• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-12
• /
• 2003

The purpose of this work is to investigate the effect of premixing condition on the combustion and exhaust emission characteristics in a HCCI diesel engine. To form homogeneous charge before intake manifold, the premixed fuel is injected into premixed tank by GDI injection system and the premixed fuel is ignited by direct injected diesel fuel. But in the case of high intake air temperature, premixed fuel is auto-ignited before diesel combustion and soot emission is increased. In the case of light load condition, the BSFC is improved by intake air heating because increased air temperature promoted the combustion of premixed mixture. NOx and smoke concentration of exhaust emissions are reduced compared to conventional diesel engine. The combustion characteristics of the HCCI diesel engine such as combustion pressure, rate of heat release, and exhaust emission characteristics are discussed.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.495-500
• /
• 1997

For hydrogen management in severe accidents with degraded nuclear core of PWR's, several experiments have been performed in the SNU hydrogen mixing facility. The objectives are understanding the extent of hydrogen mixing and analyzing the effects of factors which dominate uniform or non-uniform mixing at compartments in the containment building. The facility represents on a 1/11th linearly scaled model of the YGN unit 3&4, hydrogen was simulated by helium. Because there are the gaps between safety injection tank and compartment layers in the containment, the test facility was constructed in three dimentinal mode for analyzing of mixture behavior through the gaps. From the experimental results we could conclude that overall hydrogen concentration distributed uniformly in the free volume of the test compartment, but fluctuated in the gaps. This paper is focused on experimental result from several experiment.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2001

A study on the new active type oil-water separation system including the oil-water separation system of magnetic film was carried out. Separation system is composed of several active types of circulating oil separation steps and one magnetic film separation step at final stage. At the magnetic separation step, ferrofluid easily forms a weak magnetic mixture with oil, which is from the water by magnetic field gradient. The vessel has been designed to run at the maximum speed of 25 knots. And two typical forms of SWATH and Catamaran have been studied as a new type of oil recovery vessel.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.135-138
• /
• 2003

The purpose of this study was to design the self-compaction concrete mixture, having not only high strength but also compensation of shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test, hydration heat analysis were performed. As a results, when 35% of limestone Powder, 6% CSA expansive additives are replaced at unit water 175kg/$\textrm{m}^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.85-88
• /
• 2004

The purpose of this study was to design the self-compaction concrete mixture, having not only high strength but also compensation of shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test. hydration heat analysis were performed. As a results, when 35% of limestone Powder, 6% CSA expansive additives are replaced at unit water 175kg/$\textrm{m}^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished.

• 한국패류학회지
• /
• 제30권2호
• /
• pp.127-134
• /
• 2014

Gonad maturation of Manila clam, Ruditapes philippinarum was induced in this study using a recirculation system over 8 weeks in early spring. Clams used in the experiment were collected in $15^{th}$ April 2010 from the west coast of Korea, as the surface water temperature remained $11^{\circ}C$. To induce gametogenesis and subsequent maturation seawater temperature was elevated $1^{\circ}C$ per day over 10 days to reach $20^{\circ}C$. For the experiment, clams were raised in 120 L quadrangle tank maintained with re-circulated seawater system over 57 days. Water quality parameters including the water temperature, salinity dissolved oxygen, ammonium ion and nitrate levels in the tanks were monitored daily. Mixture of concentrated microalgae including Tetraselmis, Isochrysis, Pavlova and Thalassiosira weissflogii was supplied to clams twice a day, and quantity of the daily ration was adjusted as 3% of clam body dry weight. Histology was applied to examine gonad maturation. Daily monitoring of the water quality parameters indicated that the recirculation system supplied suitable environment to Manila clam; the nitrogenous components stayed below toxic levels (< 0.2 mg/L). At the beginning of the study, clams were mostly in early developing stage. As the seawater temperature reached $20^{\circ}C$, 10 days after the experiment, 20% of clams reached late development at 12 days. First ripe clams were observed at 42 days and 40% of clams were in ripe and ready for spawning at the end of study, 57 days after the experiment. In this study, gametogenesis of Manila clam was successfully induced by elevating water temperature and supplying commercially produced microalgae in a recirculation tank system.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1143-1148
• /
• 2010

We investigated the separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp) and phenyl ether (Pe) by liquid membrane permeation (LMP). A batch-stirred tank was used as the permeation unit. An aqueous solution of saponin and n-hexane were used as the liquid membrane and the outer oil phase, respectively. Yield and selectivity of individual NHC was much larger than that of BAC, Bp and Pe. Increasing the initial mass fraction of the saponin to the membrane solution ($C_{sap,0}$) and the initial volume fraction of O/W emulsion to total liquid in a stirred tank (${\phi}_{OW,0}$) resulted in deteriorating the yield of individual NHC, but increasing the stirring speed (N) resulted in improving the yield of each NHC. With increasing $C_{sap,0}$, the selectivity of each NHC based on DMNs increased. Increasing ${\phi}_{OW,0}$ and N resulted in decreasing the selectivity of individual NHC based on DMNs. At an experimental condition fixed, the sequence of the yield and selectivity in reference to DMNs for each NHC was Q > Qu = iQ > In. Furthermore, we compared LPM method with methanol extraction method in view of the separation efficiency (yield, selectivity) of NHC.

• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1075-1080
• /
• 2009

혐기성 소화 시 산발효 단계에서 지질 성분이 부분적으로 분해되고 지질 내 이중 결합이 포화됨을 통해 후단의 메탄발효 효율이 향상됨이 보고된 바 있다. 본 연구에서는 혐기성 연속 회분식 반응조(anaerobic sequencing batch reactor, 이하 ASBR) 및 연속 흐름 교반 반응조(continuously stirred tank reactor, 이하 CSTR) 형태의 산생성조를 각각 운전하여 지질 분해 및 독성 저감 효율을 살펴보았다. 기질로는 두 가지 불포화(oleate and linoleate), 두 가지 포화(palmitate and stearate) 지방산(long-chain fatty acids, 이하 LCFA)로 구성된 LCFA 혼합물을 사용하였다. 반응조 내의 높은 미생물 보유량에 의해 ASBR이 수리학적 체류시간(hydraulic retention time, 이하 HRT) 12 hr 이하에서 우월한 성능을 보였다. HRT 9시간에서 ASBR은 36.7%의 LCFA 분해, 14.3%의 이중결합 포화, 43.8%의 산생성 효율을 보였으며, 이는 HRT 15시간의 CSTR 보다 각각 19%, 10%, 21% 높은 수치였다. 지질 함유 폐수의 혐기성 소화 시 ASBR을 이용한 산발효가 효과적일 것으로 판단된다.

• 한국수산과학회지
• /
• 제43권4호
• /
• pp.325-330
• /
• 2010

The apparent digestibility coefficients of dry matter, crude protein and energy in white fishmeal, herring meal, anchovy meal, salmon meal, sardine meal, mackerel meal, squid meal, soybean meal, corn gluten meal and wheat flour were determined for olive flounder. Digestibility coefficients were determined using a reference diet and test diets that contained 70% of the reference diet mixture and 30% test ingredients. All diets contained 0.5% chromic oxide as a digestibility indicator. The fish averaging 220 g were held in 500 L tanks at a density of 20 fish per tank. Feces were collected from three replicated groups of fish using a fecal collection column attached to a fish-rearing tank. The apparent dry matter, crude protein and energy digestibility coefficient values observed were in the ranges 29-79%, 59-95% and 45-91%, respectively, for various test ingredients. The apparent dry matter, crude protein and energy digestibility of white fishmeal, herring meal, anchovy meal, salmon meal, sardine meal, mackerel meal and squid meal were significantly higher than those of soybean meal, corn gluten meal and wheat flour.

• Journal of Microbiology and Biotechnology
• /
• 제10권1호
• /
• pp.75-80
• /
• 2000

An improved method of refolding recombinant human proinsulin from E. coli was presented. It was based on a two-stage stirred tank reactor in which denatured proinsulin-s-sulfonate was mixed instantaneously with a reaction buffer in the first stage reactor, and then fed to the second stage reactor. The mixture was stirred further for a total of 30h in the second stage reactor. In this system, unfavorable effects present due to the increase in reaction volume and protein concentration for protein refolding, which becomes significant in a large-scale operation, were avoided. Refolding yields of over 80% was obtained for achieving reaction volume of upto 50 l at protein concentration of 1 mg/ml. The optimum urea concentration was 1M. Refolding yield at the 1-1 reaction volume and protein concentration of 0.5mg/ml was increased about 2.5-fold, compared to that in a batch reactor. By increasing protein concentration in a two-stage refolding reaction, the cost for insulin production could be reduced, therefore, making this process economical.