Due to the high compressive and tensile strength of ultra-high performance concrete (UHPC), UHPC used in steel concrete composite structures provided thinner concrete layer compared to ordinary concrete. This leaded to the headed stud shear connectors embedded in UHPC had a low aspect ratio. In order to systematic investigate the effect of headed stud with low aspect ratio on the structural behaviors of steel UHPC composite structure s this paper firstly carried out a test program consisted of twelve push out specimens. The effects of stud height, aspect ratio and reinforcement bars in UHPC on the structural behaviors of headed studs were investigated. The push out test results shows that the increasing of stud height did not obviously influence the structural behaviors of headed studs and the aspect ratio of 2.16 was proved enough to take full advantage of the headed stud strength. Based on the test results, the equation considering the contribution of weld collar was modified to predict the shear strength of headed stud embedded in UHPC. The modified equation could accurately predict the shear strength of headed stud by comparing with the experimental results. On the basis of push out test results, bending tests consisted of three steel UHPC composite slabs were conducted to investigate the effect of shear connection degree on the structural behaviors of composite slabs. The bending test results revealed that the shear connection degree had a significantly influence on the failure modes and ultimate resistance of composite slabs and composite slab with connection degree of 96% in s hear span exhibited a ductile failure accompanied by the tensile yield of steel plate and crushing of UHPC. Finally, analytical model based on the failure mode of composite slabs was proposed to predict the ultimate resistance of steel UHPC composite slabs with different shear connection degrees at the interface.
International Journal of Computer Science & Network Security
/
v.22
no.7
/
pp.315-319
/
2022
Cloud computing has emerged to be the most effective headway for investigating crime especially cybercrime in this modern world. Even as we move towards an information technology-controlled world, it is important to note that when innovations are made, some negative implications also come with it, and an example of this is these criminal activities that involve technology, network devices, and networking that have emerged as a result of web improvements. These criminal activities are the ones that have been termed cybercrime. It is because of these increased criminal activities that organizations have come up with different strategies that they use to counter these crimes, and one of them is carrying out investigations using the cloud environment. A cloud environment has been defined as the use of web-based applications that are used for software installation and data stored in computers. This paper examines problems that are a result of cybercrime investigation in the cloud environment. Through analysis of the two components in play; cybercrime and cloud environment, we will be able to understand what are the problems that are encountered when carrying out investigations in cloud forensics. Through the use of secondary research, this paper found out that most problems are associated with technical and legal channels that are involved in carrying out these investigations. Investigator's mistakes when extracting pieces of evidence form the most crucial problems that take a lead when it comes to cybercrime investigation in the cloud environment. This paper not only flags out the challenges that are associated with cybercrime investigation in cloud environments but also offer recommendations and suggested solutions that can be used to counter the problems in question here. Through a proposed model to perform forensics investigations, this paper discusses new methodologies solutions, and developments for performing cybercrime investigations in the cloud environment.
Social welfare facilities where provide the socially disadvantaged with proper social services, face financial difficulties. This is because not only of the lack of governmental support, but also of social welfare facilities' lack of skills in developing abundant resources from the private sector. In this context, this study tried to find factors affecting resource mobilization of the social welfare facilities to devise policies in resource development. Mail survey was conducted with the structured questionnaire. Employees in charge of community resource development were asked to answer the questionnaire. The study population were two types of welfare facilities: community welfare centers and residential care facilities. A total of 293 community welfare centers and 632 residential care facilities responded to the survey. The response rate was about 62%. The dependent variable of the study was the amount of resource mobilization in the year 2001 which was measured as the number of donors, the total amount of donation, and estimated amount of gift-in-kind. Three types models were constructed per each welfare facility. Independent variables were selected based on the previous research findings: community environment factor, structural factor, and resource development factor. Multiple regression was utilized to analyze the data. The resource development factor turned out to be significant variable in various models. In the models of donors, the amount of donation, and the amount of gift-in-kind, at least one out of four variables in the resource development factor was significant. Welfare centers which establish the resource development department or hire employees to take care of resource development, and adopt computer software in managing donors, receive more donations than their counterparts. Interestingly, the centers where employees take the responsibility of resource development as well as other responsibilities (dual duty), did not have more resources mobilized than those with no employees for resource development. Using computer software in managing donors turned out to be a significant variable in many models, except for the donor model. In addition, residential care facilities located in urban area have more donors and donations, and among residential facilities those for the elderly, children, and the mentally retarded and those hiring more employees, receive more donations than those for the disabled and those hiring less employees. As for the gift-in-kind model, the centers located in high income area and residential facilities for the elderly, women and mentally retarded receive less gift-in-kind than those for the disabled. Based on the above findings, this study suggested that to mobilize resources the welfare centers as well residential care facilities need to have community resource development department or resource development staffs, and adopt computer software to systematically organize donors.
The goal of this study is to review and define the role of nurses' who are engaged in Korea Oriental medical treatments in oriental medical hospitals. We think this study can contribute to the development of 'Korea Oriental medical science & nursing science' and 'Public health care'. A large portion of nurses's role in Korea Oriental Medicine(KOM. 한방/한의학) is assistance to doctors treatment. But besides of these role, we think there are many things that are riskless for nurses to do alone. But in present situation, few nurses in KOM. have enough knowledge to treat these medical treatments alone. So we believe this study will provide a way for nurses to participate more actively in KOM. public health care. With the goal of this study, we checked all medical treatments that have been practiced in oriental medical hospitals, and classified these treatments with some groups. And we organized a inquiry. At this inquiry, we ask 'What is the adequate role of nurses in Korea Oriental medical treatment? & What kind of treatment can nurses do?' We got 58 responses from nationwide 121 hospitals. From these response, more than half of them said nurses can do following medical treatment in the oriental medical hospital: 1. starting and ending part of following treatments; External treatments by instrument, by hydrotheraphy, by herb, by suction, moxibustion, Manipulative therapies on soft structure, Living and mind-body therapies. 2. pulling out Acupuncture. 3. boiling herb, judgement on dosing temperature, assisting in dosing, 4. assisting Diet, 5. operating from Living and mind-body therapies. 6. leading Physical training However, these results are coming out from present situation. So, after well-oriented instructions for nurses, this study will be need to carry out again. From this study, we suggest a desirable curriculum for students who study 'Korea Oriental Nursing Science.' That is to say, at basic course students take 4 subject for 6 credits. And at as an expert course, it should be dividend into Clinical Nursing Specialist in KOM., Self-care Nursing Specialist, Regimen Nursing Specialist and take 17 credits per each course.
Journal of the Institute of Electronics Engineers of Korea SC
/
v.47
no.5
/
pp.1-8
/
2010
Clients require easy to use of product and operating and industry safety according to the change of a market and a factory. For overcoming it, this paper developed controller of take-out robots that take high speed and superprecision and supplement a week point as use the system based on network. development controller classify teaching pendant and center server PC. Center server PC service the information about all process to supervisor. Teaching pendant is the bridge that service various faculties such as control, user recognition, metallic pattern operation to the user using injection molding. The controller development for taking out injection molded body classify software and hardware. The development of software is divided into three step which is application program, user interface and device driver. the simple device driver is not classified and included in application program. The hardware induce the touch panel and wireless network and construct the effective process control and internet connection. The inject ion cycle of existing system was five second but advanced system has the inner four cycle, process efficiency and product operation through wireless network.
Humankind history is faced with one gigantic turning point due to development of Living genetically Modified Organisms. Food production by means of LMO is on the acceleration in an effort to solve the shortage of food problems. Food is also used as alternative energy source. Use of LMO product is not only limited to food and energy, but is actively utilized in various fields of medicines. This paper is first to check out the state of biomedicine developed and associated problems from industries that use LMO, after which we made an attempt on legislative approach to find out means of relief, through examples of such laws legislated for the sufferer from the adverse effect of the biomedicine. As for the liable subject to bear the responsibility for compensatory damage in a way of relieving the victim owing to adverse effect of biomedicine, those who manufactured and sold biomedicine and who are related to the damage to the victim due to the accident and medical doctors and pharmacists who prescribe and administer the medicine in question have been looked into. Accidents involving medicines and medical supplies could take place without reason for imputation on part of the liable subjects or fault of the victim, in which case the victim can't receive damage compensation from any of both parties. When such accidents happened turn out to be no fault accidents, introduction of damage relief measures might have to be reviewed against side effects of medicine and medical supplies as no fault compensation in order for actual relief to be possible. Talking about technicality of legislation, we can suggest a method of strengthening the accountability of manufacturer for stereotypical agenda on biomedicines by newly legislating special regulation with an issue that resists claim on risks associated with the development of medicine and incorporating the same into Manufactured Product Liability Law. After all, when an accident happens associated with biomedicine, the damage will be done to the consumer. And the consumer will be exposed to fatal danger even without the time to cope with potential risks associated with medicine and medical supplies they take. Therefore, it is necessary to protect the potential victim by having the manufacturer of biomedicines bear the liability of medical risks.
This study concentrated on the dining out consumption behaviors, dining out selection attributes, and changes in eating habits of silver generation. Total 216 residents in metropolitan area were employed for statistical analysing. The results are as follows. First, as the result of t-test and ANOVA showed that female and higher academic background tended to regularly take high level of fruits, vegetables, meat, and fish eating habits. These results identified that dining out culture and dietary lifestyle are closely linked. Second, as the result of difference in dining out consumption attitudes on eating habit of silver generation, consumers who have better eating behaviors tended to consider the physical environment, variety of menu, and service quality when they choose a restaurant. Third, as the result of analysis on changes in dining out consumption behavior based on eating behavior of silver consumers, groups differences were found from only the source for information on dining out business and standard variable in selection of dining out business. Fourth, physical environment, variety of menu, business quality, and service were indicated as significant selection attributes of dining out among silver peoples. Fifth, dining out consumption behaviors of silver consumers were developed through newspapers, magazines, and previous visiting experiences. In conclusion, the results of present study showed that silver consumers tend to select a restaurant based on word-of-mouth and various factors related to experiences. Hence, various promotional activities are necessary for the business succession.
1. Objectives Recently there have been studied the trials to take out the characteristics of Sasangin's face. 3 dimensional modeling is essential to find out sasangin's face. So the studies of standard face model and face type are necessary. 2. Methods I have reviewed the researches of standard facial modeling and facial type in the inside and outside of the country. 3. Results and Conclusions The Facial Definition Parameters are a very complex set of parameters defined by MPEG-4. It has defineds set of 84 feature points and 68 Facial Animation Parameters. Face type has been researched to divide into male and female, or the westerns and the orientals, or sasangin(Taeyangin, Taeumin, Soyangin, Soeumin).
Journal of Institute of Control, Robotics and Systems
/
v.19
no.2
/
pp.164-170
/
2013
Quadrotor UAV (Unmanned Aerial Vehicle) is a flying robotic platform which has drawn lots of attention in the recent years. The attraction comes from the fact that it is able to perform agile VTOL (Vertical Take-Off Landing) and hovering functions. In addition, the efficient modular structure composed of four electric rotors makes its design easier compared to other single-rotor type helicopters. In many cases, a quadrotor often utilizes vision systems in order to obtain altitude control and navigation solution in hostile environments where GPS receivers are not working or deniable. For carrying out their successful missions, it is essential for flight control systems to have fast and stable control responses of heading angle outputs. This paper presents a Fuzzy Logic based lateral PI controller to stabilize and control the quadrotor vehicle equipped with vision systems. The advantage of using the fuzzy based PI controller lies in the fact that it could acquire a desired output response of a heading angle even in presence of disturbances and uncertainties. The performance comparison of the newly proposed Fuzzy-PI controller and the conventional PI controller was carried out with various simulation results.
PURPOSES : The purpose of study is to come up with ideas to improve both the use of the public bicycle and the practicality of the public bicycle system as well. METHODS : The study carried out an analysis on factors which would influence user's satisfaction by using a structural equation and then, discussed what the current public bicycle system should do to make improvements of its own. In order to Satisfaction of the public bicycle system("Tashu") in Daejeon city survey was conducted users and was based on statistical analysis SPSS 20 program, structural equation modeling program AMOS 20 was used for analysis. In addition, the reliability and validity of each question was conducted verification, to verify the hypothesis using structural equation model. RESULTS : According to the results of the analysis with the structural equation used, the connectivity, the convenience, the economic efficiency and the reliability in order were observed to have an influence on the satisfaction of the users CONCLUSIONS : The connectivity turned out to be a factor that would have the greatest concern with the satisfaction of the users. This finding was, therefore, interpreted that people who would ride the public bicycles understand them as more of a transit system that would take them, the people themselves, to another transfer rather than as some immediate transit system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.