and CRM sales business and marketing services using a process for utilizing the presumed, CRM by introducing effective DEA(Data Envelopment Analysis). First, the comparison has done regarding the relative efficiency of L Company with the CCR model, then compared L Company's restaurants and facilities' effectiveness through BCC model. L Company reached a conclusion that it is important to precisely create and manage sales data which are the preliminary data for CRM, and for that reason it made it possible to save sales data generated by POS system on each sales performance database. In order to do that, it newly established Oracle POS system and LORIS POS system concerned with restaurants for food and beverage as well as rooms, and made it possible to stably generate and manage sales data and manage. Moreover, it set up a composite database to control comprehensively the results of work processes during a specific period by collecting customer registration information and made it possible to systematically control the information on sales performances. By establishing a system which unifies database and managing it comprehensively, impeccability of data has been greatly enhanced and a problem which generated asymmetric data could be thoroughly solved. Using data accumulated on the comprehensive database, sales data can be analyzed, categorized, classified through data mining engine imbedded in Polaris CRM and the results can be organized on data mart to provide them in the form of CRM application data. By transforming original sales data into forms which are easy to handle and saving them on data mart separately, it enabled acquiring well-organized data with ease when engaging in various marketing operations, holding a morning meeting and working on decision-making. By using summarized data at data mart, it was possible to process marketing operations such as telemarketing, direct mailing, internet marketing service and service product developments for perceived customers; moreover, information on customer perceptions which is one of CRM's end-products could feed back into the comprehensive database. This research was undertaken to find out how effectively CRM has been employed by comparing and analyzing the management performance of each enterprise site and store after introducing CRM to Hotel enterprises using DEA technique. According to the research results, efficiency evaluation for each site was calculated through input and output factors to find out comparative CRM system usage efficiency of L's Company four sites; moreover, with regard to stores, the sizes of workforce and budget application show a huge difference and so does the each store efficiency. Furthermore, by using the DEA technique, it could assess which sites have comparatively high efficiency and which don't by comparing and evaluating hotel enterprises IT project outcomes such as CRM introduction using the CCR model for each site of the related enterprises. By using the BCC model, it could comparatively evaluate the outcome of CRM usage at each store of A site, which is representative of L Company, and as a result, it could figure out which stores maintain high efficiency in using CRM and which don't. It analyzed the cases of CRM introduction at L Company, which is a hotel enterprise, and precisely evaluated them through DEA. L Company analyzed the customer analysis system by introducing CRM and achieved to provide customers identified through client analysis data with one to one tailored services. Moreover, it could come up with a plan to differentiate the service for customers who revisit by assessing customer discernment rate. As tasks to be solved in the future, it is required to do research on the process analysis which can lead to a specific outcome such as increased sales volumes by carrying on test marketing, target marketing using CRM. Furthermore, it is also necessary to do research on efficiency evaluation in accordance with linkages between other IT solutions such as ERP and CRM system.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.159-164
• /
• 2014

The objective of this study was to establish an open-field experimental warming treatment and precipitation manipulation system to simulate climate change impact for Pinus densiflora seedlings based on a climate change scenario in Korea. Two-year-old seedlings were planted in a nursery in April, 2013. The air temperature of warmed plots (W) was set to increase by $3.0^{\circ}C$ compared to control plots (C) using infrared lamps from May, 2013. The three precipitation manipulation consisted of precipitation decrease using transparent panel (-30%; $P^-$), precipitation increase using pump and drip-irrigation (+30%; $P^+$) and precipitation control (0%; $P^0$). Initially, the air temperature was $2.2^{\circ}C$ higher in warmed plots than in control plots and later air temperature was maintained close to the target temperature of $3.0^{\circ}C$. The average soil temperature was $3.1^{\circ}C$ higher in warmed plots than in control plots. Also the average soil moisture content after the precipitation manipulation increased by 13.9% in $P^+W$ and decreased by 10.0% in $P^-W$ compared to $P^0W$, and increased by 23.7% in $P^+C$ and decreased by 7.6% in $P^-C$ compared to $P^0C$. It was confirmed that the open-field experimental warming and precipitation manipulation system was properly designed and operating.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.122-125
• /
• 2004

In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration gating techniques that can adjust patients' beds by using reversed values of the data obtained. The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range 3 cm ${\sim}$3 m), host computer (RS232C) and stepping motor (torque 2.3Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place in order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data(three dimensional data form with distance of 2cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. The result of analyzing the acquisition-correction delay time for the three types of data values and about each value separately shows that the data values coincided with one another within 1% and that the acquisition-correction delay time was obtained real-time (2.34 ${\times}$ 10$^{-4}$sec). This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultra sonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.17-23
• /
• 2008

Purpose: Cone-beam CT using linear accelerator attached to on-board imager is a image guided therapy equipment. Because it is to check the patient's set-up error, correction, organ and target movement. but imaging dose should be cause of the secondary cancer when taking a image. The aim of this study is investigation of appropriate cone beam CT scan mode to compare and estimate the image quality and skin dose. Materials and Methods: Measurement by Thermoluminescence dosimeter (TLD-100, Harshaw) with using the Rando phantom are placed on each eight sites in seperately H&N, thoracic, abdominal section. each 4 methods of scan modes of are measured the for skin dose in three time. Subsequently, obtained average value. Following image quality QA protocol of equipment manufacturers using the catphan 504 phantom, image quality of each scan mode is compared and analyzed. Results: The results of the measured skin dose are described in here. The skin dose of Head & Neck are measured mode A: 8.96 cGy, mode B: 4.59 cGy, mode C: 3.46 cGy mode D: 1.76 cGy and thoracic mode A: 9.42 cGy, mode B: 4.58 cGy, mode C: 3.65 cGy, mode D: 1.85 cGy, and abdominal mode A: 9.97 cGy, mode B: 5.12 cGy, mode C: 4.03 cGy, mode D: 2.21 cGy. Approximately, dose of mode B are reduced 50%, mode C are reduced 60%, mode D are reduced 80% a point of reference dose of mode A. the results of analyzed HU reproducibility, low contrast resolution, spatial resolution (high contrast resolution), HU uniformity in evaluation item of image quality are within the tolerance value by recommended equipment manufacturer in all scan mode. Conclusion: Maintaining the image quality as well as reducing the image dose are very important in cone beam CT. In the result of this study, we are considered when to take mode A when interested in soft tissue. And we are considered to take mode D when interested in bone scan and we are considered to take mode B, C when standard scan. Increasing secondary cancer risk due to cone beam CT scan should be reduced by low mAs technique.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.633-640
• /
• 2011

Brassica rapa is an A genome model species for Brassica crop genetics, genomics, and breeding. With the completion of sequencing the B. rapa genome, functional analysis of the genome is forthcoming issue. The expressed sequence tags are fundamental resources supporting annotation and functional analysis of the genome including identification of tissue-specific genes and promoters. As of July 2011, 147,217 ESTs from 39 cDNA libraries of B. rapa are reported in the public database. However, little information can be retrieved from the sequences due to lack of organized databases. To leverage the sequence information and to maximize the use of publicly-available EST collections, the Brassica rapa tissue-specific EST database (BrTED) is developed. BrTED includes sequence information of 23,962 unigenes assembled by StackPack program. The unigene set is used as a query unit for various analyses such as BLAST against TAIR gene model, functional annotation using MIPS and UniProt, gene ontology analysis, and prediction of tissue-specific unigene sets based on statistics test. The database is composed of two main units, EST sequence processing and information retrieving unit and tissue-specific expression profile analysis unit. Information and data in both units are tightly inter-connected to each other using a web based browsing system. RT-PCR evaluation of 29 selected unigene sets successfully amplified amplicons from the target tissues of B. rapa. BrTED provided here allows the user to identify and analyze the expression of genes of interest and aid efforts to interpret the B. rapa genome through functional genomics. In addition, it can be used as a public resource in providing reference information to study the genus Brassica and other closely related crop crucifer plants.

• Journal of Distribution Science
• /
• v.10 no.1
• /
• pp.5-10
• /
• 2012

Currently, the rewards programs offered by many companies to strengthen customer relationships have been working quite well. In addition, many companies' rewards programs, designed for stabilizing revenue, are recognized to be effective. However, these rewards programs are not significantly differentiated between companies and there are no accurate conclusions currently, which can be made about their effects. Because of this, a company with a customer rewards program may not comprehend the true level of active participation. In this environment some companies' rewards programs inadvertently hinder business profitability as a side effect while attempting to increase customer loyalty. In fact, airline and oil companies pass on the financial cost of their programs to the customer, and as a result, they have been criticized publicly. The result of this is that the corporations with bad rewards programs tend to get a bad image. In this study of stores' rewards programs, we centered our focus on the design of the program. The main problem in this study is to recognize the financial value of the rewards program and whether it can create a competitive edge for the companies despite the cost issues experienced by them. Customers receiving financial rewards for their business may be just as satisfied with a particular company or store versus those who are not, and the program, perhaps, does not form a distinctive competitive advantage. When the customer is deciding between competing companies to secure their product needs with, we wanted to figure out how much of an affect a valuable reward program had on their decision making. To evaluate this, we set the first hypothesis as, "based on the level of involvement of the customers, there is a difference between customers' preferences for rewards programs." In the results of Experiment 1 we saw that in a financial compensation program for high-involvement groups and low-involvement groups, significant differences appeared and Hypothesis 1 was partially supported. As for the second hypothesis that "customers will have different preferences between a financial rewards programs (SE) and a joint rewards programs (JE)," the analysis showed that the preference for JE was significantly higher than that for other programs. In addition, through Experiment 2, we were able to find meaningful results, which revealed that consumers have shown a significant difference in their preferences between SE and JE. The purpose of these experiments was to enable the designing of a rewards program by learning how to enhance service information distribution and strengthen customer relationships. From the results, there should be a great amount of value for future service-related endeavors and academic research programs. The research is significant, because the results can be found to have a positive effect on reward program designs however, it does have the following limitations. First, this study was performed using an experiment, and all experiments have limitations. Second, although there was an individual evaluation and a joint evaluation, setting a proper evaluation criteria was difficult. In this study, 1,000 Korean won (KRW) in the individual evaluation had a value of 2 points, and, in the joint evaluation, 1,000 KRW had a value of 1 point. There may have been alternative ways to differentiate the evaluations to obtain the proper results. In this study, since there was no funding, the experiments were performed orally however, this was complementary to the study. Third, the subjects who participated in this experiment were students. Conducting this study through experimentation was unavoidable for us, and future research should be conducted using an actual program with the target customers.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2005

The Korean VLBI Network (KVN) will open a new field of research in astronomy, geodesy and earth science using the newest three Elm radio telescopes. This will expand our ability to look at the Universe in the millimeter regime. Imaging capability of radio interferometry is highly dependent upon the antenna configuration, source size, declination and the shape of target. In this paper, imaging simulations are carried out with the KVN system configuration. Five test images were used which were a point source, multi-point sources, a uniform sphere with two different sizes compared to the synthesis beam of the KVN and a Very Large Array (VLA) image of Cygnus A. The declination for the full time simulation was set as +60 degrees and the observation time range was -6 to +6 hours around transit. Simulations have been done at 22GHz, one of the KVN observation frequency. All these simulations and data reductions have been run with the Astronomical Image Processing System (AIPS) software package. As the KVN array has a resolution of about 6 mas (milli arcsecond) at 220Hz, in case of model source being approximately the beam size or smaller, the ratio of peak intensity over RMS shows about 10000:1 and 5000:1. The other case in which model source is larger than the beam size, this ratio shows very low range of about 115:1 and 34:1. This is due to the lack of short baselines and the small number of antenna. We compare the coordinates of the model images with those of the cleaned images. The result shows mostly perfect correspondence except in the case of the 12mas uniform sphere. Therefore, the main astronomical targets for the KVN will be the compact sources and the KVN will have an excellent performance in the astrometry for these sources.