• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.253-263
• /
• 2011

Mineralogical characteristics of garnierite ores from the Nakety, Kouaoua, and Ouaco Ni laterite deposits in New Caledonia are investigated using optical microscopy, powder X-ray diffractometer, and electron proble microanalyzer. Green garnierite ores have colloform, cellular, and boxwork texture, which are formed by precipitation under low temperature surface environment. They are mainly composed of Ni-bearing talc~willemseite series mineral and partly of lizardite. In Ni-bearing talc~willemseite series mineral, NiO contents are Ouaco (average 40.63%), Nakety (average 28.58%), and Kouaoua (average 24.90%), in descending order. Ni atomic percentage replacing Mg in octahedral site are 43.5~85.0%. Dark brown garnierite ores show cellular or boxwork texture, and consist of lizardite~Ni lizardite with some Ni-bearing talc~willemseite series mineral. Ni contents in lizardite~Ni lizardite are 1.14~4.06 wt. % and Ni atomic percentage replacing Mg in octahedral site 1.7~6.8%. Low NiO content in dark brown garnierite attributes to high Fe content replacing Mg in octahedral site.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.439-450
• /
• 2009

The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.40-48
• /
• 1980

This study was to investigate the feeding effects of diet supplemented with 2% ginseng powder on the growth rate and the blood glucose of rats. The Albino rats (48 heads), weighing 98 to 105g, were divided into two different diet groups, which were subdivided into six subgroups for insulin and epinephrine treatment. They were 1) Co group as control, 2) CG group as control group contained 2% ginseng powder, 3) Io group fed on the diet of Co group and treated with insulin, 4) IG group fed on the diet of CG group and treated with insulin, 5) Eo group fed on the diet of Co group and treated with epinephrine, and 6) EG group fed on the diet of CG group and treated with epinephrine. Each animal group was maintained with the corresponding diet for 27 days, and then they were sacrificed. The growth rate of rats and the diet consumption and efficiency ratio of food and protein were determined during the feeding period. After sacrificing of the animals, the weight of some organs and the blood glucose were analyzed. The results obtained are summarized as follows; 1. The gained body weights of the dietary group supplemented with 2% ginseng powder(CG) were less increased in comparison to the corresponding control group(Co). Those of IG were significantly higher than those of to (p<0.01). Those of EG were significantly lower than those of Eo group (p<0.01). 2. It was found that the variations of the efficiency ratio of food and protein showed the similarity in those of the growth of each group. 3. The final weights of liver kidney spleen. and heart were not significantly different between Co and CG. The weights of the liver, kidney, and heart of IG were significantly greater than those of Co (p<0.05). The weights of the liver and heart of EG were significantly lower than those of Eo(p<0.01) 4. The blood glucose of CG was a little higher than that of Co, but not significant. Also it was found that was little difference between IG and Io. It showed that the blood glucose of EG was significantly lower than that of Eo(p<0.0 1).

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.112-116
• /
• 2005

Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.538-541
• /
• 2009

Humans have a long history of asbestos use. There are reports from the Roman era, of asbestos victims among the slaves who worked in asbestos mines. The fact that asbestos can induce lung cancer and mesothelioma was verified epidemiologically in the 1960s. Asbestos related diseases are predominantly occupational in nature but can be caused by environmental exposure. Environmental mesothelioma is mainly associated with tremolite asbestos and this information comes from many countries including Turkey, Greece, Corsica, New Caledonia and Cyprus. In 1993, the first case of mesothelioma in Korea was reported in an asbestos textile worker. Recently, some asbestos disease victims who lived near an asbestos factory have their cases before the courts. A series of recent asbestos-related events in Korea, for example, the shocking revelation of asbestos containing talc in baby powders have caused the general public to become aware of the health risks of asbestos exposure. Asbestos related diseases are characterized by a long latency period, especially, mesothelioma which has no threshold of safety. Hence the best strategy for preventing asbestos related diseases is to decrease asbestos exposure levels to as low as possible.

• Elastomers and Composites
• /
• v.58 no.2
• /
• pp.87-94
• /
• 2023

Abrasion tests of an SBR compound were conducted using four different types of abrasion testers (cut and chip, Lambourn, DIN, and LAT100). The abrasion test results were analyzed in terms of size distributions and morphologies of the wear particles. Most wear particles were larger than 1000 ㎛. The wear particle size distributions tended to decrease as the particle size decreased. Except for the Lambourn abrasion test, the wear particles smaller than 212 ㎛ were rarely generated by the other three abrasion tests, implying that small wear particles were produced through friction by introducing talc powder. Shapes of the wear particles varied depending on the abrasion testers. The wear particles generated from the Lambourn abrasion tester had stick-like shapes. The cut and chip abrasion test showed a clear abrasion pattern, but the DIN abrasion test did not show any specific abrasion pattern. The Lambourn and LAT100 abrasion tests showed irregular abrasion patterns.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.2
• /
• pp.160-169
• /
• 2022

In the present study we evaluated the efficacy of a bioformulation of Streptomyces cameroonensis for control of black pod disease in cocoa and enhancement of seedling growth. The formulation developed using talc powder and cassava starch as carriers showed high shelf-life of 1.07 × 10⁶ CFU/g after six months storage at 4℃. The formulation was tested for inhibition of spore germination in Phytophthora megakarya and showed 100% inhibition at 10% (w/v) of formulation. To determine the efficacy of the formulation, we performed an in planta assay in the greenhouse on two hybrids of cocoa seedlings, the tolerant SNK413 × (♂) T79/467 and the susceptible UPA 134× (♂) SCA 12. Detached leaf assay showed a significant reduction in the disease severity index of about 67% for the tolerant hybrid and 55% for the susceptible hybrid compared to non-treated plants. A significant enhancement in stem length, leaf surface area and root weight was observed. Analysis of biochemical markers of defense showed a significant increase in total polyphenol, flavonoid, and total protein contents. There was also significant upregulation of PR-proteins such as chitinases, peroxidases and β-1, 3-glucanases following treatment of both tolerant and susceptible hybrids, though with a higher level of synthesis in the tolerant hybrids. A significant increase was also observed in polyphenol oxidase activities in plants treated with the formulation. This work demonstrated the stability and effectiveness of the S. cameroonensis powder formulation in suppressing black pod disease in cocoa and subsequently enhancing the growth of seedlings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.500-507
• /
• 2008

By Using various grinding mill in powder cosmetics manufacturing process; screen milt and pin mill, jet mill, properties of the powder and grinding mills were studied; talc, mica, nylon powder, silica, titanium dioxide. Besides, the experiments fur evaluation of grinding were performed by using iron oxides those are tracers. In powders of plate shape, they were grinded more vertically than horizontally at the screen mill and pin mill, although were all grinded vertically and horizontally at the jet mill. The spheric powders became the primary particles or aggregation by electrostatic interaction at the screen mill and pin mill. But, at the jet mill, they resulted the agglomeration or transformation or damage up to 2bar. Titanium dioxides became the primary particles by all grinding mill. Pin mill has an excellent result in experiments which is a change of the tone of color by grinding. From these results, suggest that the jet mill is used to pre-treat of powders of plate shape in practical cosmetic manufacturing process, and the screen mill and pin mill are used to match the color of powder cosmetics. If industrial process condition is taken into consideration, suggest that 4times of grinding is excellent on grinding effect by the screen mill, and twice grinding by the pin mill and grind air pressure of 1bar by the jet mill.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.187-196
• /
• 2020

In this study, we tried to reproduce some of the cosmetics from the Joseon period based on the previous analysis of the cosmetics excavated from the tomb of Princess Hwahyup. The two cosmetic powders, the white powder consisting of lead(II) carbonate and talc and the cinnabar-based red powder, were reproduced according to the records from the 6th to the 19th centuries. We also studied the degradation profiles of these reproduced samples by comparison of XRD patterns. Basic lead carbonate of the reproduced white powder turned into lead(II) carbonate, while the reproduced red powder showed different crystalline structure from the excavated cosmetics even after the degradation. Results of the evaluation tests showed that these reproduced cosmetics fell short of the standards set for the modern-day cosmetics, but based on their mixing ratio, the spreadability and oil absorption capacity of some samples of the reproduced white powder were found to be similar to those of the modern cosmetics.

• Archives of Pharmacal Research
• /
• v.26 no.7
• /
• pp.526-531
• /
• 2003

KR-31378 is a new drug candidate intended for the use in the prevention of ischemia-reperfusion damage. The objective of this preformulation study was to determine the physicochemical properties of KR-31378. The n-octanol to water partition coefficients of KR-31378 were 0.0504 at pH 3 and 0.8874 at pH 10. Accelerated stability of KR-31378 in solution and solid state was studied at 5, 40, $60^{\circ}C$. The stability testing indicated that the t90 for the drug in solid was estimated to be 2 years and 128.6 days at $25^{\circ}C$, while the that in aquesou solution was 68.6 days at $25^{\circ}C$. The KR-31378 was also found to be unstable under the relative humidity of 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of KR-31378 with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1:1 binary mixtures of KR-31378 and Aerosil, Avicel, Eudragit, lactose, PEG, talc, CMC, PVP, starch. As a result, CMC, PVP, and starch were found to be incompatible with KR-31378, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of KR-31378 powder was in the size range of 9-93 $\mu$ m with the mean particle size of 37.9 $\mu$ m. The flowability of KR-31378 was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Crystallization of the drug with a number of organic solvents did not lead a crystalline polymorphism. In addition, dissolution of the drug from the powder was adequately rapid at $37^{\circ}C$ in water.