• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.99-110
• /
• 2017

레이다를 이용한 다수 표적의 상태 추정을 통해 추적 성능을 향상시키는 문제는 중요하다. 클러터 환경에서 추적 필터를 이용하여 다수 표적 추적 시 트랙과 측정치 간의 결합사건이 발생하며 개수가 증가함에 따라 결합사건은 기하급수적으로 증가한다. 이러한 환경에서 다수 표적 추적 필터 설계 시 고려해야할 문제는 첫째, 신속한 거짓트랙 제거 및 표적트랙 확정을 통하여 오경보율 최소화하고, 이를 통해 FTD(False Track Discrimination) 성능을 높인다. 둘째, 다수의 트랙이 측정치를 공유하는 결합사건 발생시 효율적으로 각각의 측정치를 트랙에 할당함으로써 트랙 유지성능을 향상시키는 것이다. 두 가지 고려사항을 통해 단일 표적 추적 자료결합 기법을 다수 표적 추적 필터로 확장하여 사용하며, 대표적인 알고리듬으로 JIPDAF(Joint Integrated Probabilistic Data Association Filter)와 LM-IPDAF(Linear Multi-target IPDAF)가 있다. 본 논문에서는 측정치 할당 시 생기는 수 많은 가설들에 대한 확률적 평가를 하지 않음으로써 측정치와 트랙의 개수에 따라 비선형으로 연산량이 증가하지 않으며, 클러터밀도 추정을 통해 트랙을 쇄신하는 트랙존재확률 기반의 LM-IPDAF 알고리듬을 소개한다. 그리고 LM-IPDAF의 트랙존재확률 산출 시 필요한 클러터밀도 추정 방법을 개선함으로써 연산량을 효과적으로 감소시킬 수 있는 방법을 제안하고 시뮬레이션을 통해 기존의 알고리듬과 비교, 분석하여 성능을 검증하였다. 그 결과, 위치 RMSE, Confirmed True Track 측면에서는 동일한 성능을 내면서 시뮬레이션 처리 시간을 약 20% 감소시킬 수 있었다.

• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.194-201
• /
• 2013

To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

• 환경영향평가
• /
• 제29권6호
• /
• pp.414-429
• /
• 2020

하천의 관리를 위하여 수질오염총량 및 물환경기본계획을 수립하여 목표수질을 설정하고 있으며 금호강의 경우 T-P는 목표수질을 달성하고 있으나 BOD, COD, TOC의 경우 지난 5년간 물환경기본계획 목표수질을 초과하였다. 이에 금호강을 대상으로 BOD, COD, TOC를 이용하여 유달부하량 및 유달부하밀도, 오염기여율을 분석하고 수질오염총량관리에서 사용하고 있는 1차원 수질모델인 QUAL-MEV를 활용하여 목표수질 만족을 위한 필요유량을 모의하였다. 유달부하량을 분석한 결과 금호C 지점에서 BOD, COD, TOC 모두 9,832.2 kg/day, 20,656.6 kg/day, 15,545.1 kg/day로 가장 높게 나타났으며, 유달부하밀도는 강우기 및 비강우기에 달서천에서 9.47 kg/day/㎢, 37.55 kg/day/㎢, 30.20 kg/day/㎢과 17.19 kg/day/㎢, 47.59 kg/day/㎢, 39.14 kg/day/㎢로 가장 높게 나타났다. 오염기여율은 강우기에 팔거천이 약 25%, 비강우기에 달서천이 모든 항목에서 약 50%로 가장 높게 나타났다. 또한 금호강본류 및 지류 유기물질간의 상관관계 분석을 수행한 결과 비강우기, 강우기 모두 COD-TOC가 0.8 이상으로 BOD-COD, BOD-TOC보다 상관관계가 높게 나타났다. 그리고 금호C 지점에서 수질오염총량 및 물환경기본계획 목표수질을 만족하기 위한 유량을 조사한 결과 2019년 4월(3.46 ㎥/sec)을 기준으로 약 14배, 22배의 추가유량이 필요한 것으로 분석되었다.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.371-383
• /
• 1999

This paper discusses the importance of indoor air quality based on literaure review of domestic and foreign studies. A number of international efforts to propose standards and guidelines for indoor environmental quality are also reviewed. The pattern of major studies on indoor air quality focussed on characterizaton of gaseous pollutants, particulates, and other specific pollutants during the past decades, whereas VOCs, specific carcinogen, and microbiological agents might be good target pollutants to investigate the effects of human health in recent years. Management of indoor air quality requires a different approach than that adopted for outdoor air. Adequate ventilation of the indoor environment is essential, and a balance between energy conservation and the need for good air quality is required. The ways for managing indoor air quality that will be of great importance are discussed a role of control policy for guidance on how to achieve good indoor air quality.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.661-668
• /
• 2022

Various lean design and construction methods such as target value design, pull planning, value stream mapping have successfully transformed the commercial building construction industry into achieving improved productivity, higher design and construction quality, and meeting the target values of construction projects. Considering the significant advantages of lean, the accelerated dissemination and adoption of lean methods and tools for construction is highly desirable. Currently, the lean design and construction body of knowledge is imparted primarily through publications and conferences. However, one of the most effective ways to impart this soft knowledge is through getting students and trainees involved in hands-on participatory games, which can quickly help them truly understand the concept and apply it to real-world problems. The COVID-19 Pandemic has raised an urgent need of developing virtual games that can be played simultaneously from various locations over the Internet, but these virtual games should be as effective as in-person games. This research develops an online 3D simulation game for Target Value Design that is as effective as in-person games or possibly better in terms of knowledge capture and retention and enjoyable environment and experience. The virtual game is tested on volunteers using feedback from pre-and post- simulation surveys to evaluate its efficacy.

• 한국의학물리학회지:의학물리
• /
• 제10권2호
• /
• pp.89-94
• /
• 1999

BRW 정위프레임을 사용하여 정위방사선수술을 시행하기 위해 1) 정위방사선수술용 원형 콜리메이터, 2) 혈관조영술을 통하여 치료 위치 결정을 위한 localizer, 3) 결정된 치료위치를 치료기에서 조준하기 위한 target localizer, 4) 정위방사선수술용 컴퓨터 치료계획 시스템으로 구성되는 정위방사 선수술 시스템을 개발하였다. 본 연구에서 저자들은 자체 개발한 정위방사선수술 시스템의 임상 적용에 앞서, 인체 모형 팬톰 및 QA용 팬톰을 사용하여 일련의 모의 치료를 시행하여 봄으로써 위치 오차의 정도를 평가하고자 하였다. 실험결과 ,1) 기하 팬톰을 이용한 컴퓨터 치료계획 시스템의 위치 확인 정확도는 평균값, Avg.=(equation omitted)이 1.0mm 이었으며, 2) 치료기의 중심점의 기계적 정밀도는 0.6 $\pm$ 0.2 mm, 3) 컴퓨터단층촬영 및 혈관조영술을 이용한 가상 타켓의 위치 계산의 차이는 0.8 mm 크기 차이는 1.5 mm 로 분석되었고, 4)전 치료과정에 대한 위치오차는 0.9$\pm$0.3 mm 로 나타났다. 이들 결과를 종합해 볼 때 , 저자들이 개발한 정위방사선수술 시스템의 기하학적 위치에 대한 정확도는 임상 적용에 적정 범위 안에 포함되는 것으로 확인하였다. 그러나 이러한 정확도의 유지를 위해서는 정기적인 QA가 필수적이라 하겠다.

• 환경위생공학
• /
• 제10권1호
• /
• pp.106-125
• /
• 1995

Recently, in accordance with elevation of life style and economics, the public demand became increasingly concerned about drinking water quality. Without an adequate supply of safe water, healthy and comfortable life could not exist. Therefore, the purpose of this study is to provide the guidelines and the basic informations to enable supply of clean, tasty and healthy drinking water acceptable for various demands. We analyzed the quality of tap water, mineral water, purified tap water using home tap water purifier. And we researched on the sense of the public complaint over the tap water. We proposed several items relating to the comfortableness of water quality and the target value. Also we presented a case of water supply system for purity and the points at problem The items and target value are as follows 1. turbidity : not more than 1 degree 2. dry residue : $30~200{\;}mg/{\ell}$ 3. hardness : $10~100mg/{\ell}$ 4. free carbon dioxide : not more than $20mg/{\ell}$ 5. $KMnO_{4}$ consumption not more than $3mg/{\ell}$ 6. odor threshold not abnormal 7. residual chlorine : not more than $0.4mg/{\ell}$ 8. water temperature' not more than $20^{\circ}C$ 9. manganese : not more than $0.01mg/{\ell}$ 10. iron : not more than $0.02mg/{\ell}$ 11. aluminum : not more than $0.1mg/{\ell}$

• 전자공학회논문지
• /
• 제52권9호
• /
• pp.125-131
• /
• 2015

함정용 전자광학추적장비의 종속추적 표적지향 성능 개선을 위해 칼만 필터를 제안하였다. 전자광학추적장비의 추적기능 수행 시 표적지향 성능 저하의 주요 요인인 전송 지연 및 측정 오차를 칼만 필터를 활용할 경우 최소화할 수 있는 장점이 있다. 칼만 필터를 활용하여 방위각, 고각 방향으로의 표적지향 오차가 감쇄됨을 확인하고 전자광학추적장비에 적용해봄으로써 전자광학장비에서 빈번하게 발생하는 표적 추적 오차 개선 시스템으로 적합성을 제시하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E4호
• /
• pp.157-168
• /
• 2003

This study evaluated the technical feasibility of the application of titanium oxide (TiO$_2$) photocatalysis for the removal of VOCs in low ppb concentrations commonly associated with non -occupational indoor air quality issues. A series of experiments were conducted to evaluate four parameters (relative humidity (RH), hydraulic diameter (HD), photocatalytic oxidation (PCO) reactor material (RM), and inlet port size (IPS) of PCO reactor) for the PCO destruction efficiencies of the selected target VOCs. None of the target VOCs presented significant dependency on the RH, which is inconsistent with a few previous studies. However, it is noted that the three parameters (HD, RM and IPS) should be considered for better VOCs removal efficiencies for the application of TiO$_2$ photocatalytic technology for cleansing non -occupational indoor air. The PCO destruction of VOCs at concentrations associated with non-occupational indoor air quality issues can be up to nearly 100％. The amount of CO generated during PCO would be negligible in comparison to the indoor CO levels. These results can make the PCO reactor an important tool in the effort to improve non-occupational indoor air quality.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.373-382
• /
• 2015

Purpose: In this paper, we developed a reliability index (RI) to efficiently compare reliability of products based on the design, development and production information such as reliability tests, quality, product life-cycle management. RI also can be applied to reliability prediction of a novel product as well as comparison evaluation among existing products. Methods: For evaluating RI, we proposed evaluation process which is composed of five steps. Target modules are selected based on warranty data and correlation analysis. Scores of selected target modules are calculated by scoring function. Finally, weights of RI model are determined by optimization method. Results: This paper presented an empirical analysis based on failure data of mobile devices. In this case study, we demonstrated that there is a direct correlation between evaluated RI and field failure probability of each product. Conclusion: We proposed the index for comprehensive and effective assessment of product reliability level. From the procedure of this study, we expected to be applied for reliability estimation of novel products and deduction of field failure-related factors.