• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.517-524
• /
• 2018

This study using a method different from those employed previously, the anatomical characteristics of paper-mulberry wood were confirmed by observing three different sections. In addition, the factors affecting the pulp and papermaking processes were analyzed in terms of morphological properties such as the fiber length and width, lumen width, and chemical composition of the paper-mulberry bast fiber. The anatomical characteristics of the paper-mulberry wood were a ring porous or semi-ring porous structure with the vessels showing solitary pore and radial array. The medullary ray of the tangential section showed 1-3 rows and common helical thickening. Consequently, the paper-mulberry wood has the same anatomical characteristics throughout. The morphological characteristics of the paper-mulberry bast fiber are a fiber length of 6.58 to 9.01 mm, fiber width of 15.85 to $27.80{\mu}m$, lumen width of 4.50 to $12.54{\mu}m$. The D sample of Gangwon was the most suitable for the pulp and papermaking processes, in terms of its derived morphological ratios. Comparing the chemical compositions, the C sample of Gyeongsang had a high holocellulose content (90%). Thus, the findings herein will aid in determining the quality of Korean paper post production.

• Journal of The Korean Association For Science Education
• /
• v.27 no.9
• /
• pp.919-929
• /
• 2007

Some Korean terminologies related to the structures of vascular tissues in plant morphology, written differently depending upon textbooks and dictionaries, were analysed to propose properly expressed Korean terminologies. A total of 14 university textbooks such as general biology, plant biology, and plant morphology were selected and investigated. The terminologies on the xylem structures, i.e., apotracheal parenchyma, paratracheal parenchyma, tylose, and tangential (longitudinal) section; and on the pit structures i.e., simple pit, bordered pit, aspirated bordered pit, and pit aperture; and on the stelar structures, i.e., haplostele, actinostele, plectostele, and solenostele were examined. The definition and etymology of the terminologies were traced in 4 textbooks of plant anatomy and 2 dictionaries of biology and botany written in English. And then reasonably expressed Korean terminologies, mostly written in Chinese characters, were suggested. The terminologies were compared with those that appeared in the Iwanami dictionary of biology published in Japan. It was expected that the results would contribute to promote mutual understanding between teachers and students in learning plant biology.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.23-32
• /
• 2008

Anatomical and physical characteristics of seven cultivars of chestnut wood (Castanea crenata Sieb. et Zucc.), Tanzawa, Ibuki, Mansung, Arima, Ginyose, Tsukuba, and Riheiguri, were investigated to obtain some valuable information for their possibilities to be used for high quality furnitures and woodcrafts. Solitary pore and figured-porous or ring-porous wood types were observed in wide growth rings, and ring-porous in narrow growth rings. Procumbent type was prevalent in ray cells although upright and square types were scarcely existed. Uniseriate, biseriate, and multiseriate rays were observed in tangential section. Uniseriate ray was abundant near the pith, and biseriate and multiseriate rays were frequently existed near the bark. The occurrence rate of biseriate and multiseriate rays was significantly high in Tanzawa, Ibuki, Mansung and Tsukuba, but was somewhat low in Arima, Ginyose and Riheiguri. The inner region showed larger vessel diameter, more vessel number, fewer ray number and higher ray height than the outer region. Growth-ring width in inner region was larger than that in outer region. Growth-rings in inner region of Mansung and Arima were wide while that of Ibuki was narrow. Outer region in all cultivars showed higher latewood percentage than inner region. Especially, Mansung and Tsukuba showed significantly high latewood percentage in their outer region. Green moisture content and density of heartwood were higher than those of sapwood. Tsukuba and Riheiguri had higher green moisture content, and Ibuki and Riheiguri had higher green density than the other chestnut cultivars.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.2
• /
• pp.3-19
• /
• 1978

Five species, Abies koreana Wilson (A. koreana), Castanopsis cuspidata var. Sieboldii Nakai (C. Cuspidata). Machilus thunbergii Sieb. et Zucc. (M. thunbergii), Styrax japonica (S. japonica), and Quercus acuta Thunberg(Q. acuta) growing in the southern part of Korea were selected for the investigation of wood properties. In order to evaluate the wood properties of these five species, anatomical, physical, mechanical, chemical and pulping characteristics were investigated. And this study also covered wood technological problems related to the drying, gluing, debarking, flooring, and wood workability so that these species might serve to the best advantage. The results obtained were summarized as follows: 1. The trunk of A. koreana with many knots was straight. However, the trunks of S. japonica and C. cuspidata were crooked. 2. A. koreana showed the longest and the widest ill the fiber morphology; 2.97mm in length, 39.3${\mu}$ in width. In general, fiber width of all the species investigated were greater than those of other Korean hardwoods. 3. The specific gravity of Q. acuta was 0.74${\pm}$0.03, and that of A.koreana was 0.34${\pm}$0.02. The range of specific gravity of the other species was 0.47-0.52. 4. The adsorption of water was propotioned inversely with the specific gravity, but the adsorption of humidity was proportioned with the specific gravity. In spite of their medium density, S. japonica showed the greatest adsorption, and M. thunbergii the least. The water adsorption of cross section was twice greater than that of lateral direction, and there was a slight difference in between the radial and the tangential direction. 5. Shrinkage for tested five species was ranged from 5.36 to 10.24% in tangential direction, and 2.83~6.13% in radial direction. Q. acuta recorded the greatest shrinkage rate, and A. koreana the least. The greater was the specific gravity, the larger was the shrinkage rate. 6. The mechanical properties of Q. acuta were similar to those of Quercus mongolica which grow in Kangwon-Do. Strength properties of C. cuspidata, M. thunbergii, A. koreana were equivalent to those of other Korean commercial woods with similar specific gravity, except S. japonica which showed slightly higher strength than that of other species with similar density. 7. Higher glue joint strength for urea and phenol adhesieves was recorded in the species of M. thunbergii and C. cuspidata, however, high-density species(Q. acuta) and even low-density species(A. koreana) did not show good joint strength. 8. The attractive figure of M. thunbergii in texture seemed to he appreciated for decoration. And the grain and texture of other species were proper for furniture and building materials. 9. All of the species except Q. acuta were considered good for wood workability. 10. The denser the specific gravity was, the longer the drying time took. However, severe drying defects were formed in M. thunbergii whose density was medium. 11. All the species were considered suitable for the flooring wood expect A. koreana whose density was light. 12. Pentosan component in all the species was great, and the amount of extractives in Q. acuta was worth noticing. 13. Yield in kraft pulp was above the level of economic pulp yield, i.e. 45% in all species. 14. Debarking was easy in the species of A. koreana and M. thunbergii, and debarking after being boiled in water was the most efficient in all species.