• 한국통신학회논문지
• /
• 제28권11A호
• /
• pp.883-890
• /
• 2003

본 논문에서는 접지된 유전체평면 위에 변하는 저항율을 갖는 저항띠 격자구조의 전자파 산란문제를 수치해석 방법인 FGMM(Fourier-Galerkin Moment Method)을 이용하여 스트립 폭 및 주기, 유전체층의 비유전율 및 두께, 입사각에 따라 수치 해석하였다. 산란전자계는 Floquet 모드함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 저항띠 경계조건은 접선성분의 전계와 스트립의 유도전류와의 관계를 위해 이용하였다. 저항띠의 변하는 저항율은 저항띠의 양끝에서 0으로 변하는 경우를 취급하였고, 이때 유도되는 표면 전류밀도는 2종 Chebyshev 다항식의 급수로 전개하였다. 본 논문에서 변하는 저항율이 0을 갖는 도체띠에 대한 정규화 된 반사전력은 기존 논문의 결과와 매우 잘 일치하였다.

• 정보학연구
• /
• 제4권3호
• /
• pp.77-86
• /
• 2001

본 논문에서는 접지평면위에 2개의 유전체 층을 가지는 저항띠 격자구조에서의 전자파 산란 문제를 수치해석 방법으로 잘 알려진 PMM 방법을 적용하여 저항띠의 저항을, 유전체층의 비유전율 및 두께, 입사각에 따라 수치해석하였다. 산란 전자계는 Floquet 모드 함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 저항띠의 경계조건은 접선성분의 전계와 스트립 위의 전류와의 관계를 위해 적용하였다. 유전체층의 비유전율 및 두께가 커질수록 정규화된 반사전력이 커짐을 알 수 있었고, 스트립 폭의 값이 왼쪽에서 오른쪽으로 가면서 큰 값으로 이동하였다. 그리고 본 논문의 저항율이 영일 때 기존의 논문과 비교하여 매우 일치하였으며, 급변점에서의 대부분의 에너지는 입사각 이외의 다른 방향으로 산란된다.

• 한국광학회지
• /
• 제18권1호
• /
• pp.37-43
• /
• 2007

LCD(liquid crystal display) 기판의 표면검사용 광학장치의 성능평가를 위한 변조전달함수 측정장치를 설계하고 제작하였다. 이 장치에는 3개의 막대물체 모양의 USAF(United States Air Force) 해상도 물체와 적분구로 구성한 물체발생장치와 2차원 CCD(charge coupled device)의 상분석 장치를 사용하였다. 시험렌즈의 변조전달함수는 물체와 상의 명암비를 나눈 명암전달함수를 구한 후 변조 전달함수로 보정하여 변환시켰다. 제작된 평가장치를 이용하여 배율 2.6배, F/13.65의 시험 광학계를 평가하였으며, 공간주파수 62.5 1p/mm에서 자오면에 대해서 30.6 %, 구결면에 대해서 26.1 %의 값을 얻었다.

• 한국광학회지
• /
• 제17권5호
• /
• pp.447-454
• /
• 2006

Brewster 각으로 양면이 가공된 $Cr^{4+}$ : YAG 결정이 장치된 Z자형 공진기의 안정영역에 대하여 열 렌즈 효과를 고려하지 않았을 때와, 고려하였을 때의 경계값의 해석적 해를 구하였다. 또한 수차 변환 행렬들을 사용하여 공진기의 안정성, 빔 허리, 그리고 비점수차 보상에 대한 열 렌즈 효과가 미치는 영향도 알아보았다. 결정이 오목거울 사이의 중간 위치에 놓이고, 오목거울과 반사거울 및 출력거울의 거리가 같을 때에는 공진기의 안정영역에 미치는 열 렌즈 효과의 영향은 적으나, 빔 허리는 반사거울에서 구결면보다 자오면에서의 영향이 더 크므로 열 렌즈 효과가 있을 때의 비점수차 보상은 더 어려워진다. 이러한 결과는 Kerr 렌즈 모드 잠금에서도 열 렌즈 효과가 고려되어야 함을 보인다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.221-224
• /
• 2004

A theoretical model has been studied to describe the sound radiation analysis for structure vibration noise of vehicle tires under the action of random moving line forces. When a tire is analyzed, it had been modeled as curved beams with distributed springs and dash pots that represent the radial , tangential stiffness and damping of tire, respectively. The reaction due to fluid loading on the vibratory response of the curved beam is taken into account. The curved beam is assumed to occupy the plane y=0 and to be axially infinite. The curved beam material and elastic foundation are assumed to be lossless Bernoulli-Euler beam theory including a tension force, damping coefficient and stiffness of foundation will be employed. The expression for sound power is integrated numerically and the results examined as a function of Mach number, wave-number ratio and stiffness factor. The experimental investigation for structure vibration noise of vehicle tire under the action of random moving line forces has been made. Based on the Spatial Transformation of Sound Field techniques, the sound power and sound radiation are measured. Results strongly suggest that operation condition in the tire material properties and design factors of the tire govern the sound power and sound radiation characteristics.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.59-76
• /
• 2016

The non-linear Hoek-Brown failure criterion has been widely accepted and applied to evaluate the stability of rock slopes under plane-strain conditions. This paper presents a kinematic approach of limit analysis to assessing the static and seismic stability of three-dimensional (3D) rock slopes using the generalized Hoek-Brown failure criterion. A tangential technique is employed to obtain the equivalent Mohr-Coulomb strength parameters of rock material from the generalized Hoek-Brown criterion. The least upper bounds to the stability number are obtained in an optimization procedure and presented in the form of graphs and tables for a wide range of parameters. The calculated results demonstrate the influences of 3D geometrical constraint, non-linear strength parameters and seismic acceleration on the stability number and equivalent strength parameters. The presented upper-bound solutions can be used for preliminary assessment on the 3D rock slope stability in design and assessing other solutions from the developing methods in the stability analysis of 3D rock slopes.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.24-32
• /
• 2004

The effects of guide vanes and tip clearances on the characteristics nf axial flow fans are investigated both computationally and experimentally. Performance test of fans carried out in full scale shows considerable effects of tip clearance between rotor tip and duct on the characteristics of fans. The tested results are compared with the computation based on the finite volume method to solve the Navier-Stoke equations with $textsc{k}$-$\varepsilon$ turbulence model. The comparison shows good agreements between experimental and computational results. In addition, the effects of shape of guide vanes are numerically studied. The results show that increased volume of separated region around the guide vane reduces the recovery of tangential component of kinetic energy in the wake, resulting in loss of efficiency

• Advances in aircraft and spacecraft science
• /
• 제2권4호
• /
• pp.427-443
• /
• 2015

The present paper is the follow-on of a former work in which the influence of the gas-surface interaction models was evaluated on the aerodynamic coefficients of an aero-space-plane and on a section of its wing. The models by Maxwell and by Cercignani-Lampis-Lord were compared by means of Direct Simulation Monte Carlo (DSMC) codes. In that paper the diffusive, fully accommodated, semi-specular and specular accommodation coefficients were considered. The results pointed out that the influence of the interaction models, considering the above mentioned accommodation coefficients, is pretty strong while the Cercignani-Lampis-Lord and the Maxwell models are practically equivalent. In the present paper, the comparison of the same models is carried out considering the dependence of the accommodation coefficients on the angle of incidence (or partial accommodation coefficients). More specifically, the normal and the tangential momentum partial accommodation coefficients, obtained experimentally by Knetchel and Pitts, have been implemented. Computer tests on a NACA-0012 airfoil have been carried out by the DSMC code DS2V-64 bits. The airfoil, of 2 m chord, has been tested both in clean and flapped configurations. The simulated conditions were those at an altitude of 100 km where the airfoil is in transitional regime. The results confirmed that the two interaction models are practically equivalent and verified that the use of the Knetchel and Pitts coefficients involves results very close to those computed considering a diffusive, fully accommodated interaction both in clean and flapped configurations.

• Structural Engineering and Mechanics
• /
• 제26권6호
• /
• pp.651-672
• /
• 2007

This study presents an improved method that uses the elastic and inelastic system buckling analyses for determining the K-factors of steel column members. The inelastic system buckling analysis is based on the tangent modulus theory for a single column and the application is extended to the frame structural system. The tangent modulus of an inelastic column is first derived as a function of nominal compressive stress from the column strength curve given in the design codes. The tangential stiffness matrix of a beam-column element is then formulated by using the so-called stability function or Hermitian interpolation functions. Two inelastic system buckling analysis procedures are newly proposed by utilizing nonlinear eigenvalue analysis algorithms. Finally, a practical method for determining the K-factors of individual members in a steel frame structure is proposed based on the inelastic and/or elastic system buckling analyses. The K-factors according to the proposed procedure are calculated for numerical examples and compared with other results in available references.

• Journal of Plant Biology
• /
• 제37권3호
• /
• pp.317-323
• /
• 1994

The calluses formed on the surface of a quarter-girdled Robinia pseudoacacia stems have been shown to originate from immature xylem cells and preexisting cambial cells. The cellus is not only formed by periclinal and anticlinal divisions of radial cells, but also axial cells. In tangential view, the callus at initial stage showed heterogeneous structure composed of long and short cells and then homogeneous one with short cells. Some cells of homogeneous structure in middle region of callus at early stage is later elongated and others mainly divided in trasverse plane. In the result the homogeneous structure becomes into a heterogeneous one. Subsequently, the long cells in heterogeneous structures elongated further and became fusifrom initials, and the short cells divided transversely became ray initials. The appearence of homogeneous and heterogeneous structure in the callus on debarked stem without organ elongation is almost similar to that of the structure in the procambium of young stem which is elongating extensively. Eventually, the ontogeny of vascular cambium in wound callus resembles that of a young stem grown normally, although the debarked stem does not grow in length but in girth and the young stem elongates activity. These findings mean that the active intrusive growth of short procambial cells occurs during the differentiation of fusiform cambial cells.