• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2010

The purpose of the study was to evaluate the influence of landscaping pavements on WBGT(Wet-Bulb Globe Temperature) of outdoor spaces that lack ventilation and shade at summer midday. The relative humidity(RH), dry-bulb temperature(DT) and globe temperature(GT) were recorded every minute from June to October 2009 at a height of 1.2m above ten experimental beds with different pavements, by a measuring system consisting of an electric humidity sensor(GHM-15), resistance temperature detector(RTD, Pt-100), standard black globe(${\phi} 150mm$) and data acquisition systems(National Instrument's Labview and Compact FieldPoint). Additionally, the surface dry-bulb temperatures also were recorded and compared. The area of each experimental bed was 1.5m(W)${\times}$2.0m(L) and ten different kinds of pavement were used including grass, grass+cubic stone, grass+porous brick, brick, stone panels, cubic stone, interlocking blocks, clay brick, naked soil, gravel and concrete. To prevent interference from ventilation, a 1.5m height cubic steel frame was established around each bed and each vertical side of the frame was covered with transparent polyethylene film. Based on the records of the hottest period from noon to 3 PM on 26 days with a peak dry-bulb temperature over $30^{\circ}C$ at natural condition, the wet-bulb temperature(WT) and WBGT were calculated and compared. The major findings were as follows: 1. The average surface DT was $40.1^{\circ}C$, which is $9^{\circ}C$ higher than that of the natural condition. The surface DT of the pavements with grass were higher than those of concrete and interlocking block. The peak DT of the surface almost every pavement rose to above $50^{\circ}C$ during the hottest time. 2. The averages of DT, WT and GT were $40.1^{\circ}C$, $27.5^{\circ}C$ and $49.1^{\circ}C$, and the peak values rose to $48.1^{\circ}C$, $45.8^{\circ}C$ and $59.5^{\circ}C$, respectively. In spite of slight differences that resulted according to pavements, no coherent differentiating factor could be found. 3. The average WBGT of grass was the highest at $34.3^{\circ}C$ while the others were similar in the range of around $33{\pm}1^{\circ}C$. Meanwhile, the peak WBGT was highest with stone panel at $47.9^{\circ}C$. Though there were some differences according to pavements, and while grass seemed to be worst in terms of WBGT, it seems difficult to say ablolutely that grass was the worst because the measurement was conducted without ventilation and shade during summer daytime hours only, which had temperatures that rose to a dangerous degree(above $45^{\circ}C$ WBGT), withering the grass during the hottest period. The average WBGT resulted also showed that the thermal environment of the pavement without ventilation and shade were at an intolerable level for humans regardless of the pavement type. In summary, the results of this study show that ventilation and shade are more important factor than pavement type in terms of outdoor thermal comfort in summer daylight hours.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.1-9
• /
• 2018

The purpose of this study was to identify differences of perceptions for gardens and parks between experts and the general public concerning several aspects including scope, scale, publicity, artistic and scientific nature, main materials, practicality and aesthetics, executive and management systems as well as legal understanding of garden and park. The properties of garden and park were derived through literature research, and the concept, similarity, and difference of gardens and the parks were recognized by the experts and the public viewpoint was clarified by questionnaire. As for the difference in the scope of the gardens and the parks, the expert group recognized it more widely than the general public. In general, the space recognized as a garden was the rooftop green space, and urban forests were recognized as a park. In addition, the general public recognized urban forests as gardens the same as they recognized parks, and the distinction was unclear. In the expert group, the perception that gardens were small and the parks were large was more prevalent. It was generally recognized that gardens were private spaces and the parks were public spaces. In the expert group, the gardens were more personal and the parks were more apparent to the public. In the general population, functional and scientific aspects rather than artistic creativity in both gardens and parks. In addition, both the general public and experts found that parks are more complex than gardens. The garden was centered on plant material, and the park was recognized as a center where the sculptural facilities were centered, or the plant material and the sculptural facilities were properly balanced. To the experts the view of the gardens was positive. Expert groups emphasized the aesthetics of the garden, and the parks were more practical, and the general population showed similar perceptions of utility and aesthetics when comparing gardens and parks. In addition, the utility of gardens in the general publics is more emphasized than the aesthetics of the park. Regarding the executive system the park was recognized as the public sector, and the difference was larger in the expert group. As for the management system, both experts and the general public perceive the management of the park or the garden to be carried out by the supporting organization, and it is necessary to discuss the diversification of the management subject. It is found that there is a certain difference in recognition with the mixture of concepts, and there is still a big difference in legal system and perception.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.2
• /
• pp.20-33
• /
• 2020

This study aims to examine the trends in the preservation of urban public parks with a focus on the international movement to acknowledge and preserve the heritage value of urban parks. First, the background in which the concept of "historic urban park" first appeared internationally, as well as the current situation were investigated. Then, the cases of the United Kingdom (UK), the United States (US), and Japan, all of which are already preserving and managing urban public parks, were analyzed. In the ICOMOS-IFLA Document on Historic Urban Public Parks, the International Council on Monuments and Sites (ICOMOS), which is a group of specialists dedicated to the conservation and management of cultural heritage, mentions that it is necessary to maintain the social, intangible, aesthetic, ecological, and civic values of historic urban public parks. In addition, according to ICOMOS, it is necessary to preserve elements of parks, such as space composition, topography, light, and environment. The UK, the USA, and Japan have their own unique characteristics for the background of preserving urban parks, the preservation system, the selection of parks to be preserved, and the elements to be preserved within the park. The UK has categorized parks into certain types from each period and has tried to preserve the common elements in each type. The US has selected the parks to preserve by determining the meaning of the parks itself considering multiple aspects, embracing not only the physical form of the parks, but also the culture, monumentality, and social values. Recently, Japan began the preservation of historic urban parks as a matter of policy and started to implement a preservation policy by investigating modern parks that are believed to be worth preserving. Specialists in cultural heritage preservation have argued that the method of preservation of historic urban parks must differ from that of other parks or gardens. Nonetheless, observing cases in these three countries showed that, regardless of their administrative and legal systems regarding cultural heritage and urban public parks, their policies were still limited to preserving only the physical elements of parks. The direction and methodology for the preservation of historic urban parks must be developed further and elaborated upon in terms of the evolving concept and definition of heritage. Urban parks are where various historic values are accumulated, connoting historical meanings dealing with the memories of the parks and the urban dwellers. This study found that, worldwide, park management has been carried out in a way that the historic values of parks are respected and preserved. This global trend in preserving the historic values of urban public parks has significant implications for the management of urban public parks in Korea that are being formed and renewed repeatedly.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.10 no.1
• /
• pp.109-140
• /
• 2006

Background: In practicing qigong, People must achieve three Points : adjust their Posture, control their breathing and have a peace of mind. That is, Cho-Sin [調身] , Cho-Sik [調息] , Cho-Sim [調心] . Slow respiration is the important pattern of respiration to improve the human health. However, unsuitable breathing training have been occurred to mental disorder such as insomnia, anorexia etc. So, we think that the breathing training to consider the individual variations are desired. Objectives: We performed this study to examine the physiological effects of controlled respiration on the normal range of frequency domain electroencephalogram(EEC) in healthy subjects Also, to study examine individual variations according to the physiological effects between controlled respiration and Han-Yeol [寒熱] , respiration period, gender and age-related groups on the EEC in healthy subjects. Methods: When the subjects controlled the time of breathing (inspiration and expiration time) consciously, compared with natural respiration, and that their physiological phenomena are measured by EEC. In this research we used breathing time as in a qigong training (The Six-Word Excise) and observed physiological phenomena of the controlled natural respiration period with the ratio of seven to three(longer inspiration) and three to seven(longer expiration) . We determined, heat-cold score by Han-Yeol [寒熱] questionnaire, average of natural respiration period, according to decade, EEC of 140 healthy subjects (14 to 68 years old; 38 males, 102 females) by means of alpha, beta spectral relative power. Results: 1) In Controlled respiration compared with the natural respiration, ${\alpha}\;I\;(Fp2)\;and\;{\beta}$ I (Fpl, Fp2, F3, F4) decreased on the EEC. 2) In controlled respiration compared with the natural respiration, ${\beta}$ I (Fpl, Fp2, F3, F4) increased with cold group, ${\alpha}/{\beta}$(F3) decreased with heat group, ${\alpha}$ I (Fp2)increased with cold group in longer inspiration. But by means of compound effects, ${\alpha}$ II(F3) increased with cold group in longer inspiration, the other side ${\alpha}$ I (F3) decreased with heat group in controlled respiration on the EEC. 3) In controlled respiration compared with the natural respiration, ${\alpha}$ I (Fp2) decreased with decreased-respiratory-rate(D.R.R.) group, ${\beta}$ I (Fpl, Fp2, F3, F4) increased with D.R.R. and D.R.R. groups, ${\alpha}/{\beta}$(F3) decreased with D.R.R. group. But by means of compound effects, in controlled respiration compared with the natural respiration, ${\alpha}/{\beta}$(F3) decreased with D.R.R. group on the EEG. 4) In controlled respiration compared with the natural respiration, ${\beta}$ I (Fpl, F3, F4) increased with female cup, ${\beta}$ I (Fp2) increased with male and female groups, ${\alpha}/{\beta}$(F3) decreased with male group. But by means of compound effects, in controlled respiration compared with the natural respiration, ${\alpha}$ I (Fp2) increased with female group on the EEC. 5) Compared with the natural respiration, in longer expiration ${\alpha}$ I (Fp2) increased in their forties group, in longer inspiration ${\alpha}$ I (Fp2) increased in their fifties group. But by means of compound effects, in controlled respiration compared with the natural respiration, ${\beta}$ I (Fpl) decreased in teens group on the EEG.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2017

Communications for mobile sink groups such as rescue teams or platoons bring about a new challenging issue for handling mobility in wireless sensor networks. To do this, many studies have been proposed to support mobile sink groups. When closely looking at mobile sink groups, they can be divided into (multiple) small groups according to the property of applications. For example, a platoon can be divided into multiple squads to carry out its mission in the battle field. However, the previous studies cannot efficiently support the division of mobile sink groups because they do not address three challenging issues engendered by the mobile sink group division. The first issue is to select a leader sink for a new small mobile sink group. The efficient data delivery from a source to small mobile sink groups is the second issue. Last, the third issue is to share data between leader sinks of small mobile sink groups. Thus, this paper proposes a routing protocol to efficiently support the division of mobile sink groups by solving the three challenging issues. For the first issue, the proposed protocol selects a leader sink of a new small mobile sink group which provide a minimum summation of the distance between the new leader sink and the previous leader sink and the distance from the new leader sink to all of its member sinks. For the efficient data delivery from a source to small mobile sink groups in the second issue, the proposed protocol determines the path to minimize the data dissemination distance from source to small mobile sink group by calculating with the location information of both the source and the leader sinks. With regard to the third issue, the proposed protocol exploits member sinks located among leader sinks to provide efficient data sharing among leaders sinks by considering the location information of member sinks. Simulation results verified that the proposed protocol is superior to the previous protocol in terms of the energy consumption.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.183-194
• /
• 2004

The existing management job of research expenses has been divided into three parts： budget planning, budget draw-up, and exact settlement of budget. However, it caused some problems. Under this current circumstance it is required to obtain research expenses steadily, to operate efficiently and to use them clearly to solve such problems. As a result of a study on data warehouse development process of existing system integration company (Inmon, IBM) to reflect current trend described above, data warehouse development process of Inmon uses systematic and gradual access as a classical development cycle method. It causes overlap and feedback to the previous step in the process of each step Is requested. And another problem that it is difficult to toil what function refers and corrects data because functions and data are separated during performing development process at data warehouse development process of IBM is caused. Integrated management data warehouse development process of research expenses in the enterprise environment which applies UML at planning and analysis step, design step and implement and test step is suggested in this paper. Information retrieval agent uses existing budget plan DB, budget draw-up DB and budget settlement DB to find out information that a user wants to know. Information retrieval agent collects and saves information at integration database and information integration agent extracts, transports, transforms and loads the data. Information integration agent reduces a user's efforts to access to a number of information sources and check each of them. It also screens out data that a user may not need. As a result, integrated management data warehouse development process of research expenses in the enterprise environment reflects a user's requirements as much as possible and provides various types of information to make a decision which is needed to establish the policy of research expense management. It helps an end user approach his/her desired analysis information quickly and get various data from the comprehensive viewpoint rather than the fragmentary viewpoint. Furthermore, as it integrated three systems into one, it is possible to share data, to integrate the system, to reduce operating expenses and to simplify supporting environment for the decision making.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.166-177
• /
• 2006

The cache size tends to grow in the embedded processor as technology scales to smaller transistors and lower supply voltages. However, larger cache size demands more energy. Accordingly, the ratio of the cache energy consumption to the total processor energy is growing. Many cache energy schemes have been proposed for reducing the cache energy consumption. However, these previous schemes are concerned with one side for reducing the cache energy consumption, dynamic cache energy only, or static cache energy only. In this paper, we propose a hybrid scheme for reducing dynamic and static cache energy, simultaneously. for this hybrid scheme, we adopt two existing techniques to reduce static cache energy consumption, drowsy cache technique, and to reduce dynamic cache energy consumption, way-prediction technique. Additionally, we propose a early wake-up technique based on program counter to reduce penalty caused by applying drowsy cache technique. We focus on level 1 data cache. The hybrid scheme can reduce static and dynamic cache energy consumption simultaneously, furthermore our early wake-up scheme can reduce extra program execution cycles caused by applying the hybrid scheme.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.117-128
• /
• 2003

Software usability is a characteristic of the software that is decided based on learnability, effectiveness, and satisfaction when it is evaluated. The usability is a main factor of the software quality. A software has to be continuously improved by taking guidelines that comes from the usability evaluation. Usability factors may vary among the different software products and even for the same factor, the users may have different opinions according to their experience and knowledge. Therefore, a usability evaluation process must be developed with the consideration of many factors like various applications and users. Existing systems such as satisfaction evaluation and performance evaluation only evaluate the result and do not perform cause analysis. And also unified evaluation items and contents do not reflect the characteristics of the products. To address these problems, this paper presents a evaluation model that is based on the mental model of user and the problems, this paper presents a evaluation model that is based on the mental model of user and the emotion of users. This model uses evaluation factors of the user task which are extracted by analyzing usage of the target product. In the mental model approach, the conceptual model of designer and the mental model of the user are compared and the differences are taken as a gap also reported as a part to be improved in the future. In the emotional factor approach, the emotional factors are extracted for the target products and evaluated in terms of the emotional factors. With this proposed method, we can evaluate the software products with customized attributes of the products and deduce the guidelines for the future improvements. We also takes the GUI framework as a sample case and extracts the directions for improvement. As this model analyzes tasks of users and uses evaluation factors for each task, it is capable of not only reflecting the characteristics of the product, but exactly identifying the items that should be modified and improved.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.307-317
• /
• 2002

In this paper we propose a new mesh reconstruction scheme that produces a displaced subdivision surface directly from unorganized points. The displaced subdivision surface is a new mesh representation that defines a detailed mesh with a displacement map over a smooth domain surface, but original displaced subdivision surface algorithm needs an explicit polygonal mesh since it is not a mesh reconstruction algorithm but a mesh conversion (remeshing) algorithm. The main idea of our approach is that we sample surface detail from unorganized points without any topological information. For this, we predict a virtual triangular face from unorganized points for each sampling ray from a parameteric domain surface. Direct displaced subdivision surface reconstruction from unorganized points has much importance since the output of this algorithm has several important properties: It has compact mesh representation since most vertices can be represented by only a scalar value. Underlying structure of it is piecewise regular so it ran be easily transformed into a multiresolution mesh. Smoothness after mesh deformation is automatically preserved. We avoid time-consuming global energy optimization by employing the input data dependant mesh smoothing, so we can get a good quality displaced subdivision surface quickly.