• Korean Journal of Community Nutrition
• /
• v.14 no.1
• /
• pp.114-122
• /
• 2009

The purpose of this study was to identify the factors of university residence hall foodservice quality which has correlations with subjective QOL (quality of life) of target customers. A total of 176 questionnaires from students of 4 universities in Daegu, Gyeongbuk area were used for the analysis. The male students using residence hall foodservices were highly satisfied with 'clean appearances of employees' ($4.86{\pm}1.25$) and 'clean facilities' ($4.79{\pm}1.26$), while the degree of satisfaction with 'convenient facilities' ($4.50{\pm}1.20$) showed the highest score with female students. Ranking analysis using Spearman's ${\rho}$ revealed that there were significant correlations between students' satisfactions with the dimensions of 'foods and kindness of employees', 'hygiene', 'nutrition', and 'convenience' and their QOL, even though physical QOL of female students showed no significant correlation with satisfaction towards residence hall foodservices. As a conclusion, there should be efforts to improve the QOL of target customers through foodservice quality management.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.449-458
• /
• 2010

The e-Learning quality assurance is a part of responsibility for education in latest information age, and should be understood as a basic direction for qualitative enhancement rather than quantifiable expansion. In such a context, this study sought to survey latest trends of e-Learning quality assurance activities deployed around overseas countries, so that it could give possible implications on how to plan and perform e-Learning quality assurance in Korea. So, this study focused on surveying actual conditions, coverage, target and useful indices of e-Learning quality assurance activities deployed by 9 institutions across 5 countries, and characterizing those activities across 5 countries. As a result, this study could find out its implications such as acquisition of various resources available for e-Learning, nationwide consolidation of e-Learning quality assurance activities, development of specialists in e-Learning quality assurance, and choice and focus for e-Learning quality assurance system. In other words, it was found that e-Learning quality assurance should be approached from nationwide standpoint in the interest of better educational quality, rather than from viewpoint of task.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.10
• /
• pp.581-590
• /
• 2017

For effective improvement of water quality in Seokmun reservoir, this study implemented various analyses including the tributary water quality and flowrate monitoring, contamination of sediment, investigation of pollution source, selection of priority management target tributary by stream grouping method. The COD concentration of the majority of tributaries in Seokmun reservoir watershed was relatively higher than BOD concentration. The concentration of water pollutants regardless of water quality parameters in Yeokcheon, Dangjincheon, Sigokcheon, Baekseokcheon, small stream in Jinkwanri and Janghangri were higher than the other tributaries. The pollution sources in the Seokmun reservoir watershed were mostly distributed in the population, livestock, and industry. The pollutants, which located in Yeokcheon, Dangjincheon, Baekseokcheon, and small stream in Janghangri selected as priority management target tributary, should be preferentially reduced for improving the water quality in Seokmun reservoir. As the evaluation results of water quality in Seokmun reservoir for the effect of water quality improvement according to various scenarios using water quality model, it was found that the water quality in Seokmun reservoir due to the construction of a wastewater treatment plant for management of pollutants in the watershed would be satisfied the class V of water environment standard in reservoir.

• Progress in Medical Physics
• /
• v.28 no.4
• /
• pp.164-170
• /
• 2017

One of the methods to consider the effect of respiratory motion of a tumor target in radiotherapy is to establish a treatment plan with the internal target volume (ITV) created based on an accurate analysis of the target motion displacement. When this method is applied to intensity modulated radiotherapy (IMRT), it is expected to yield a different treatment dose distribution under the motion condition according to the IMRT method. In this study, we prepared ITV-based IMRT plans with conventional IMRT using fixed gantry angle beams, RapidArc using volumetric modulated arc therapy, and tomotherapy using helical therapy. Then, the variation in dose distribution caused by the target motion was analyzed by the dose measurement in the actual motion condition. A delivery quality assurance plan was prepared for the established IMRT plan and the dose distribution in the actual motion condition was measured and analyzed using a two-dimensional diode detector placed on a moving phantom capable of simulating breathing movements. The dose measurement was performed considering only a uniform target shape and motion in the superior-inferior (SI) direction. In this condition, it was confirmed that the error of the dose distribution due to the target motion is minimum in tomotherapy. This is thought to be due to the characteristic of tomotherapy that treats the target sequentially by dividing it into several slices. When the target shape is uniform and the main target motion direction is SI, it is considered that tomotherapy for the ITV-based IMRT method has a characteristic which can reduce the dose difference compared with the plan dose under the target motion condition.

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.117-127
• /
• 2010

The purpose of this study is to analyze the temporal and spatial characteristics of water quality data of Nakdonggang watershed which is second largest watershed in South Korea. The correlation between the water quality items for rainy and non-rainy seasons were also analyzed for two TMDL sites which are Gumi and Namji. BOD data of two Total Maximum Daily Loads (TMDL) target sites were compared with TMDL criteria, 3-year arithmetic mean BOD concentration of the target sites should not exceed the target concentration for 2 consecutive years, to figure out current water quality status. Spatial analysis results showed that the correlation coefficient between Goryeong and Hyunpung was highest with the value of 0.978 followed by Hapcheon and Namji with the value of 0.874. The observed BOD data of Gumi station fluctuated around the TMDL criterion, 1.8mg/L while Namji station mostly exceed the criterion, 2.6mg/L. The criteria values for each target sites are defined by Ministry of Environment. The major factor of correlation coefficient was the distance between the stations. The correlation between the water quality items for non-rainy season showed no relation while the correlation between COD and SS was high followed by COD and TP for Gumi and Namji.

• Journal of Korean Society for Quality Management
• /
• v.12 no.2
• /
• pp.6-10
• /
• 1984

A model for obtaining optimal resetting period and optimal target value of the process quality level is proposed when the quality characteristic is subject to a linear shift in mean. Different sales conditions are considered where good items can he sold at a regular price and bad items at a discounted one. Some numerical examples are also given.

• Journal of Korean Society for Quality Management
• /
• v.26 no.3
• /
• pp.46-59
• /
• 1998

The problem of selecting optimal target values for the mean of the quality characteristic of interest for a production process in which an item is sold in one of two market with different profit / cost structures or reworked. Two profit models are constructed which involve four profit / cost components: profit, production, inspection, and rework costs. Assumed that the quality characteristic of interest is normally distributed, methods of finding the most profitable process mean are presented and a numerical example is given.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.116.3-116
• /
• 2001

A diagnosis methodology for thickness quality in hot finishing mill is proposed based on multivariate statistical analysis. The thickness of hot strip is a key quality factor that is measured by x-ray thickness gauge. Currently, the thickness quality is guaranteed by upper and lower limit of thickness deviation from target thickness. But if any over-limit is occurred, there is no in-line method to identify the causes. In this paper, many parameters are extracted from the thickness deviation signal such as mean deviation(top, middle, tail), rms deviation(top, middle, tail) and peak deviation(top, middle, tail) as time domain parameters ...

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.195-201
• /
• 2003

This study investigated the management environment of medium and small business by examining the role of medium and small business in national economics, the change in management condition, and the problems in Qualify and technique. Also we analyzed problems in the past quality control activity of our medium and small business, and examined the driving direction and introduction method of QM. And to understand the effect of manager's concern in quality management to observe the quality system before and after introduction of QM. A target for this investigation is the medium and small business which has introduced QM through ISO 9000.

• Journal of Korean Society for Quality Management
• /
• v.22 no.4
• /
• pp.132-151
• /
• 1994

Quality is a critical competitive factor in today's environment because of the impact of quality on market share, productivity and costs. Especially in Korean companies, the importance of quality is heightened as they are losing price competitiveness compared to the new industrialized countries. The traditional approach to quality improvement has been focused on workers. The primary means to achieving acceptable outgoing quality has been to inspect quality by adding more inspectors and inspection stations. This is an example of quality cost that can be reduced through the preventive actions against bad quality. Quality cost is best viewed as a measure of costs specifically associated with the achievement or nonachievement of product/service quality required by customers. This paper examines the concept of quality cost, provides guidance to implementing a quality cost system, and identifies the limitations of quality cost information. These limitations are the target for future research for an efficient and effective implementation of quality cost system.