• 제목/요약/키워드: tangential force

검색결과 171건 처리시간 0.026초

The Stress Field in a Body Caused by the Tangential Force of a Rectangular Patch on a Semi-Infinite Solid

  • Cho, Yong-Joo;Kim, Tae-Wan;Lee, Mun-Ju
    • KSTLE International Journal
    • /
    • 제2권1호
    • /
    • pp.29-34
    • /
    • 2001
  • The stress field in a body caused by the tangential loading of a rectangular patch on a semi-infinite solid has been solved analytically using a potential function. The validity of the results of this study was preyed by Saint-Venant's principle in the remote region and by the superposition of point loads in the vicinity of the surface.

  • PDF

A Study on the Mechanics of Shear Spinning of Cones

  • Kim Jae-Hun;Park Jun-Hong;Kim Chul
    • Journal of Mechanical Science and Technology
    • /
    • 제20권6호
    • /
    • pp.806-818
    • /
    • 2006
  • The shear spinning process, where the plastic deformation zone is localized in a very small portion of the workpiece, shows a promise for increasingly broader application to the production of axially symmetric parts. In this paper, the three components of working force are calculated by the newly proposed deformation model in which the spinning process is understood as shearing deformation after uniaxial yielding by bending, and shear stress, $\tau_{rz}$ becomes $\kappa$, yield limit in pure shear, in the deformation zone. The tangential forces are first calculated and the feed forces and the normal forces are obtained by the assumption of uniform distribution of roller pressure on the contact surface. The optimum contact area is obtained by minimizing the bending energy required to get the assumed deformation of the blank. The calculated forces are compared with experimental results. A comparison shows that theoretical prediction is reasonably in good agreement with experimental results.

국내 연안 카페리 차량 고박 장치 안전성에 관한 연구: 제2부 가속도 예측 방법에 따른 고박 안전도 비교 연구 (Study on Structural Safety of Car Securing Equipment of Coastal Carferry: Part II Assessment of Lashing Safety according to Acceleration Prediction Approaches)

  • 정준모;조희상;이경훈;이영우
    • 한국해양공학회지
    • /
    • 제30권6호
    • /
    • pp.451-457
    • /
    • 2016
  • For a carferry with a displacement of 1,633 tonf, a seakeeping analysis-based direct load approach (DLA) was used in Part I of these series, where the final deliverable was the long-term probabilistic acceleration components. In Part II of these series, the tangential acceleration components are explained based on two approaches: a standard called the IMO CSS code and simple formulas with the probable maximum roll and pitch rotations. The subsequent tangential acceleration-induced external force components are also introduced for these two approaches. The lashing strength components were selected from the IMO CSS code. It was assumed that two different vehicles (a car and a truck) were stowed at the most distant locations on the main deck to assume the largest tangential acceleration components and were secured with four steel wires with longitudinal and transverse lashing angles of $45^{\circ}$. Four cases were considered, with different methods for predicting the acceleration components and different tools for the external loads and lashing strengths involved: cases Rule-LS (rule-based maximum probable roll and pitch angles for predicting the acceleration components in conjunction with LashingSafety), DLA-LS (seakeeping-based long-term acceleration components with LashingSafety), CSS-LC (IMO CSS code-based acceleration components using LashCon), and CSS-LS (IMO CSS code-based acceleration components using LashingSafety). In terms of the acceleration and external force components, the CSS-LC and CSS-LS results are more than two times the results of Rule-LS. Thus, when the external forces and lashing strengths are evaluated using CSS-LC and CSS-LS, the truck needs more lashing wires, while Rule-LS and DLA-LS predict that the present lashing configuration is on the safe side.

경사 종동력을 받는 변단면 기하 비선형 캔틸레버 기둥의 수치해석 (Geometrical Non-linear Analyses of Tapered Cantilever Column Subjected to Sub-tangential Follower Force)

  • 이병구;오상진;이태은
    • 한국전산구조공학회논문집
    • /
    • 제26권1호
    • /
    • pp.29-38
    • /
    • 2013
  • 이 연구는 자유단에 경사 종동력을 받는 변단면 기하 비선형 캔틸레버 기둥의 수치해석에 관한 연구이다. 기둥의 단면은 휨 강성이 부재축을 따라 함수적으로 변화하는 변단면으로 선택하였다. 이러한 기둥의 정확탄성곡선을 지배하는 미분방정식을 대변형 이론을 이용하여 유도하였다. 이 미분방정식은 자유단 수직변위, 수평변위 및 회전각의 3개의 미지변수를 갖는다. 이 미분방정식을 반복법으로 수치해석하여 기둥의 미지변수와 정확탄성곡선을 산정하였다. 이 연구의 이론을 검증하기 위하여 실험실 규모의 실험을 실행하였다.

Unbalanced Magnetic Forces in Rotational Unsymmetrical Transverse Flux Machine

  • Baserrah, Salwa;Rixen, Keno;Orlik, Bernd
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권2호
    • /
    • pp.184-192
    • /
    • 2012
  • The torque and unbalanced magnetic forces in permanent magnet machines are resultants of the tangential, axial and normal magnetic forces, respectively. Those are in general influenced by pole-teeth-winding configuration. A study of the torque and unbalanced magnetic forces of a small flux concentrating permanent magnet transverse flux machine (FCPM-TFM) in segmented compact structure is presented in this paper. By using FLUX3D software from Cedrat, Maxwell stress tensor has been solved. Finite element (FE-) magneto static study followed by transient analysis has been conducted to investigate the influence of unsymmetrical winding pattern, in respect to the rotor, on the performance of the FCPM-TFM. Calculating the magnetic field components in the air gap has required an introduction of a 2D grid in the middle of the air gap, whereby good estimations of the forces are obtained. In this machine, the axial magnetic forces reveal relatively higher amplitudes compared to the normal forces. Practical results of a prototype motor are demonstrated through the analysis.

전향력 발생 원리를 고등학생들에게 설명하기 위한 새로운 방법 (Assisting High School Students to Redefine the Principle of Coriolis Force)

  • 장승환;박효진;조규성;문병권
    • 한국지구과학회지
    • /
    • 제32권1호
    • /
    • pp.73-83
    • /
    • 2011
  • 우리는 전향력 발생원리를 설명하기 위한 새로운 방법을 개발하고, 이를 5명의 10학년 학생들에게 적용하여 나타난 반응을 분석하였다. 중등과학 교과서에서 전향력 실험을 위해 회전원판이 자주 사용된다. 그런데 회전원판에 대한 명확한 설명이 없기 때문에, 회전원판이 북극을 중심으로 자전하는 지구를 나타낸다고 오해할 가능성이 높다. 이 연구는 회전원판이 임의의 위도에 접하는 평면이라는 사실에 중점을 두었다. 학생들은 회전원판의 이런 특징을 이해하면서 전향력을 쉽게 이해할 수 있었다. 덧붙여 우리는 회전원판과 전향력의 관계를 이해할 수 있게 도와주는 방법을 제시하려 하였다. 이 방법은 학교 교육에서 전향력의 특징을 좀 더 명확히 이해하는 데 도움이 될 것이다.

자기 차폐를 이용한 전방향 자기차륜 (Omni-Directional Magnet Wheel using Magnetic Shield)

  • 심기본;이상헌;정광석
    • 한국정밀공학회지
    • /
    • 제26권9호
    • /
    • pp.72-80
    • /
    • 2009
  • When the magnet wheel rotates over a conducting plate, it generates the traction torque as well as the repulsive force on the conducting plate. Partially-cut traction torque results in the linear force into the tangential direction. To cut the traction torque, the concept of magnetic shield is introduced. The direction change of the linear force is realized varying the shielded area of magnetic field. That is, the tangential direction of non-shielded open area becomes the direction of the linear thrust force. Specially a shape of permanent magnets composing the magnet wheel leads to various pattern of magnetic forces. So, to enlarge the resulting force density and compensate its servo property a few simulations are performed under various conditions such as repeated pattern, pole number, radial width of permanent magnets, including shape of open area. The theoretical model of the magnet wheel is derived using air-gap field analysis of linear induction motor, compared with test result and the sensitivity analysis for its parameter change is performed using common tool; MAXWELL. Using two-axial wheel set-up, the tracking motion is tested for a copper plate with its normal motion constrained and its result is given. In conclusion, it is estimated that the magnet wheel using partial shield can be applied to a noncontact conveyance of the conducting plate.

임프란트설계를 위한 저작시 상.하악골치아 사이의 충격력 계산 (Calculation of Impact Force between Teeth of Upper and Lower Jaw-Bones while Masticating for Dental Implant System Design)

  • 권영주
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 추계학술대회 논문집
    • /
    • pp.425-428
    • /
    • 2000
  • In this paper the impact force which occurs on each tooth of jaw-bones while masticating is calculated through the rigid body dynamic analysis. This analysis is done by ADAMS. The impact force calculated in this paper is required for the structural stress analysis of implant system which is needed for the implant system design. The analysis results show that the impact time decreases as the impact force increases, the largest impact force occurs on the front tooth and the impact force is almost normal to the tooth surface together with slight tangential force.

  • PDF

모션 다이나믹스를 이용한 로봇 매니퓰레이터의 힘/위치 제어 (Force/position control of robot manipulator via motion dynamics)

  • 임규만;함운철
    • 제어로봇시스템학회논문지
    • /
    • 제2권4호
    • /
    • pp.264-269
    • /
    • 1996
  • 본 논문에서는 디스트리뷰션 인테그랄 서브매니폴드에 의하여 표현되는 마찰이 없는 면을 따라 강체 로봇 매니퓰레이터의 모션 제어에 대한 새로운 힘.위치 제어법칙은 힘/위치가 제어되는 방향으로 투영된 앤드 이팩트의 비선형 항을 정확하게 상쇄하도록 설계하였으며, 미분기하학을 이용하여 스무스 디스트리뷰션의 인테그랄 서브매니폴드 상에서의 새로운 모션 방정식을 제안하고 제안된 힘/위치 제어법칙에 대한 타당성을 컴퓨터 시뮬레이션을 통하여 검증한다.

  • PDF

경사 종동력과 끝질량을 갖는 크랙 보의 안정성 해석 (Stability Analysis of Cracked Beams with Subtangential Follower Force and Tip Mass)

  • 손인수;윤한익;노태우
    • 대한기계학회논문집A
    • /
    • 제33권12호
    • /
    • pp.1410-1416
    • /
    • 2009
  • In this paper, the purpose is to investigate the stability and variation of natural frequency of a cracked cantilever beams subjected to follower force and tip mass. In addition, an analysis of the flutter instability(flutter critical follower force) of a cracked cantilever beam as slenderness ratio and crack severity is investigated. The governing differential equations of a Timoshenko beam subjected to an end tangential follower force is derived via Hamilton's principle. The two coupled governing differential equations are reduced to one fourth order ordinary differential equation in terms of the flexural displacement. Finally, the influence of the slenderness ratio and crack severity on the critical follower force, stability and the natural frequency of a beam are investigated.