• 제목/요약/키워드: tangent delta

검색결과 63건 처리시간 0.028초

Cryogenic microwave dielectric properties of Mg2TiO4 ceramics added with CeO2 nanoparticles

  • Bhuyan, Ranjan K.;Thatikonda, Santhosh K.;Dobbidi, Pamu;Renehan, J.M.;Jacob, Mohan V.
    • Advances in materials Research
    • /
    • 제3권2호
    • /
    • pp.105-116
    • /
    • 2014
  • The microwave dielectric properties of $CeO_2$ nanoparticles (0.5, 1.0 & 1.5wt%) doped $Mg_2TiO_4$ (MTO) ceramics have been investigated at cryogenic temperatures. The XRD patterns of the samples were refined using the full proof program reveal the inverse spinel structure without any secondary phases. The addition of $CeO_2$ nanoparticles lowered the sintering temperature with enhancement in density and grain size as compared to pure MTO ceramics. This is attributed to the higher sintering velocity of the fine particles. Further, the microwave dielectric properties of the MTO ceramics were measured at cryogenic temperatures in the temperature range of 6.5-295 K. It is observed that the loss tangent ($tan{\delta}$) of all the samples increased with temperature. However, the $CeO_2$ nanoparticles doped MTO ceramics manifested lower loss tangents as compared to the pure MTO ceramics. The loss tangents of the pure and MTO ceramics doped with 1.5 wt% of $CeO_2$ nanoparticles measured at 6.5K are found to be $6.6{\times}10^{-5}$ and $5.4{\times}10^{-5}$, respectively. The addition of $CeO_2$ nanoparticles did not cause any changes on the temperature stability of the MTO ceramics at cryogenic temperatures. On the other hand, the temperature coefficient of the permittivity increased with rise in temperature and with the wt% of $CeO_2$ nanoparticles. The obtained lower loss tangent values at cryogenic temperatures can be attributed to the decrease in both intrinsic and extrinsic losses in the MTO ceramics.

발전소에서 운전 중인 활성 6.6kV 전력 케이블의 고장상태를 파악하는 장치의 개발 (Developing Equipment to Detect the Deterioration Status of 6.6kV Power Cables in Operation at Power Station)

  • 엄기홍;이관우
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권4호
    • /
    • pp.197-203
    • /
    • 2014
  • 발전소의 전력 케이블 시스템에서 발생할 수 있는 사고를 예측하고 방지하는 기술이 필요하다. 사선 상태에 있는 케이블의 동작 특성을 진단하기 위하여 부분방전 및 $tan{\delta}$ 법이 사용되고 있으나, 케이블이 갖고 있는 문제점들을 사전에 발견하기란 쉬운 일이 아니다. 이 논문에서 우리가 연구한 케이블은 (주)서부 발전소에서 설치되어 운전 중인, 발전 운영에 핵심 역할을 하는 6.6kV 고전압 배전 선로이다. 케이블의 온도 및 전류를 측정하고, 이를 바탕으로 절연저항을 측정하기 위한 장치를 개발하였다. 이 장치를 발전소 현장에 시험 설치를 하였고, 동작 중인 케이블의 수명을 평가하기 위한 동작특성의 진단을 성공적으로 마무리 하였다. 진단 데이터를 분석 평가함으로써 단기적으로는 운전 중 6.6kV 케이블 시스템의 고장상태를 파악하는데 활용되며, 장기적으로는 발전소 부하에서의 6.6kV 케이블 시스템의 설치 및 운영에 있어서 원가를 절감하기 위한 노력에 기여하고자 한다.

소형화된 헤어핀 링 공진기를 이용한 발진기 설계 및 제작에 관한 연구 (A Study on the Design and Implementation of the Oscillator Using a Miniaturized Hairpin Ring Resonator)

  • 김장구;최병하
    • 한국항행학회논문지
    • /
    • 제12권2호
    • /
    • pp.122-131
    • /
    • 2008
  • 본 논문에서는 마이크로스트립 헤어핀 형태의 링 공진기를 이용하여 저위상 잡음을 개선한 소형화된 S 대역에 사용가능한 발진기를 설계 및 제작하였다. 기판은 고조파 특성이 우수한 유전율 ${\varepsilon}_r$=3.5 기판두께 h=20mil 금속두께 t=17um 손실 탄젠트 $tan{\delta}$=0.0025 인 TACONIC사의 RF-35를 사용하였다. 측정된 결과 발진 주파수는 2.45 GHz에서 출력전력은 20.9 dBm으로서 기존의 발진기에 비하여 상당히 높은 출력을 얻었고, 위상 잡음 특성은 100 kHz offset에서 -100.5 dBc/Hz 로서 기존의 발진기 성능과 비교하면 우수한 특성이 있음을 확인할 수 있었고, 고조파 억압 특성은 32 dBc 이상으로서 우수한 특성을 갖는 발진기임을 보여주었다. 본 논문에서 제안된 발진기의 형태를 이용하여 RFIC, MIC, MMIC 형태로 제작한다면 발진기를 소형화할 수 있을 것이며, 이 제작된 발진기는 S-밴드의 주파수원으로 이용 가능할 수 있을 것으로 사료된다.

  • PDF

탄성좌굴 고유치 및 2차 탄성해석법을 이용한 평면강절프레임의 개선된 좌굴설계법 (An Improved Stability Design of Plane Frames using System Buckling and Second-order Elastic Analysis)

  • 송주영;경용수;김남일;김문영
    • 한국전산구조공학회논문집
    • /
    • 제18권2호
    • /
    • pp.159-168
    • /
    • 2005
  • 탄성좌굴 고유치해석을 이용한 유효좌굴길이 산정법과 2차 탄성해석기법을 이용하여 축력과 휨모멘트를 받는 강절프레임의 보-기둥부재에 대하여 개선된 좌굴설계법을 제안한다. 이를 위하여 먼저 안정함수를 이용하여 보-기둥요소의 접선강성행렬을 유도하고, 탄성좌굴 고유치해석을 이용한 유효좌굴길이 산정법을 고찰한다. 또한 강절프레임에 대하여 소위 P-Delta 효과를 고려하는 2차 해석법을 제시한다. 해석예제를 통하여 먼저 2차 탄성해석과 기하학적 비선형해석에 의한 결과를 비교하여 2차 해석의 정확성을 검증하고, 강절프레임에 대한 기존의 설계법과 본 연구의 개선된 좌굴설계법에 대한 수치결과를 비교, 검토를 행한다.

키토산/카프로락탐 혼합체에 대한 수분의 영향 (Effect of Moisture on Molecular Motions of Chitosan/Polycaprotactam Blends)

  • 리아로센-쿤;훙치치;린망풍
    • 폴리머
    • /
    • 제28권5호
    • /
    • pp.433-443
    • /
    • 2004
  • 키토산과 폴리카프로락탐 (PA6) 복합체의 박막을 개미산을 사용하여 만들었다. FT-IR 분광학적 자료는 키토산의 히드록시기와 PA6의 아마이드기 사이의 수소 결합이 형성되었음을 보여주었다. 열무게분석법은 혼합체 시료는 수분을 포함하고 있음을 나타내었다. 시료 속의 물의 분산은 저장 탄성률 (E')을 크게 감소한다고 DMA 결과는 보여주었다. 혼합체 시료의 기게적 손실 탄젠트 (tan $\delta$) 자료는 $\beta$d 손실 피크가 $0^{\circ}C$ 부근에서 나타남을 보여주었다. 혼합체 시료들은 진공에서 완전히 건조하였고 그 다음 소위 w-다리를 만드는 물을 흡수할 수 있도록 높은 습도 속에 두었다. 이 시료들의 E' 자료는 비정상적으로 증가하였고 $50^{\circ}C$ 부근에서 손실 피크의 어깨에 추가적인 손실 피크가 나타났다. 건조한 조건하에서는, 40/60 혼합 비율의 키토산/PA6가 두 성분의 섞임성이 더 좋았다.

시간 및 온도변화에 따른 폴리아크릴로니트릴/디메틸술폭시드 중합체 용액의 유변학적 특성 연구 (Study on Rheological Characterization of Polyacrylonitrile/Dimethyl Sulfoxide Solution with Change of Storage Times and Temperatures)

  • 양재연;이병민;국윤수;김병석;서민강
    • Composites Research
    • /
    • 제32권1호
    • /
    • pp.71-77
    • /
    • 2019
  • 본 연구에서는 PAN 섬유용 폴리아크릴로니트릴(PAN)/디메틸술폭시드(DMSO) 용액의 보관시간 및 온도 변화에 따른 구조적 및 유변학적 특성에 대해 고찰하였다. 결과로서, 모든 PAN/DMSO 용액은 온도 변화에 따라 매우 특징적인 유변학적 거동을 보였다. 중합체 용액은 온도가 $40{\sim}70^{\circ}C$의 온도 범위까지 증가함에 따라 복합 점도가 증가하고 손실 계수($tan{\delta}$)가 감소함을 나타내었으며, 낮은 진동수에서 점도가 급격히 증가하는 것을 확인할 수 있었다. 이러한 결과는 저장 시간에 따라 중합체 용액내 물에 의한 분자간 수소 결합으로 겔 고분자 및 고밀도 겔 구조가 형성되었기 때문으로 판단된다.

무기물이 충진된 에폭시수지의 경화반응과 유변학적 거동에 관한 연구 (Cure Kinetics and chemorology of silica filled DGEBA/Polyxoypropylenediamine epoxy system)

  • 윤은상;이기윤;김대수
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
    • /
    • pp.125-126
    • /
    • 1994
  • The chemorheological changes and kinetics during curing reaction of an silica filled epoxy system (DGEBA with curing agent Polyxoypropylenediamine) were investigated. This study concentrates on the influence of silica on the reaction kinetics and rheological behavior of the eopxy system. The concentration of the filler was varied 0~200phr. Curing behavior of the silica filled epoxy system was measured at various heating rates with DSC. Conversion was also measured by integrating the obtained DSC curve and Kinetic parameters measured by using the nonlinear regression method. DSC experiments showed that the presence of silica was found to accelerate the progress of the curing reaction and of reduce the heat of reaction compared with that of unfilled epoxy systems . Rheological experiments were conducted on a Physica by using a disposable parallel plate fixture. Material properites were measured such as the elastic modulus(G′), the loss modulus(G"), the loss tangent(tan $\delta$), and the viscosity was at the initial stahe, and the more the silica filler was added, and the lower the gel temperature was in the epoxy system. In this study it is concluded that the curing of the silica filled epoxy system was found to be accelerated, as silica was added to the epoxy compound.

  • PDF

(Ba,Sr,Mg)$TiO_3$를 이용한 입계층 캐패시터의 제작 및 유전특성에 관한 연구 (The preparation and characteristics of (Ba,Sr,Mg) $TiO_3$ ceramic for BL capacitor)

  • 오재유;오의균;강도원;김범진;박태곤
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.251-254
    • /
    • 1998
  • The ($0.8BaTiO_3-0.1SrTiO_3-0.1MgTiO_3$)+$0.006Nb_2O_5$ ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300C for 3hours and then annealed at $1,100^{\circ}C$ for 3hours in a atmosphere (air) to be painted on the surface with CuO paste. The results of the temperature and frequency are varied, the dielectric constant and loss tangent are unsuitable for BL capacitor. The dielectric constants were varied to be negative temperature coefficient(2.000-3,000) in the temperature range between -10 and $140^{\circ}C$, the dissipation factors (tan $\delta$) were some high(0.1-0.3). It was not grain insulation, in cause of the some difficult to be annealed temperature with CuO paste and fired atmosphere. But, we have some different annealing temperature and fired atmosphere, it will be suitable BL(Boundary Layer)capacitor.

  • PDF

유기 발광 다이오드의 유전분극에 관한 연구 (A Study on the Dielectric Polarization of Organic Light-Emitting Diodes)

  • 오용철;정동회;신철기;김진사;김기준;김상진;김충혁;김태완
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.490-491
    • /
    • 2007
  • We have investigated dielectric polarization in organic light-emitting diodes using 8-hydroxyquinoline aluminum$(Alq_3)$ as an electron transport and emissive material. We analyzed the dielectric polarization of organic light emitting diodes using impedance. Impedance characteristics was measured complex impedance Z and phase ${\theta}$ in the frequency range of 40Hz to $10^8Hz$. We obtained dielectric constant and loss tangent (tan ${\delta}$) of the device. From these analyses, we are able to interpret a dielectric dispersion and dielectric absorption contributed by an interfacial and orientational polarization.

  • PDF

Areas associated with a Strictly Locally Convex Curve

  • Kim, Dong-Soo;Kim, Dong Seo;Kim, Young Ho;Bae, Hyun Seon
    • Kyungpook Mathematical Journal
    • /
    • 제56권2호
    • /
    • pp.583-595
    • /
    • 2016
  • Archimedes showed that for a point P on a parabola X and a chord AB of X parallel to the tangent of X at P, the area S of the region bounded by the parabola X and chord AB is four thirds of the area T of triangle ${\Delta}ABP$. It is well known that the area U formed by three tangents to a parabola is half of the area T of the triangle formed by joining their points of contact. Recently, the first and third authors of the present paper and others proved that among strictly locally convex curves in the plane ${\mathbb{R}}^2$, these two properties are characteristic ones of parabolas. In this article, in order to generalize the above mentioned property $S={\frac{4}{3}}T$ for parabolas we study strictly locally convex curves in the plane ${\mathbb{R}}^2$ satisfying $S={\lambda}T+{\nu}U$, where ${\lambda}$ and ${\nu}$ are some functions on the curves. As a result, we present two conditions which are necessary and sufficient for a strictly locally convex curve in the plane to be an open arc of a parabola.