• 동력기계공학회지
• /
• 제4권3호
• /
• pp.25-33
• /
• 2000

This study represents three-dimensional turbulent flow characteristics around an axial fan measured at the operating point ${\varphi}=0.32$, which is equivalent to the maximum flowrate region, by using three-dimensional fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSA's, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fog is used for laser particles in this study. Mean velocity profiles around an axial fan along the downstream radial distance show that the streamwise and the tangential components exist as a predominant velocity and have the maximum value at the radial distance ratio 0.8, while the radial component has a small scale distribution and its flow direction is inward except a part of blade tip. The turbulent intensity profiles show that the radial component exists the most greatly. And also the turbulent kinetic energy shows about 60% as a maximum value at the radial distance ratio 0.9. Moreover, the Reynolds shear stresses do not exist at upstream flow, but the streamwise and the radial components of them show about 20% as a maximum value at the radial distance ratio 0.9 at downstream flow.

• 에너지공학
• /
• 제11권4호
• /
• pp.350-358
• /
• 2002

The present work determined the flame structure characteristics of coal syngas combusted inside swirl burners with various nozzle types. Fuel nozzle types are largely classified into two groups of axial and tangential. Experiments were carried out for investigating the effects of fuel nozzle geometry, fuel composition ratio, heating rate, excess air, and degree of swirl on the turbulent diffusion flame structure. To determine the characteristics of the flame structure, axial type fuel nozzle diameter of laboratory-scale combustor is varied to 1.23, 1.96, and 2.95 ㎜ and the direction of tangential type nozzles are varied to radial, clockwise, and counter-clockwise. The comparison of the experimental results was performed to understand functional parameters relating the flame structure. Data analysis showed that the vertical straight flame height generally decreased with increasing swirl number and decreasing axial type nozzle diameter. Flame height established with tangential type nozzle is 3 times shorter than that with vertical type. The flame structures among the 3 different tangential fuel nozzles relatively showed no particular difference. By increasing the heating rate, the width of flame increased generally in both vertical and tangential flame. Within the present experimental parameters of the investigation, flame structure is mainly depends on the nozzle type of the combustor. The visually investigated flame lengths are confirmed through the analysis of temperature profile of each flame.

• Wind and Structures
• /
• 제36권3호
• /
• pp.161-174
• /
• 2023

The analytical model of tornado vortices plays an essential role in tornado wind description and tornado-resistant design of civil structures. However, there is still a lack of guidance for the selection and application of tornado analytical models since they are different from each other. For single-cell tornado vortices, this study conducts a comparative study on the velocity characteristics of the analytical models based on numerically simulated tornado-like vortices (TLV). The single-cell stage TLV is first generated by Large-eddy simulations (LES). The spatial distribution of the three-dimensional mean velocity of the typical analytical tornado models is then investigated by comparison to the TLV with different swirl ratios. Finally, key parameters are given as functions of swirl ratio for the direct application of analytical tornado models to generate full-scale tornado wind field. Results show that the height of the maximum radial mean velocity is more appropriate to be defined as the boundary layer thickness of the TLV than the height of the maximum tangential mean velocity. The TLV velocity within the boundary layer can be well estimated by the analytical model. Simple fitted results show that the full-scale maximum radial and tangential mean velocity increase linearly with the swirl ratio, while the radius and height corresponding to the position of these two velocities decrease non-linearly with the swirl ratio.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.71-76
• /
• 1994

단일 쌍극자 모델을 이용한 source localization 문제에서 전극의 갯수, 쌍극자의 위치 및 방향 등이 S/N(signal to noise ratio)과 추정 오차사이의 관계에 미치는 영향을 Monte Carlo 시뮬레이션으로 조사했다. forward problem은 3중 구각 모델로 계산했고, simplex 방법으로 쌍극자 파라미터를 최적화시켰다. 전극의 갯수가 많을때, 쌍극자가 뇌 중심(midbrain)보다 대뇌 피질(cortex)부근에 있을 때, 쌍극자가 tangential 방향일 때 추정 오차의 평균과 표준편차가 작아졌다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.1-8
• /
• 2015

본 연구는 4개 종자산지(Yugoslavia, Italy, United Kingdom, Bulgary)의 글루티노사오리나무(24년생)를 대상으로 물리적 특성을 조사하여 생장(평균연륜폭)과 목재의 재질관계를 규명하였다. 함수율, 밀도, 수축률 및 T/R비는 모두 산지간에 차이가 없었다. 또한 이런 성질들은 생장과도 관계가 없는 것으로 나타났다. 종자산지가 다른 글루티노사오리나무의 중요한 재질지표인 밀도와 수축률의 경우, 생장의 차이에 따라 밀도와 수축률이 차이가 거의 없는 것으로 나타나, 생장이 우수한 것이 우수품종의 기준일 것으로 생각된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2029-2034
• /
• 2004

Spiral jet is characterized by a wide region of the free vortex flow with a steep axial velocity gradient, while swirl jet is largely governed by the forced vortex flow and has a very low axial velocity at the jet axis. However, detailed generation mechanism of spiral flow components is not well understood, although the spiral jet is extensively applied in a variety of industrial field. In general, it is known that spiral jet is generated by the radial flow injection through an annular slit which is installed at the inlet of a conical convergent nozzle. The present study describes a computational work to investigate the effects of annular slit on the spiral jet. In the present computation, a finite volume scheme is used to solve three dimensional Naver-Stokes equations with RNG ${\kappa}-{\varepsilon}$ turbulent model. The annular slit width and the pressure ratio of the spiral jet are varied to obtain different spiral flows inside the conical convergent nozzle. The present computational results are compared with the previous experimental data. The results obtained obviously show that the annular slit width and the pressure ratio of the spiral jet strongly influence the characteristics of the spiral jets, such as tangential and axial velocities.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.371-376
• /
• 2001

The operating point of a small-sized axial fan for refrigerator is strongly dependent upon the system resistance. Therefore, the turbulent flow characteristics around a small-sized axial fan may change significantly according to the operating point. This study represents three-dimensional turbulent flow characteristics around a small-sized axial fan measured at the four operating points such as $\varphi=0.1$, 0.18, 0.25 and 0.32 by using fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSA's, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fluid is utilized for supplying particles by means of fog generator. Mean velocity profiles downstream of a small-sized axial fan along the radial distance show that both the streamwise and the tangential components exist predominantly in downstream except $\varphi=0.1$ and have a maximum value at the radial distance ratio of about 0.8, but the radial component, which its velocity is relatively small, is acting role that only turns flow direction to the outside or the central part of axial fan. Moreover, all of the velocity components downstream at $\varphi=0.1$ show much smaller than those upstream due to the static pressure rise at the low-flowrate region.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.340-343
• /
• 2007

The differential equations governing free, in-plane vibrations of non-circular arches with the translational (radial and tangential directions) and rotational springs at the ends, including the effects of rotatory inertia, shear deformation and axial deformation, are solved numerically using the corresponding boundary conditions. The lowest four natural frequencies for the parabolic geometry are calculated over a range of non-dimensional system parameters: the arch rise to span length ratio, the slenderness ratio, and the translational and rotational spring parameters.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.28-32
• /
• 2011

This research was carried out to examine the ultrasonic properties of $Phyllostachys$ $bambusoids$ Sieb et Zucc depending on three directions for providing the fundamental properties of the Korea traditional flute, Daekeum. The ultrasonic properties of $Phyllostachys$ $bambusoids$ Sieb. et Zucc were found to be different from those of wood, because of the distinctive anatomical structure of bamboo tissue. The ultrasonic velocity of peripheral zone showed higher values of all three directions. The ratio of longitudinal velocities to perpendicular velocities showed 1.16 at peripheral zone, 1.70 at central zone, 1.38 at inner zone respectively. The ratio of radial velocities to tangential velocities were measured as 1.286 at peripheral zone, 1.325 at central zone, 0.829 at inner zone respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제21권4호
• /
• pp.45-54
• /
• 1993

This study examines the differences in structures, physical and mechanical properties between domestic(Quercus variabilis Blume) and foreign(Quercus suber L.) corks. The results obtained are as follows: 1. The cork tissue consists of cork cells, lenticels, sclereids and dark-brown zone. There was a significant difference in ratio of cork cells between foreign cork(93 %) and domestic cork(87 %). The ring width and width of late cork of the foreign cork were wider than those of domestic cork. But the percentage of late cork of domestic cork was richer than that of foreign cork. The size of cork cell of foreign cork was larger by about two times than that of domestic cork. 2. The density was slightly higher in domestic cork(0.22 g/$cm^3$) than in foreign cork(0.19 g/$cm^3$). During first 24 hours, the amount of water absorption of the foreign cork was greater than that of domestic cork. However, after 24 hours, the tendency was reversed. The level of EMC was higher in domestic cork than in foreign cork. Total shrinkage in the radial and tangential directions was larger in domestic cork than tn foreign cork. In the longitudinal direction, the tendency was reversed. There was no difference in total swelling in three woody directions between the two corks. 3. The modulus of elasticity in compression in the logitudinal and tangential direction was higher in domestic cork than in foreign cork, but the tendency was reversed in the radial direction. Both corks showed 95% of recovery rate after 24 hours when they were compressed by 0.5. There were no differences in tension strength and Brinell,s hardness bet ween domestic and foreign corks.