• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.78-85
• /
• 2016

While most AUV researches have concerned about single hydrofoil, practical AUV's are generally operated with multiple hydrofoils. Double hydrofoil study attempts to evaluate thrust and efficiency with various flapping motions, and carries out design optimization using parametric analysis. Flow patterns such as vortex shedding and wake-body interaction are carefully investigated during design variable sensitivity analysis. The purpose of this design optimization is to find out the optimal motion that yields maximum thrust and efficiency. The design optimization employes several techniques such as table of orthogonal arrays, Kriging method, ANOVA analysis and MGA. Throughout this research, it is possible to find the optimal values of heaving ratio, heaving shift and pitch shift: Heaving ratio 0.950, heaving shift $23.120^{\circ}$ and pitch shift $89.991^{\circ}$ are found to be optimal values in double hydrofoil motions. Thrust and efficiency are 16.7% and 35.1% higher than existing AUV that did not consider nonlinear dependency of motion parameters. This results may offer an effective framework that is applicable to various AUV motion analyses and designs.

• 대한치과기공학회지
• /
• 제37권1호
• /
• pp.9-15
• /
• 2015

Purpose: The purpose of this study was to compare the accuracy of the maxillary three-unit fixed dental prosthesis (FDPs) made using two CAD/CAM milling machines : DCM Group(Dentaim CAD/CAM milling machine), WCM Group(Wieland CAD/CAM milling machine). Methods: Each of 10 duplicate models was scanned by blue light scanner(Identica, Medit, Korea), and the three-unit FDPs (STL file) was designed using DelcamCAD. A total of 20 three-unit FDPs was fabricated, comprising 2 groups of 10 specimens each (shrinkage ratio is 1:1). The first three-unit FDPs STL file was used as a CAD reference model (CRM). Obtained STL files by scanning the inner surface of three-unit FDPs were convened into the point clouds-ASC II files. Discrepancies between the point clouds and CRM were measured by superimposition software. Statistical methods to analyze the data were used non-parametric method. The mean (SD) values were compared by a Mann-Whitney U-test. Type one error rate was set at 0.05. Results: WCM group had small discrepancies with $2.17{\mu}m$ of mean value compared to $4.44{\mu}m$ in DCM group. The accuracy values between the two groups showed a sratistically significant difference (Table 2, p<.05). Conclusion: The accuracy of the three-unit fixed dental prosthesis(FDPs) made of two CAD/CAM milling machines were statistically different. Accuracy with which the prosthesis made of WCM group was superior.

• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.69-89
• /
• 2019

사질토를 지나 풍화암에 4D 소켓된 매입 PHC말뚝에 대한 매개변수 수치해석 자료를 분석하여 지지력 표해 및 도해(I)이 제안된 바 있다(Choi et al., 2019a). 본 논문에서는 이를 활용하여 직경의 5% 침하량에서 발현되는 동원지지력을 산정할 수 있는 새로운 산정공식을 제안하였다. 제안식은 두 가지이며, 그 중에서 EQ-G1 제안식은 각각의 상대근입길이(L/D)에서 말뚝직경과 ${\bar{N}}$값(보정 N 값)을 고려하여 각 지지력 성분을 평가하며, 검증 결과는 다음과 같다. RQP는 약 71~94%로 나타났으며, 이는 일반 설계에서 사용하고 있는 지지력 산정공식으로 구한 SRF(26~37%)보다 큰 값을 나타냈다. RQP는 적정 설계의 범위로 분포하였는데, 4개 사례에서는 78, 136, 142, 180%로 나타났다. D_E는 β₁에 따라 달라질 수는 있는데, 본 연구에서는 0.85로 가정하였으므로 D_E는 약 85%로 나타났다. 따라서 본 연구에서 제안한 EQ-G1 제안식을 사용하여 PHC말뚝 몸체의 허용압축하중(P_all)까지 활용할 수 있는 적정설계를 수행할 수 있는 것으로 판단된다. 그리고 EQ-G2-3 제안식은 D, ${\bar{N}}$ 및 L/D를 동시에 고려하여 지지력 성분들을 평가할 수 있으며, 매입 PHC말뚝에서 지반의 압축지지력 산정 시 근사해법으로 활용할 수 있다.