• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.657-670
• /
• 2020

Due to the high compressive and tensile strength of ultra-high performance concrete (UHPC), UHPC used in steel concrete composite structures provided thinner concrete layer compared to ordinary concrete. This leaded to the headed stud shear connectors embedded in UHPC had a low aspect ratio. In order to systematic investigate the effect of headed stud with low aspect ratio on the structural behaviors of steel UHPC composite structure s this paper firstly carried out a test program consisted of twelve push out specimens. The effects of stud height, aspect ratio and reinforcement bars in UHPC on the structural behaviors of headed studs were investigated. The push out test results shows that the increasing of stud height did not obviously influence the structural behaviors of headed studs and the aspect ratio of 2.16 was proved enough to take full advantage of the headed stud strength. Based on the test results, the equation considering the contribution of weld collar was modified to predict the shear strength of headed stud embedded in UHPC. The modified equation could accurately predict the shear strength of headed stud by comparing with the experimental results. On the basis of push out test results, bending tests consisted of three steel UHPC composite slabs were conducted to investigate the effect of shear connection degree on the structural behaviors of composite slabs. The bending test results revealed that the shear connection degree had a significantly influence on the failure modes and ultimate resistance of composite slabs and composite slab with connection degree of 96% in s hear span exhibited a ductile failure accompanied by the tensile yield of steel plate and crushing of UHPC. Finally, analytical model based on the failure mode of composite slabs was proposed to predict the ultimate resistance of steel UHPC composite slabs with different shear connection degrees at the interface.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.315-319
• /
• 2022

Cloud computing has emerged to be the most effective headway for investigating crime especially cybercrime in this modern world. Even as we move towards an information technology-controlled world, it is important to note that when innovations are made, some negative implications also come with it, and an example of this is these criminal activities that involve technology, network devices, and networking that have emerged as a result of web improvements. These criminal activities are the ones that have been termed cybercrime. It is because of these increased criminal activities that organizations have come up with different strategies that they use to counter these crimes, and one of them is carrying out investigations using the cloud environment. A cloud environment has been defined as the use of web-based applications that are used for software installation and data stored in computers. This paper examines problems that are a result of cybercrime investigation in the cloud environment. Through analysis of the two components in play; cybercrime and cloud environment, we will be able to understand what are the problems that are encountered when carrying out investigations in cloud forensics. Through the use of secondary research, this paper found out that most problems are associated with technical and legal channels that are involved in carrying out these investigations. Investigator's mistakes when extracting pieces of evidence form the most crucial problems that take a lead when it comes to cybercrime investigation in the cloud environment. This paper not only flags out the challenges that are associated with cybercrime investigation in cloud environments but also offer recommendations and suggested solutions that can be used to counter the problems in question here. Through a proposed model to perform forensics investigations, this paper discusses new methodologies solutions, and developments for performing cybercrime investigations in the cloud environment.

• 한국사회복지학회:학술대회논문집
• /
• 한국사회복지학회 2004년도 춘계학술대회 자료집
• /
• pp.261-297
• /
• 2004

Social welfare facilities where provide the socially disadvantaged with proper social services, face financial difficulties. This is because not only of the lack of governmental support, but also of social welfare facilities' lack of skills in developing abundant resources from the private sector. In this context, this study tried to find factors affecting resource mobilization of the social welfare facilities to devise policies in resource development. Mail survey was conducted with the structured questionnaire. Employees in charge of community resource development were asked to answer the questionnaire. The study population were two types of welfare facilities: community welfare centers and residential care facilities. A total of 293 community welfare centers and 632 residential care facilities responded to the survey. The response rate was about 62%. The dependent variable of the study was the amount of resource mobilization in the year 2001 which was measured as the number of donors, the total amount of donation, and estimated amount of gift-in-kind. Three types models were constructed per each welfare facility. Independent variables were selected based on the previous research findings: community environment factor, structural factor, and resource development factor. Multiple regression was utilized to analyze the data. The resource development factor turned out to be significant variable in various models. In the models of donors, the amount of donation, and the amount of gift-in-kind, at least one out of four variables in the resource development factor was significant. Welfare centers which establish the resource development department or hire employees to take care of resource development, and adopt computer software in managing donors, receive more donations than their counterparts. Interestingly, the centers where employees take the responsibility of resource development as well as other responsibilities (dual duty), did not have more resources mobilized than those with no employees for resource development. Using computer software in managing donors turned out to be a significant variable in many models, except for the donor model. In addition, residential care facilities located in urban area have more donors and donations, and among residential facilities those for the elderly, children, and the mentally retarded and those hiring more employees, receive more donations than those for the disabled and those hiring less employees. As for the gift-in-kind model, the centers located in high income area and residential facilities for the elderly, women and mentally retarded receive less gift-in-kind than those for the disabled. Based on the above findings, this study suggested that to mobilize resources the welfare centers as well residential care facilities need to have community resource development department or resource development staffs, and adopt computer software to systematically organize donors.

• 한국한의학연구원논문집
• /
• 제5권1호
• /
• pp.27-53
• /
• 1999

The goal of this study is to review and define the role of nurses' who are engaged in Korea Oriental medical treatments in oriental medical hospitals. We think this study can contribute to the development of 'Korea Oriental medical science & nursing science' and 'Public health care'. A large portion of nurses's role in Korea Oriental Medicine(KOM. 한방/한의학) is assistance to doctors treatment. But besides of these role, we think there are many things that are riskless for nurses to do alone. But in present situation, few nurses in KOM. have enough knowledge to treat these medical treatments alone. So we believe this study will provide a way for nurses to participate more actively in KOM. public health care. With the goal of this study, we checked all medical treatments that have been practiced in oriental medical hospitals, and classified these treatments with some groups. And we organized a inquiry. At this inquiry, we ask 'What is the adequate role of nurses in Korea Oriental medical treatment? & What kind of treatment can nurses do?' We got 58 responses from nationwide 121 hospitals. From these response, more than half of them said nurses can do following medical treatment in the oriental medical hospital: 1. starting and ending part of following treatments; External treatments by instrument, by hydrotheraphy, by herb, by suction, moxibustion, Manipulative therapies on soft structure, Living and mind-body therapies. 2. pulling out Acupuncture. 3. boiling herb, judgement on dosing temperature, assisting in dosing, 4. assisting Diet, 5. operating from Living and mind-body therapies. 6. leading Physical training However, these results are coming out from present situation. So, after well-oriented instructions for nurses, this study will be need to carry out again. From this study, we suggest a desirable curriculum for students who study 'Korea Oriental Nursing Science.' That is to say, at basic course students take 4 subject for 6 credits. And at as an expert course, it should be dividend into Clinical Nursing Specialist in KOM., Self-care Nursing Specialist, Regimen Nursing Specialist and take 17 credits per each course.

• 전자공학회논문지SC
• /
• 제47권5호
• /
• pp.1-8
• /
• 2010

시장과 공장 환경 변화에 따라 생산관리의 용이성, 조작의 편리성, 높은 산업 안정성등의 요구가 본 논문에서는 네트워크기반의 시스템을 도입하여 단점을 보완한 새로운 고속, 초정밀 취출 로봇 제어기를 개발하였다. 개발된 제어기는 크게 티칭 팬던트와 중앙 서버 PC로 구분된다. 중앙 서버 PC는 관리자에게 전체 공정에 관련된 정보를 제공하게 된다. 티칭 팬던트는 중앙 서버 PC와 사출물 취출 로봇에 다리 역할로 사출로봇을 이용하는 사용자에게 제어 기능 및 사용자 인식, 금형파일 관리등 다양한 기능을 제공하게 된다. 사출물 취출을 위한 제어기 개발은 소프트웨어와 하드웨어 부분으로 나누어진다. 소프트웨어 개발은 3단계로 구분된다. 응용 프로그램과 유저 인터페이스 그리고 디바이스 드라이버로 구분되며, 간단한 디바이스 드라이버에는 따로 구분하지 않고 응용 프로그램에 포함되어 사용하도록 하였다. 하드웨어는 터치패널과 무선 네트워크를 도입하여 인터넷 접속 및 효율적인 공정 제어를 구축할 수 있도록 하였다. 기존의 시스템의 취출 싸이클이 5초였으나, 개선된 시스템을 도입하였을 경우 4초이내였으며, 다양한 무선 네트워크 기능으로 인한 공정 관리 및 생산 관리등 공정의 효율성을 높일 수 있었다.

• 의료법학
• /
• 제12권1호
• /
• pp.43-67
• /
• 2011

Humankind history is faced with one gigantic turning point due to development of Living genetically Modified Organisms. Food production by means of LMO is on the acceleration in an effort to solve the shortage of food problems. Food is also used as alternative energy source. Use of LMO product is not only limited to food and energy, but is actively utilized in various fields of medicines. This paper is first to check out the state of biomedicine developed and associated problems from industries that use LMO, after which we made an attempt on legislative approach to find out means of relief, through examples of such laws legislated for the sufferer from the adverse effect of the biomedicine. As for the liable subject to bear the responsibility for compensatory damage in a way of relieving the victim owing to adverse effect of biomedicine, those who manufactured and sold biomedicine and who are related to the damage to the victim due to the accident and medical doctors and pharmacists who prescribe and administer the medicine in question have been looked into. Accidents involving medicines and medical supplies could take place without reason for imputation on part of the liable subjects or fault of the victim, in which case the victim can't receive damage compensation from any of both parties. When such accidents happened turn out to be no fault accidents, introduction of damage relief measures might have to be reviewed against side effects of medicine and medical supplies as no fault compensation in order for actual relief to be possible. Talking about technicality of legislation, we can suggest a method of strengthening the accountability of manufacturer for stereotypical agenda on biomedicines by newly legislating special regulation with an issue that resists claim on risks associated with the development of medicine and incorporating the same into Manufactured Product Liability Law. After all, when an accident happens associated with biomedicine, the damage will be done to the consumer. And the consumer will be exposed to fatal danger even without the time to cope with potential risks associated with medicine and medical supplies they take. Therefore, it is necessary to protect the potential victim by having the manufacturer of biomedicines bear the liability of medical risks.

• 한국조리학회지
• /
• 제21권1호
• /
• pp.250-266
• /
• 2015

오늘날 실버세대는 독립된 소비세대로 사회 여러 분야에서 실버외식산업을 급성장시키는 세대이기도 하다. 본 연구에서는 새로운 소비의 주체세력으로 부상하고 있는 실버세대를 대상으로 실버세대에 대한 외식 소비행동에 따른 외식 선택속성과 식습관 변화를 살펴보고자 하였다. 서울에 거주하는 55세 이상의 실버 연령인 216명을 대상으로 하여 식습관 수준과 인구사회학적 특성에 따른 변인분석은 독립표본 t-검증과 F-검증을 실시하였으며, 실버세대의 식습관에 따른 소비태도와 외식소비행동 차이를 알아보기 위하여는 ${\chi}^2$검증을 실시하였다. 분석한 연구 결과를 요약하여 다음과 같은 결과를 얻었다. 첫째, 실버세대의 식습관 수준은 3점 만점에 평균 2.02점으로 나타나, 식습관이 어느 정도 양호함을 알 수 있었다. 둘째, 실버세대의 식습관에 따른 외식소비태도 차이를 분석한 결과, 식습관 태도가 비교적 양호한 사람들이 불량한 집단보다 물리적인 환경, 메뉴의 다양성, 업체의 품질과 서비스를 찾아서 외식업체를 선택하는 것으로 나타났다. 셋째, 실버세대의 식습관에 따른 외식소비행동 변화를 분석한 결과, 식습관 수준에 따른 외식업체 정보 출처와 외식업체 선택 선정기준 변수에 대해서만 집단 간 차이가 있는 것으로 나타났다.

• 사상체질의학회지
• /
• 제18권2호
• /
• pp.25-33
• /
• 2006

1. Objectives Recently there have been studied the trials to take out the characteristics of Sasangin's face. 3 dimensional modeling is essential to find out sasangin's face. So the studies of standard face model and face type are necessary. 2. Methods I have reviewed the researches of standard facial modeling and facial type in the inside and outside of the country. 3. Results and Conclusions The Facial Definition Parameters are a very complex set of parameters defined by MPEG-4. It has defineds set of 84 feature points and 68 Facial Animation Parameters. Face type has been researched to divide into male and female, or the westerns and the orientals, or sasangin(Taeyangin, Taeumin, Soyangin, Soeumin).

• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.164-170
• /
• 2013

Quadrotor UAV (Unmanned Aerial Vehicle) is a flying robotic platform which has drawn lots of attention in the recent years. The attraction comes from the fact that it is able to perform agile VTOL (Vertical Take-Off Landing) and hovering functions. In addition, the efficient modular structure composed of four electric rotors makes its design easier compared to other single-rotor type helicopters. In many cases, a quadrotor often utilizes vision systems in order to obtain altitude control and navigation solution in hostile environments where GPS receivers are not working or deniable. For carrying out their successful missions, it is essential for flight control systems to have fast and stable control responses of heading angle outputs. This paper presents a Fuzzy Logic based lateral PI controller to stabilize and control the quadrotor vehicle equipped with vision systems. The advantage of using the fuzzy based PI controller lies in the fact that it could acquire a desired output response of a heading angle even in presence of disturbances and uncertainties. The performance comparison of the newly proposed Fuzzy-PI controller and the conventional PI controller was carried out with various simulation results.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.107-118
• /
• 2014

PURPOSES : The purpose of study is to come up with ideas to improve both the use of the public bicycle and the practicality of the public bicycle system as well. METHODS : The study carried out an analysis on factors which would influence user's satisfaction by using a structural equation and then, discussed what the current public bicycle system should do to make improvements of its own. In order to Satisfaction of the public bicycle system("Tashu") in Daejeon city survey was conducted users and was based on statistical analysis SPSS 20 program, structural equation modeling program AMOS 20 was used for analysis. In addition, the reliability and validity of each question was conducted verification, to verify the hypothesis using structural equation model. RESULTS : According to the results of the analysis with the structural equation used, the connectivity, the convenience, the economic efficiency and the reliability in order were observed to have an influence on the satisfaction of the users CONCLUSIONS : The connectivity turned out to be a factor that would have the greatest concern with the satisfaction of the users. This finding was, therefore, interpreted that people who would ride the public bicycles understand them as more of a transit system that would take them, the people themselves, to another transfer rather than as some immediate transit system.