• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.42-48
• /
• 2014

Soot and tar which were derived from combustion or pyrolysis processes in Puverized Coal(PC) furnace or boiler have been significantly dealing in a radiative heat transfer and an additional source of NOx. Furthermore, the increasing for the use of a coal with low caloric value gives rise to a lot of tar-soot yield and LOI in a recycled ash for using cement materials. So, the ash with higher tar-soot yield and LOI can not recycle due to decreased strength of concrete. In this study, tar-soot yields and flame structures were investigated using the LFR for a blending combustion with bituminous coal and sub-bituminous coal. Also, The investigation were conducted as each single coals and blending ratio. The coals are used in a doestic power plant. In the experimental results, sub-bituminous coal with high volatile contents shows longer soot cloud length than bituminous coal, but overall flame length was shorter than bituminous coal. Tar-soot yields of sub-bituminous coal is lower than those of bituminous coal. Combustion characteristics are different between single coal and blended coal. Therefore, finding an optimal coal blending ratio according to coal rank effects on tar-soot yields.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.209-212
• /
• 2012

This study was performed to analyze coal flames and measure tar and soot yields and structures of chars for two coals depending on the volatile content by the LFR(Laminar Flow Reactor) which can be applied to a variety of coal researches. The results show that volatile contents and oxygen concentration have significant influence on length and width of the soot cloud and it also indicate that the length and width of the cloud in condition of combustion decrease than those of pyrolysis atmosphere. Until the sampling height reach at 50 mm, the tar and soot yields of Berau (Sub-bituminous) coal contained relatively lots of volatile matters are less than those of Glencore A.P. (Bituminous) coal. On the other hand, tar and soot yields of Berau coal are higher than those of Glencore A.P. coal by reacted residual volatile matter. In addition, the images of samples obtained from the particle separation system of the sampling probe support for above results with the yields, and the pore development of char surface by devolatilization.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.6
• /
• pp.519-525
• /
• 2009

The catalytic steam reforming of woody biomass tar and soot to convert a synthetic gas containing hydrogen was investigated by using a bench-scale biomass gasification system. One commercial nickel-based catalyst, Katalco 46-6Q, and two different kinds of natural minerals, dolomite and olivine, were tested as a reforming catalyst at various reforming temperatures. The reaction characteristics of woody biomass tar were also investigated by TGA at a variety of heating rates. With all three catalysts conversion efficiency of tar and soot increased at increasing temperature. The reforming of tar and soot in the synthetic gas induce the increase of combustible gases such as $H_2$, CO and $CH_4$ in the product gas. The nickel-based catalyst showed a higher tar and soot conversion efficiency than mineral catalysts under the same temperature conditions.

• Journal of the Korean Society of Combustion
• /
• v.9 no.2
• /
• pp.38-44
• /
• 2004

The evolution of incipient soot particles has been examined by high resolution electron microscopy (HRTEM) and elemental analyzer in ethylene-air inverse diffusion flames. Laser Induced Incandescence(LII) and laser scattering methods were introduced for examining the soot volume fraction and morphological properties in combustion generated soot qualitatively. Soot particles, collected by thermophoretic sampling, were analyzed by using HRTEM to examine the nano structure of precursor particles. HRTEM micrographs apparently reveal a transformation of condensed phase of semitransparent tar-like material into precursor particles with relatively distinct boundary and crystalline which looks like regular layer structures. During this evolution histories, C/H analysis was also performed to estimate the chemical evolution of precursor particles. The changes of C/H ratio of soot particles with respect to residence time can be divided into two parts: one is a very slowly increasing regime where tar-like materials are transformed into precursor particles (inception process) the other is an increasing region with constant rate where surface growth affects the increase of C/H ratio dominantly (surface growth process). These results provide a clear picture of a transition to mature soot from precursor materials.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1172-1177
• /
• 2004

The evolution of incipient soot particles has been examined by high resolution electron microscopy (HRTEM) and elemental analyzer in ethylene-air inverse diffusion flames. Laser Induced Incandescence(LII) and laser scattering methods were introduced for examining the change of soot volume fraction and morphological properties in combustion generated soot qualitatively. Soot particles, collected by thermophoretic sampling were analyzed by using HRTEM to examine the nano structure of precursor particles. HRTEM micrographs apparently reveal a transformation of condensed phase of semitransparent tar-like material into precursor particles with relatively distinct boundary and crystalline which looks like regular layer structures. During this evolution histories C/H analysis was also performed to estimate the chemical evolution of precursor particles. The changes of C/H ratio of soot particles with respect to residence time can be divided into two parts: one is a very slowly increasing regime where tar-like materials are transformed into precursor particles (inception process) the other is an increasing region with constant rate where surface growth affects the increase of C/H ratio dominantly (surface growth region). These results provide a clear picture of a transition to mature soot from precursor materials.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1034-1042
• /
• 2012

This study was performed by using an LFR (laminar flow reactor), which can be used to carry out different types of research on coal. In this study, an LFR was used to analyze coal flames, tar and soot yields, and structures of chars for two coals depending on their volatile content. The results show that the volatile content and oxygen concentration have a significant effect on the length and width of the soot cloud and that the length and width of the cloud under combustion conditions are less than those under a pyrolysis atmosphere. At sampling heights until 50 mm, the tar and soot yields of Berau (sub-bituminous) coal, which contains a large amount of volatile matter, are less than those of Glencore A.P. (bituminous) coal because tar is oxidized by the intrinsic oxygen component of coal and by radicals such as OH-. On the other hand, at sampling heights above 50 mm, the tar and soot yields of Berau coal are higher than those of Glencore A.P. coal by reacted residual volatile matter, tar and light gas in char and flame. With above results, it is confirmed that the volatile matter content and the intrinsic oxygen component in a coal are significant parameters for length and width of the soot cloud and yields of the soot. In addition, the B.E.T. results and the images of samples (SEM) obtained from the particle separation system of the sampling probe support the above results pertaining to the yields; the results also confirm the pore development on the char surface caused by devolatilization.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.636-641
• /
• 2015

Waste energy conversion to SRF (Solid Refuse Fuel) has the effects not alternative fossil fuel usage but also the reduction of greenhouse gas. But the direct burning of the SRF including a plastic waste generates air pollution problem like soot, dioxin, etc. so that an application of pyrolysis and gasification treatment should be needed. The purpose of this study is to supply a basic thermal data of the pyrolysis gasification characteristics in the plastic-rich SRF which are needed for developing the novel pyrolyser or gasifier. To do so, a bench-scale test rig was newly engineered, and then experiments were achieved for the production characteristics of gas, tar, and char. While SRF sample, gasification air ratio, holding time changed as 2 g, 0.691, 32 min respectively, the $H_2$ 1.36%, $CH_4$ 2.18%, CO 1.88%, $Cl_2$ 15.9 ppm, HCl 6.4 ppm were composed. Also light tar benzene $4.03g/m^3$, naphthalene $0.39g/m^3$, anthracene $0.11g/m^3$, pyrene $0.06g/m^3$, gravimetric tar $18g/m^3$, and char 0.29 g was formed.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1065-1073
• /
• 2006

The unturned carbon in fly ash, recently occurred in the coal-fired Yong Hung power station, caused some problems in ash utilization and boiler efficiency. This paper describes the analysis of unburned carbon and six coals, some tests performed at Yong Hung Boiler, and the results of combustion modification for the reduction of unburned carbon in fly ash. From the physical and chemical analysis of unburned carbon in fly ash, most particles were turned out to be hollow cenosphere and agglomerated soot particles. The sooting potential from six coals used in the plant were investigated with CPD(Chemical Percolation Devolatilization) model. The results showed that the higher potential was presented to Peabody, Arthur, Shenhua coals rather than other coals. It was necessary to measure the coal flow rates at each coal feeding pipe for four burner levels since they affect the extent of mixing of soot with oxidant, in turn, the oxidation rate of soot particles. The unbalance in coal flow rate was found in several coal pipes. We successfully reduced unturned carbon in ash by increasing the excess air and changing the SOFA's yaw angle.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.243-246
• /
• 2008

목질계 바이오매스 가스화 발전에 있어서는 가스화 가스중에 함유되어있는 타르를 가능한 한 가연성 가스로 전환하여 냉가스효율을 향상시키는 것 및 잔유하는 타르는 후단기기에 악영향을 초래할 우려가 있기 때문에 타르를 저감 제거하는 것이 바람직하다. 본 연구에서는 공기 수증기를 사용하여 타르개질 프로세스의 개선을 위해서 타르에서 가스성분으로의 전환에 관한 개질 실험을 실시하여 Wood chip 타르의 열분해 개질 생성물 거동에 대하여 검토하였다. Wood chip 열분해로 생성된 타르의 원소분석 및 $^1H$ NMR분석의 결과로 타르를 치환기를 가지지 않는 방향족, alkyl-기를 가지는 방향족, 산소 함유 방향족, 지방족의 4개로 분류하였다. 개질제에 의해 경질 타르, 중질 타르 모두 감소하였다. 개질 공기는 타르를 연소시키지만 그 속도는 가연성 가스와 경합하고 $900^{\circ}C$에서는 타르의 연소는 나타나지 않았다. alkyl-기를 가지는 방향족은 메탄과 치환기를 가지지 않는 방향족으로 전환되고, 치환기를 가지지 않는 방향족은 수소와 soot로 전환되고, 산소 함유 방향족은 일산화탄소와 치환기를 가지지 않는 방향족으로 전환되는 것을 알았다. 또한, 개질제에 의해alkyl-기를 가지는 방향족, 치환기를 가지지 않는 방향족, 산소 함유방향족 모두가 일산화탄소,이산화탄소로 전환되는 것을 알았다.