• Title/Summary/Keyword: tRF

Search Result 726, Processing Time 0.028 seconds

A Highly Miniaturized Active 90 Power Combiner for Application to MMIC (MMIC 응용을 위한 초소형 능동형 90 전력 결합기)

  • Park, Young-Bae;Yun, Young
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.9
    • /
    • pp.1064-1069
    • /
    • 2007
  • This paper proposes the highly miniaturized active $90^{\circ} power combiner for application to MMIC. Conventional passive $90^{\circ} power combiners can't be integrated on MMIC because of their very larger size. Therefore, the highly miniaturized $90^{\circ} power combiners are required for a development of highly integrated MMIC. For this paper, the highly miniaturized active $90^{\circ} power combiner employing InGaP/GaAs HBT was fabricated on GaAs substrate for application to highly integrated MMIC. A size of fabricated active $90^{\circ} power combiner was $2.42{\times}1.05$ mm, which was 2.2 % of conventional passive $90^{\circ} power combiner. The fabricated active $90^{\circ} power combiner showed a gain characteristic about 10 dB and a good phase-difference coupling characteristic of $-92.6^{\circ} than conventional passive $90^{\circ} power combiner at 2.4 GHz. The highly miniaturized active $90^{\circ} power combiner exhibited good RF performances comparable to conventional passive $90^{\circ} power combiners. This work is the first report of an active $90^{\circ} power combiner.

The Influence of $O_2$ Partial Pressure on Soft Magnetic Properties of As-deposited Fe-Sm-O Thin Films (산소분압에 따른 Fe-Sm-O계 박막의 연자기적 성질)

  • Yoon, T.S.;Cho, W.S.;Koo, E.S.;Li, Ying;Park, J.B.;Kim, C.O.
    • Korean Journal of Materials Research
    • /
    • v.10 no.11
    • /
    • pp.755-759
    • /
    • 2000
  • The influence of $O_2$partial presure on saturation magnetization, coercivity and effective permeability(0.5~100MHz) of as-deposited Fe-Sm-O thin films, which were fabricated by RF magnetron reactive sputtering method, were investigated. The nanocrystalline Fe(sub)83.4Sm(sub)3.4O(sub)13.2 thin film fabricated at $O_2$partial pressure of 5% exhibits the best magnetic softness with saturation magnetization of 18kG, coercivity of 0.82 Oe and effective permeability about 2,600 at 0.5~100MHz. $\alpha$-Fe grain size is decreased with increasing $O_2$partial pressure. In case of $O_2$partial pressure of 10%, it is observed that FeO compound is formed and soft magnetic properties are decreased. The electrical resistivity of Fe-Sm-O thin films were increased with increasing $O_2$partial pressure, the electrical resistivity of Fe(sub)83.4Sm(sub)3.4O(sub)13.2 thin film with the best soft magnetic properties was 130 $\mu$$\Omega$cm. Therefore, It is assumed that the good soft magnetic properties of Fe(sub)83.4Sm(sub)3.4O(sub)13.2 thin film results from high electrical resistivity and decreasing $\alpha$-Fe grain size due to precipitation of Sm-Oxide phase.

  • PDF

Development of 1.0 Tesla Compact MRI System (1.0 Tesla 자기 공명 진단 장치의 개발)

  • Lee, H.K.;Oh, C.H.;Ahn, C.B.;Chang, Y.H.;Shin, D.W.;Lee, K.N.;Jang, K.H.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1996 no.11
    • /
    • pp.129-134
    • /
    • 1996
  • 1차 년도 G-7 개발 과제로 수행된 자기 공명 진단 장치 (Magnetic Resonance Imaging System)의 개발 내용을 간략히 소개하였다. 성공적인 IT Compact 자기 공명 진단 장치의 완성을 위해 일차적으로 (1)RF (고주파), Gradient(경사 자계), Spectrometer 등의 Hard-ware 관련 MRI 핵심부분, (2) RF, Gradient, Spectrometer, Magnet 등의 각 Sub-system을 연결, 조합, 조정하여 하나의 체계적인 시스템으로 통합하고 운영하는 과정(System Integration), (3)사용자와 시스템을 연결하는 User Interface, Data Base Management, Real time 운영 SW 등과 (4)임상에 적용하여 구체적인 성능과 효용성을 확인하는 기술 등에 대하여 집중 연구하였다. 개발 방법은 (1)지난 16년간 국내에 축적 된 연구 개발 인력들을 최대한 활용하고 (2)연구 개발을 국제화 시켜 필요한 경우 부분별로 개발 인력을 해외에서 보완하고 (3)소수 정예 전문 인력 주의와 요소 기술 또는 중요 부품을 경쟁성 검토 후 필요 시 Out-sourcing 활용으로 최저의 비용으로 개발 기간을 최소화 하는 데 두었다. 개발된 1.0Tesla자기 공명 영상 장치는 미국 물리 학회에서 규격화한 Phantom및 임상 적용을 통하여 서울대 의대 연구 팀과 지속적으로 성능을 평가해 왔다. 개발된 시스템의 해상도는 $256{\times}256$ head 영상에서 1mm 이 하의 해상도를 가짐을 resolution phantom 을 통하여 확인할 수 있었고, $512{\times}512$ 영상에서 는 약 0.5 mm 의 물체를 분리 해냄으로써 외제 시스템들 보다 우수하게 평가 되었다. 차폐 경사코일의 Eddy current영향은2%이내로 촬영 시 영향은 거의 무시할 수 있었다. 또한, 개발된 영상 기법들, 즉 Multislice/Multi Echo, Oblique angle imaging, 64 Echo train을 갖는 고속 촬영 기술들이 자기 공명 장치에 장착되어 임상 적용에 문제가 없도록 하였다. 또한 20mT/m/Amp의 강력한 능동 차폐 경사 자계 코일(Active Shield Gradient Coil)을 기본 사양으로 하고, 수신단을 최대 6개로 확장토록 하여 2차년도의 초고속 촬영 기법(EPI) 및 Phased Array 코일 촬영이 가능토록 하였다. 1차 년도 개발 과제 수행 결과와 향후 개발 과제를 바탕으로 최종 목표인 국제 경쟁력이 있는 자기 공명 진단 장치 즉 기능과 영상의 질은 선진국 제품과 동일하거나 우수하되, 저가격을 구현한 상용화 제품이 완성되어, 첨단 의료기기로서 산업 구조 고도화에 기여하고 수입대체 뿐만 아니 라 수출을 통한 국익 창출과 국가의 기술을 통한 위상 제고에 기여되길 기대한다.

  • PDF

Study on Water Quality Predictability through Machine Learning Techniques in Non-point Pollutant Management Area (비점오염원관리지역의 머신러닝 기법을 통한 수질 예측 가능성 연구)

  • Yeong Na Yu;Min Hwan Shin;Dong Hyuk Kum;Kyoung Jae Lim;Jong Gun Kim
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.467-467
    • /
    • 2023
  • 강우에 의해 발생하는 비점오염물질의 수질 데이터가 충분하지 않아 비점오염원이 문제가 되고 있는 유역의 수질개선을 위한 대책마련이 어려운 실정이다. 기존에 환경부에서 운영하고 있는 자동측정망은 1시간 간격으로 데이터를 축적하고 있으나, 비점오염원이 문제가 되는 유역에 설치되어 있지 않거나 수온, DO, pH 등 현장항목만을 측정하고 있어 하천의 수질오염을 대표할 수 있는 T-P나 SS 등의 수질분석 항목의 부재하다. 이로인해 유역의 수질개선 대책을 수립하기 위한 오염원의 현황을 파악하기 어려운 실정이다. 따라서, 본 연구에서는 비점오염원관리지역 중 골지천 유역을 대상으로 수질항목별 상관성을 분석하고, 실측자료를 기반으로 DT, MLP, SVM, RF, GB, XGB 등의 머신러닝 기법을 통해 수질 예측 가능성을 연구하였다. 상관관계 분석결과 입력변수인 탁도 항목이 예측 수질과 뚜렷한 상관관계를 보이는 것으로 나타났으나, 그 외 항목에서는 약한 상관관계를 보이거나 상관관계가 없는 것으로 나타났다. 머신러닝 기법을 활용한 수질 예측 분석 결과, 검무교와 태봉2교, 제1여량교는 RF 기법에서 결정계수(R2) 0.57~0.86, RMSE 16.49~175.60으로 예측성이 우수한 것으로 나타났다. 관말교는 SVM 기법에서 R2 0.65, RMSE 57.69로, 송계교는 XGB 기법에서 R2 0.74, RMSE 282.86으로 가장 예측성이 우수한 것으로 나타났다. 분석결과와 같이 머신러닝 기법을 활용한 수질 예측은 가능하나, 예측성이 우수한 머신러닝 기법의 R2 비교 결과, 유역면적이 큰 제1여량교와 작은 관말교에서 0.57과 0.65로 다른 지점에 비해 낮은 것으로 나타났다. RMSE 비교 결과, 상류 산간지역에 발생한 국지성 호우의 영향으로 흙탕물이 가장 자주 발생하는 태봉2교 지점과 우선관리지역이 합류되는 송계교 지점에서 175.60과 282.86으로 예측값과 실측값의 오차가 큰 것으로 나타났다. 연구결과와 같이 하천 수질을 예측하기 위해서는 유역면적 혹은 유역특성과 관련한 기초자료를 추가로 적용하여 머신러닝 기법을 적용 해야할 것으로 판단된다. 또한, 본 연구에서 예측한 수질 항목 이외에 입력변수를 추가로 확보하여 수질의 예측 가능성을 검토해야 할 것으로 보여진다.

  • PDF

Predicting Forest Gross Primary Production Using Machine Learning Algorithms (머신러닝 기법의 산림 총일차생산성 예측 모델 비교)

  • Lee, Bora;Jang, Keunchang;Kim, Eunsook;Kang, Minseok;Chun, Jung-Hwa;Lim, Jong-Hwan
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.21 no.1
    • /
    • pp.29-41
    • /
    • 2019
  • Terrestrial Gross Primary Production (GPP) is the largest global carbon flux, and forest ecosystems are important because of the ability to store much more significant amounts of carbon than other terrestrial ecosystems. There have been several attempts to estimate GPP using mechanism-based models. However, mechanism-based models including biological, chemical, and physical processes are limited due to a lack of flexibility in predicting non-stationary ecological processes, which are caused by a local and global change. Instead mechanism-free methods are strongly recommended to estimate nonlinear dynamics that occur in nature like GPP. Therefore, we used the mechanism-free machine learning techniques to estimate the daily GPP. In this study, support vector machine (SVM), random forest (RF) and artificial neural network (ANN) were used and compared with the traditional multiple linear regression model (LM). MODIS products and meteorological parameters from eddy covariance data were employed to train the machine learning and LM models from 2006 to 2013. GPP prediction models were compared with daily GPP from eddy covariance measurement in a deciduous forest in South Korea in 2014 and 2015. Statistical analysis including correlation coefficient (R), root mean square error (RMSE) and mean squared error (MSE) were used to evaluate the performance of models. In general, the models from machine-learning algorithms (R = 0.85 - 0.93, MSE = 1.00 - 2.05, p < 0.001) showed better performance than linear regression model (R = 0.82 - 0.92, MSE = 1.24 - 2.45, p < 0.001). These results provide insight into high predictability and the possibility of expansion through the use of the mechanism-free machine-learning models and remote sensing for predicting non-stationary ecological processes such as seasonal GPP.

Advanced Design of Birdcage RF Coil for Various Absorption Regions at 3T MRI System

  • Lee, Jung-Woo;Choe, Bo-Young;Choi, Chi-Bong;Huh, Soon-Nyoung
    • Journal of the Korean Magnetic Resonance Society
    • /
    • v.9 no.1
    • /
    • pp.48-60
    • /
    • 2005
  • Purpose: The purpose of this study was to design and build an optimized birdcage resonator configuration with a low pass filter, which would facilitate the acquisition of high-resolution 3D-image of small animals at 3T MRI system. Methods and Materials: The birdcage resonator with 12-element structures was built, in order to ensure B1 homogeneity over the image volume and maximum filling factor, and hence to maximize the signal to noise ratio (SNR) and resolution of the 3-dimensional images. The diameter and length of each element of a birdcage resonator were as follows: (1) diameter 13 cm, length 22 cm, (2) diameter 15 cm, length 22 cm, (3) diameter 17 cm, length 25 cm. Spin echo pulse sequence and fast spin echo pulse sequence were employed in obtaining MR images. The quality of the manufactured birdcage resonators wes evaluated on the basis of the return loss following matching and tuning process. Results: The experimental MR image of phantoms by the various manufactured birdcage resonators were obtained to compare the SNR in accordance with the size of objects. The size of an object to that of coil was identified by parameters that were estimated from the image of a phantom. First, the diameter of the birdcage resonator was 15cm, and the ratio of the tangerine to the birdcage resonator accounted for approximately 27%. The Q factor was 53.2 and the SNR was 150.7. Second, at the same birdcage resonator, the ratio of the orange was approximately 53%. The SNR and the Q parameter was 212.8 and 91.2, respectively. Conclusion: The present study demonstrated that if birdcage resonators have the same forms, SNR could be different depending on the size of an object, especially when the size of an object to that of coil is approximately 40~80%, the former is bigger than the latter. Therefore, when the size of an object to be observed is smaller than that of coil, the coil should be manufactured in accordance with the size of an object in order to obtain much more excellent images.

  • PDF

Polymorphisms of interleukin-1β promoter in simple febrile seizures (단순 열성 경련에서 interleukin-1β promoter 유전자의 다형성)

  • Yoon, Jang Won;Choen, Eun Jung;Lee, Young Hyuk
    • Clinical and Experimental Pediatrics
    • /
    • v.51 no.9
    • /
    • pp.1007-1011
    • /
    • 2008
  • Purpose : Febrile seizure (FS) is the most common type of seizure. The role of genetic factors in FSs has long been recognized. A positive family history can be elicited in 25-40% of patients with FSs; nonetheless, the genes responsible for FSs in the majority of the population remain unknown. Interleukin-$1{\beta}$ ($IL-1{\beta}$) is a pro-inflammatory cytokine that acts as an endogenous pyrogen. Thus, $IL-1{\beta}$ could be involved in the pathophysiology of FSs. Methods : To determine whether or not single nucleotide polymorphisms of the $IL-1{\beta}$ gene are associated with susceptibility to simple FSs, $IL-1{\beta}$ promoter -31 and -511 genotyping was performed by means of polymerase chain reaction-restriction fragment (PCR-RF) length polymorphism in 40 FS patients (20 sporadic and 20 familial FS patients) and 33 controls. Results : There were no significant differences in the frequencies of -31 C/T and -511 C/T in the $IL-1{\beta}$ promoter gene, between simple FS patients and controls. Conclusion : The frequency of CT/CT increased relatively in familial FS patients. A study examining a larger number of FS patients is needed.

Study on Design of Advanced Smart Postural Change Device for Supine Posture Control (와상체위제어를 위한 스마트 고기능 자세변환기의 설계에 관한 연구)

  • Park, Seung Hwan;Jung, Jin Taek;Sim, Woo Jung;Kim, Yung Sear
    • 재활복지
    • /
    • v.18 no.4
    • /
    • pp.221-235
    • /
    • 2014
  • Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.

Comparative Study on Immuno-Enhancing Effects of Red Ginseng Fractions (홍삼의 분획에 따른 면역활성 비교)

  • Hyun, Sun Hee;Kim, Eun Sun;Lee, Sang Min;Kyung, Jong Soo;Lee, Sang Myung;Lee, Jong Won;Kim, Mee Ree;Hong, Jin Tae;Kim, Young Sook
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.11
    • /
    • pp.1665-1673
    • /
    • 2014
  • The objective of this study was to compare the compositions and immuno-enhancing effects of 6-year-old red ginseng powder (RGP) with those of its fractions. RGP was subjected to extraction with 100% ethanol to obtain an ethanol fraction (E) and residue 1 (R1). Then, R1 was subjected to extraction with distilled water to obtain water fraction (W) and residue 2 (R2). Chemical compositions were as follows: 4.94% acidic polysaccharides and 1.56% ginsenosides (amounts of Rg1, Re, Rf, Rg2, Rb1, Rc, Rd, and Rg3) in RGP, 0.11% acidic polysaccharides and 6.99% ginsenosides in E, 4.93% acidic polysaccharides and 0.40% ginsenosides in R1, 0.50% acidic polysaccharides and 0.30% ginsenosides in R2, and 7.46% acidic polysaccharides and 0.61% ginsenosides in W. Immuno-enhancing effects of fractions from RGP were examined based on suppression of immune responses by cyclophosphamide. In the first fraction test, the antibody response to SRBCs increased significantly in the R1-treated group, but not the E-treated group. In the second fraction test, W showed higher immuno-enhancing effect than R1 and R2. W, which contained the highest amount of acidic polysaccharides, restored numbers of T and B cells, macrophages, as well as $CD4^+$ and $CD8^+$ T cells in the spleen suppressed by cyclophosphamide. These results suggest that acidic polysaccharides from red ginseng may be more effective than saponin in enhancing immune functions and reducing immunotoxicity of cyclophosphamide.

Quantitative Analysis of Magnetization Transfer by Phase Sensitive Method in Knee Disorder (무릎 이상에 대한 자화전이 위상감각에 의한 정량분석법)

  • Yoon, Moon-Hyun;Sung, Mi-Sook;Yin, Chang-Sik;Lee, Heung-Kyu;Choe, Bo-Young
    • Investigative Magnetic Resonance Imaging
    • /
    • v.10 no.2
    • /
    • pp.98-107
    • /
    • 2006
  • Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

  • PDF