• Asia pacific journal of information systems
• /
• 제31권1호
• /
• pp.102-120
• /
• 2021

E-learning is a planned effort towards providing interactive and experiential learning having flexibility in terms of time, place, pace, participation and accessibility. Globalization has set the stage for a social transformation of the world economy driven by technological innovation, emphasizing knowledge-based processes. While the tertiary education enrolments in wealthy nations have gone up incrementally, the same cannot be said to be right about developing economies. E-Learning can streamline enrolments to higher education, in developing nations by being a cost-effective and flexible alternative. The objective of this paper is to draw attention to the similarities in the national culture of these two countries and compare students' perception on e-learning in India and Sri Lanka along eight dimensions viz., viability, dependability, flexibility, inclusivity, power, pertinence, challenge and equitability. The results reveal that e-learning is equally popular among students from both countries, and they have a high perception score towards e-learning on each of the measured eight dimensions. Hence results are indicative of an opportunity of tapping the potential of e-learning in reaching out to a broader audience of underprivileged students and onboarding them into the knowledge economy.

• 한국재료학회지
• /
• 제34권4호
• /
• pp.215-222
• /
• 2024

Because collagen is inherently piezoelectric, research is being actively conducted to utilize it to harvest energy. In this study, a collagen solution was prepared using edible low-molecular-weight peptide collagen powder, and collagen films were fabricated using a dip coating method. The collagen films prepared by dip coating showed a smooth surface without defects such as pinholes or cracks. Dehydrothermal treatment of the collagen films was performed to induce a stable molecular structure through cross-linking. The collagen film subjected to dehydrothermal treatment at 110 ℃ for 24 h showed a thickness reduction rate of 19 %. Analysis of the collagen films showed that the crystallinity of the collagen film improved by about 7.9 % after dehydrothermal treatment. A collagen film-based piezoelectric nanogenerator showed output characteristics of approximately 13.7 V and 1.4 ㎂ in a pressure test of 120 N. The generator showed a maximum power density of about 2.91 mW/m² and an output voltage of about 8~19 V during various human body movements such as finger tapping. The collagen film-based piezoelectric generator showed improved output performance with improved crystallinity and piezoelectricity after dehydrothermal treatment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• 디지털융복합연구
• /
• 제12권1호
• /
• pp.281-286
• /
• 2014

본 논문은 인문학적 지식은 학문적 경계를 극복하고 충분히 다양하게 활용될 수 있으며, 다른 분야로의 확장이 가능함을 확인할 수 있는 융합교육을 위한 학습도구로서 애플리케이션 콘텐츠 설계를 제안하였다. 애플리케이션 콘텐츠를 활용한 문학학습은 다음과 같은 융합학습의 효과를 달성할 수 있다. 유비쿼터스[ubiquitous]환경의 스마트 디바이스 기반 앱은 뉴런의 구조와 같은 정보체제 갖추고 있다. 따라서 애플리케이션은 그중 원하는 정보만 선별하여 융합교육을 위한 하나의 학습콘텐츠로 제작이 가능하며, 동시에 보다 풍부하고 확대된 정보체제의 환경을 제공할 수 있다. 이로서 학습자는 보다 심화된 인문학적 지식의 함양을 도모할 수 있음은 물론이거니와 새로운 지식으로 이끌어 낼 수 있는 능력을 이 과정을 통해 키울 수 있다. 마지막으로 앱 콘텐츠 수업을 통해 문학은 문화, 예술 등 다방면에 필요한 새로운 지식을 창출할 수 있는 기반이 될 수 있음을 확인하게 된다. 이로서 융합교육의 최종목표인 학문의 탈경계화를 확인하게 된다.

• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.266-273
• /
• 2016

Optimization of hole-making operations in manufacturing industry plays a vital role. Tool travel and tool switch planning are the two major issues in hole-making operations. Many industrial applications such as moulds, dies, engine block, automotive parts etc. requires machining of large number of holes. Large number of machining operations like drilling, enlargement or tapping/reaming are required to achieve the final size of individual hole, which gives rise to number of possible sequences to complete hole-making operations on the part depending upon the location of hole and tool sequence to be followed. It is necessary to find the optimal sequence of operations which minimizes the total processing cost of hole-making operations. In this work, therefore an attempt is made to reduce the total processing cost of hole-making operations by applying relatively new optimization algorithms known as shuffled frog leaping algorithm and proposed modified shuffled frog leaping algorithm for the determination of optimal sequence of hole-making operations. An industrial application example of ejector plate of injection mould is considered in this work to demonstrate the proposed approach. The obtained results by the shuffled frog leaping algorithm and proposed modified shuffled frog leaping algorithm are compared with each other. It is seen from the obtained results that the results of proposed modified shuffled frog leaping algorithm are superior to those obtained using shuffled frog leaping algorithm.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.337-348
• /
• 2016

An experimental approach is presented for the measurement of wear that is common in the threading of cold-forged steel. In this work, the first objective is to measure wear on various types of roll taps manufactured to tapping holes in microalloyed HR45 steel. Different geometries and levels of wear are tested and measured. Taking their geometry as the critical factor, the types of forming tap with the least wear and the best performance are identified. Abrasive wear was observed on the forming lobes. A higher number of lobes in the chamber zone and around the nominal diameter meant a more uniform load distribution and a more gradual forming process. A second objective is to identify the most accurate data-mining technique for the prediction of form-tap wear. Different data-mining techniques are tested to select the most accurate one: from standard versions such as Multilayer Perceptrons, Support Vector Machines and Regression Trees to the most recent ones such as Rotation Forest ensembles and Iterated Bagging ensembles. The best results were obtained with ensembles of Rotation Forest with unpruned Regression Trees as base regressors that reduced the RMS error of the best-tested baseline technique for the lower length output by 33%, and Additive Regression with unpruned M5P as base regressors that reduced the RMS errors of the linear fit for the upper and total lengths by 25% and 39%, respectively. However, the lower length was statistically more difficult to model in Additive Regression than in Rotation Forest. Rotation Forest with unpruned Regression Trees as base regressors therefore appeared to be the most suitable regressor for the modeling of this industrial problem.

• 대한통합의학회지
• /
• 제3권2호
• /
• pp.63-72
• /
• 2015

Purpose: The purpose of this study was to investigate the foot pressure of subjects with hallux valgus following conservative management. Methods: The subjects (20 females) were divided into 2 groups; Hallux valgus group (10) and Control group (10) who could evaluate questionnaire & weight bearing X-ray. All the participants were evaluated distribution of foot pressure by Zebris FDM-S system with conservative management (taping therapy and hallux valgus device) during single-limb stance. Results: The Hallux valgus group (HVG) was significantly different than Control group (CG) in hallux valgus angle(p<0.05). The Hallux valgus group with Foot Device (HVG-FD), Hallux valgus group with Taping (HVG-Tp) and Hallux valgus group with Foot device and Taping (HVG-FD&Tp) was not significantly different than CG in hallux valgus angle (p<0.05). The HVG was not significantly different than CG in forefoot (p1, p2, p3), significantly different than CG in rearfoot (p7) about foot pressure during single-limb stance (p<0.05). The HVG-FO and HVG-FO and TP was significantly different than HVG in forefoot (p1, p2, p3), on significantly different than HVG in rearfoot (p7) about foot pressure during single-limb stance (p<0.05). There was significantly correlation HVG-FO and HVG-FO & TP in forefoot (p1, p2, p3) was negative correlation (p<0.05) and in rearfoot (p7) was positive correlation (p<0.05). Conclusion: This study showed that hallux valgus were effected hallux valgus angle and foot pressure by various treatment methods during single-limb stance. Further study is needed to measure various age and work with hallux valgus for clinical application.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.379-392
• /
• 2005

Statement of problem. One of the common problems of dental implant prosthesis is the loosening of the screw that connects each component, and this problem is more common in single implant-supported prostheses with external connection, and in molars. Purpose. The purposes of this study were: (1) to compare the initial abutment screw detorque values of the six different implant-abutment interface designs, (2) to compare the detorque values of the six different implant-abutment interface designs after cyclic loading, (3) to compare the detorque values of regular and wide diameter implants and (4) to compare the initial detorque values with the detorque values after cyclic loading. Material and methods. Six different implant-abutment connection systems were used. The cement retained abutment and titanium screw of each system were assembled and tightened to 32Ncm with digital torque gauge. After 10 minutes, initial detorque values were measured. The custom titanium crown were cemented temporarily and a cyclic sine curve load(20 to 320N, 14Hz) was applied. The detorque values were measured after cyclic loading of one million times by loading machine. One-way ANOVA test, scheffe’s test and Mann-Whitney U test were used. Results. The results were as follows : 1. The initial detorque values of six different implant-abutment connections were not significantly different(p>0.05). 2. The detorque values after one million dynamic cyclic loading were significantly different (p<0.05). 3. The SS-II regular and wide implant both recorded the higher detorque values than other groups after cyclic loading(p<0.05). 4. Of the wide implants, the initial detorque values of Avana Self Tapping Implant, MIS and Tapered Screw Vent, and the detorque values of MIS implant after cyclic loading were higher than their regular counterparts(p<0.05). 5. After cyclic loading, SS-II regular and wide implants showed higher detorque values than before(p<0.05).

• Journal of Oral Medicine and Pain
• /
• 제13권1호
• /
• pp.43-52
• /
• 1988

The author studied masticatory muscle activity and bite force in normal persons without Temporomandibular Disorders(TMD) signs and symptoms, The number of subjects was 15, and the age of them was from 22 to 25 years. Electromyography was used to record the muscle activity in tapping and clenching movement with or without occlusal splint. 3 splints were made from 3 different mandibular position, that if, centric occlusion position, Rocabado's mandibular rest position, Dawson's centric relation position. The thickness of splint was 3.0-3.5㎜ at molar region. The muscle examined were Masseter and Anterior Temporalis attached with surface electrodes and the device used to measure the EMG level was Bioelectric processor Model EM2. After recording the EMG, the author measured the bite force level in clenching movement with bite force meter Model MPM-3000 in the dame position used in the EMG experiment. The obtained results were as follow : 1. With occlusal splints insetion, the amount of decreased muscle activity in Anterior Temporalis was more than those in Masseter. 2. In the three maxillomandibular relationships with occlusal splints, Masseter showed slightly increased level of muscle in centric occlusion but Ant. Temporalis showed decreased level of muscle activity reversely in that position. 3. Muscle activities between Rocabado's rest position and Dawson's centric relation position were generally similar whatever the muscles or the movements the author examined. 4. Bite force in clenching movement increased with splints insertion, especially with the splint registered in centric occlusion position.

• 대한정형도수물리치료학회지
• /
• 제18권1호
• /
• pp.31-37
• /
• 2012

Background: The purpose of this study was conducted to investigate the effects of Push-up plus exercise with kinesio taping on the pain and shoulder motor function in patient with shoulder myofacial pain syndrome. Methods: The patients with myofacial pain syndrome were randomly divided 2 groups. kinesio taping group (n=20) was taken physical therapy program and kinesio taping. Push-up plus exercise with taping group (n=22) was taken physical therapy and kinesio taping with Push-up plus exercise. The kinesio taping applied on upper trapezius and levator scapulae. The Push-up plus exercise performed in standing position and qudripad position during 10 seconds on 15 time, 3 set per each positions. We mearsured the pain degree using PPT, VAS, MPSSI and shoulder motor function using CSA before and after experiment. The significant test of PPT, VAS, MPSSI, CSA according to applying the kinesio taping and Push-up plus exercise between groups used ANCOVA. Results: In the result following analysis, there was significance on PPT (F=7.378, p=.016), VAS (F=13.071, p=.031), CSA (F=5.302, p=.026) between kinesio taping group and Push-up plus exercise with tapping group. Then, Push-up plus exercise with kinesio taping group has significance on the PPT, VAS, CSA in patients with myofacial pain syndrome. Conclusions: It may suggest that kinesio taping combined with Push-up plus exercise will be helpful of the pain and shoulder function improvement in the patients with myofacial pain syndrome.