• 청정기술
• /
• 제30권1호
• /
• pp.37-46
• /
• 2024

전 세계적으로 플라스틱 폐기물로 인한 환경문제가 지속적으로 제기되었으며, 코로나19 이후 플라스틱 폐기물은 급증하는 추세이다. 특히 PP와 PE는 전체 플라스틱 생산량의 절반 이상을 차지하며 두 소재의 폐기물량은 심각한 수준이다. 이에 따라 국내외적으로 플라스틱 재자원화를 위한 연구가 지속적으로 수행되고 있으며, 그중 열분해 기술은 한가지 대안이 될 수 있다. 본 연구에서는 PP와 PE의 열분해 생성 기체에 대한 화학 반응론적 거동을 예측하고자 비응축성 기체의 열분해 거동에 관한 수치해석 연구를 수행하였다. 기존의 열분해 문헌 조사를 통해 얻은 다양한 조성의 탄화수소 화학종을 기반으로 온도와 체류시간에 따라 생성물의 거동을 분석하였다. 수치해석 결과, 온도 및 체류시간이 증가함에 따라 비응축성 기체의 전환을 통해 H₂와 고분자 탄화수소의 생성이 증가하였고 동시에 CH₄와 C₆H₆ 화학종은 감소하여 반응에 참여하는 것을 알 수 있었다. 또한 생성률 분석을 통해 C₂H₄의 분해 반응이 H₂ 생성에 지배적인 반응임을 확인하였고, C₂H₄의 함량이 PP 대비 많은 PE에서 C₂H₄의 분해 반응을 통해 H₂ 생성량이 증가하는 경향을 나타냈다. 향후 수치해석 결과에서 도출된 여러 변수를 통해 플라스틱에서 H₂ 및 탄소의 전환율을 높이는 방법을 실험적으로 확인할 계획이다.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.65-83
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Journal of Preventive Medicine and Public Health
• /
• 제16권1호
• /
• pp.135-152
• /
• 1983

Emergency medical service is an important part of the health care delivery system, and the optimal allocation of resources and their efficient utilization are essentially demanded. Since these conditions are the prerequisite to prompt treatment which, in turn, will be crucial for life saving and in reducing the undesirable sequelae of the event. This study, taking the hyperbaric chamber for carbon monoxide poisoning as an example, is to develop a stochastic approach for solving the problems of optimal allocation of such emergency medical facility in Korea. The hyperbaric chamber, in Korea, is used almost exclusively for the treatment of acute carbon monoxide poisoning, most of which occur at home, since the coal briquette is used as domestic fuel by 69.6 per cent of the Korean population. The annual incidence rate of the comatous and fatal carbon monoxide poisoning is estimated at 45.5 per 10,000 of coal briquette-using population. It offers a serious public health problem and occupies a large portion of the emergency outpatients, especially in the winter season. The requirement of hyperbaric chambers can be calculated by setting the level of the annual queueing rate, which is here defined as the proportion of the annual number of the queued patients among the annual number of the total patients. The rate is determined by the size of the coal briquette-using population which generate a certain number of carbon monoxide poisoning patients in terms of the annual incidence rate, and the number of hyperbaric chambers per hospital to which the patients are sent, assuming that there is no referral of the patients among hospitals. The queueing occurs due to the conflicting events of the 'arrival' of the patients and the 'service' of the hyperbaric chambers. Here, we can assume that the length of the service time of hyperbaric chambers is fixed at sixty minutes, and the service discipline is based on 'first come, first served'. The arrival pattern of the carbon monoxide poisoning is relatively unique, because it usually occurs while the people are in bed. Diurnal variation of the carbon monoxide poisoning can hardly be formulated mathematically, so empirical cumulative distribution of the probability of the hourly arrival of the patients was used for Monte Carlo simulation to calculate the probability of queueing by the number of the patients per day, for the cases of one, two or three hyperbaric chambers assumed to be available per hospital. Incidence of the carbon monoxide poisoning also has strong seasonal variation, because of the four distinctive seasons in Korea. So the number of the patients per day could not be assumed to be distributed according to the Poisson distribution. Testing the fitness of various distributions of rare event, it turned out to be that the daily distribution of the carbon monoxide poisoning fits well to the Polya-Eggenberger distribution. With this model, we could forecast the number of the poisonings per day by the size of the coal-briquette using population. By combining the probability of queueing by the number of patients per day, and the probability of the number of patients per day in a year, we can estimate the number of the queued patients and the number of the patients in a year by the number of hyperbaric chamber per hospital and by the size of coal briquette-using population. Setting 5 per cent as the annual queueing rate, the required number of hyperbaric chambers was calculated for each province and for the whole country, in the cases of 25, 50, 75 and 100 per cent of the treatment rate which stand for the rate of the patients treated by hyperbaric chamber among the patients who are to be treated. Findings of the study were as follows. 1. Probability of the number of patients per day follows Polya-Eggenberger distribution. $$P(X=\gamma)=\frac{\Pi\limits_{k=1}^\gamma[m+(K-1)\times10.86]}{\gamma!}\times11.86^{-{(\frac{m}{10.86}+\gamma)}}$$ when$${\gamma}=1,2,...,n$$$$P(X=0)=11.86^{-(m/10.86)}$$ when $${\gamma}=0$$ Hourly arrival pattern of the patients turned out to be bimodal, the large peak was observed in $7 : 00{\sim}8 : 00$ a.m., and the small peak in $11 : 00{\sim}12 : 00$ p.m. 2. In the cases of only one or two hyperbaric chambers installed per hospital, the annual queueing rate will be at the level of more than 5 per cent. Only in case of three chambers, however, the rate will reach 5 per cent when the average number of the patients per day is 0.481. 3. According to the results above, a hospital equipped with three hyperbaric chambers will be able to serve 166,485, 83,242, 55,495 and 41,620 of population, when the treatmet rate are 25, 50, 75 and 100 per cent. 4. The required number of hyperbaric chambers are estimated at 483, 963, 1,441 and 1,923 when the treatment rate are taken as 25, 50, 75 and 100 per cent. Therefore, the shortage are respectively turned out to be 312, 791. 1,270 and 1,752. The author believes that the methodology developed in this study will also be applicable to the problems of resource allocation for the other kinds of the emergency medical facilities.

• 지능정보연구
• /
• 제27권1호
• /
• pp.191-207
• /
• 2021

오늘날 이동통신은 급증하는 데이터 수요에 대응하기 위해서 주로 속도 향상에 초점을 맞추어 발전해 왔다. 그리고 5G 시대가 시작되면서 IoT, V2X, 로봇, 인공지능, 증강 가상현실, 스마트시티 등을 비롯하여 다양한 서비스를 고객들에게 제공하기위한 노력들이 진행되고 있고 이는 우리의 삶의 터전과 산업 전반에 대한 환경을 바꿀 것으로 예상되고 되고 있다. 이러한 서비스를 제공하기위해서 고속 데이터 속도 외에도, 실시간 서비스를 위한 지연 감소 그리고 신뢰도 등이 매우 중요한데 5G에서는 최대 속도 20Gbps, 지연 1ms, 연결 기기 106/㎢를 제공함으로써 서비스 제공할 수 있는 기반을 마련하였다. 하지만 5G는 고주파 대역인 3.5Ghz, 28Ghz의 높은 주파수를 사용함으로써 높은 직진성의 빠른 속도를 제공할 수 있으나, 짧은 파장을 가지고 있어 도달할 수 있는 거리가 짧고, 회절 각도가 작아서 건물 등을 투과하지 못해 실내 이용에서 제약이 따른다. 따라서 기존의 통신망으로 이러한 제약을 벗어나기가 어렵고, 기반 구조인 중앙 집중식 SDN 또한 많은 노드와의 통신으로 인해 처리 능력에 과도한 부하가 발생하기 때문에 지연에 민감한 서비스 제공에 어려움이 있다. 그래서 자율 주행 중 긴급 상황이 발생할 경우 사용 가능한 지연 관련 트리 구조의 제어 기능이 필요하다. 이러한 시나리오에서 차량 내 정보를 처리하는 네트워크 아키텍처는 지연의 주요 변수이다. 일반적인 중앙 집중 구조의 SDN에서는 원하는 지연 수준을 충족하기가 어렵기 때문에 정보 처리를 위한 SDN의 최적 크기에 대한 연구가 이루어져야 한다. 그러므로 SDN이 일정 규모로 분리하여 새로운 형태의 망을 구성 해야하며 이러한 새로운 형태의 망 구조는 동적으로 변하는 트래픽에 효율적으로 대응하고 높은 품질의 유연성 있는 서비스를 제공할 수 있다. 이러한 SDN 구조 망에서 정보의 변경 주기, RTD(Round Trip Delay), SDN의 데이터 처리 시간은 지연과 매우 밀접한 상관관계를 가진다. 이 중 RDT는 속도는 충분하고 지연은 1ms 이하이기에 유의미한 영향을 주는 요인은 아니지만 정보 변경 주기와 SDN의 데이터 처리 시간은 지연에 크게 영향을 주는 요인이다. 특히, 5G의 다양한 응용분야 중에서 지연과 신뢰도가 가장 중요한 분야인 지능형 교통 시스템과 연계된 자율주행 환경의 응급상황에서는 정보 전송은 매우 짧은 시간 안에 전송 및 처리돼야 하는 상황이기때문에 지연이라는 요인이 매우 민감하게 작용하는 조건의 대표적인 사례라고 볼 수 있다. 본 논문에서는 자율 주행 시 응급상황에서 SDN 아키텍처를 연구하고, 정보 흐름(셀 반경, 차량의 속도 및 SDN의 데이터 처리 시간의 변화)에 따라 차량이 관련정보를 요청해야 할 셀 계층과의 상관관계에 대하여 시뮬레이션을 통하여 분석을 진행하였다.

• 한국문헌정보학회지
• /
• 제4권
• /
• pp.43-71
• /
• 1975

Operations research has developed rapidly since its origins in World War II. Practitioners of O. R. have contributed to almost every aspect of government and business. More recently, a number of operations researchers have turned their attention to library and information systems, and the author believes that significant research has resulted. It is the purpose of this essay to introduce the library audience to some of these accomplishments, to present some of the author's hypotheses on the subject of library management to which he belives O. R. has great potential, and to suggest some future research directions. Some problem areas in librianship where O. R. may play a part have been discussed and are summarized below. (1) Library location. It is usually necessary to make balance between accessibility and cost In location problems. Many mathematical methods are available for identifying the optimal locations once the balance between these two criteria has been decided. The major difficulties lie in relating cost to size and in taking future change into account when discriminating possible solutions. (2) Planning new facilities. Standard approaches to using mathematical models for simple investment decisions are well established. If the problem is one of choosing the most economical way of achieving a certain objective, one may compare th althenatives by using one of the discounted cash flow techniques. In other situations it may be necessary to use of cost-benefit approach. (3) Allocating library resources. In order to allocate the resources to best advantage the librarian needs to know how the effectiveness of the services he offers depends on the way he puts his resources. The O. R. approach to the problems is to construct a model representing effectiveness as a mathematical function of levels of different inputs(e.g., numbers of people in different jobs, acquisitions of different types, physical resources). (4) Long term planning. Resource allocation problems are generally concerned with up to one and a half years ahead. The longer term certainly offers both greater freedom of action and greater uncertainty. Thus it is difficult to generalize about long term planning problems. In other fields, however, O. R. has made a significant contribution to long range planning and it is likely to have one to make in librarianship as well. (5) Public relations. It is generally accepted that actual and potential users are too ignorant both of the range of library services provided and of how to make use of them. How should services be brought to the attention of potential users? The answer seems to lie in obtaining empirical evidence by controlled experiments in which a group of libraries participated. (6) Acquisition policy. In comparing alternative policies for acquisition of materials one needs to know the implications of each service which depends on the stock. Second is the relative importance to be ascribed to each service for each class of user. By reducing the level of the first, formal models will allow the librarian to concentrate his attention upon the value judgements which will be necessary for the second. (7) Loan policy. The approach to choosing between loan policies is much the same as the previous approach. (8) Manpower planning. For large library systems one should consider constructing models which will permit the skills necessary in the future with predictions of the skills that will be available, so as to allow informed decisions. (9) Management information system for libraries. A great deal of data can be available in libraries as a by-product of all recording activities. It is particularly tempting when procedures are computerized to make summary statistics available as a management information system. The values of information to particular decisions that may have to be taken future is best assessed in terms of a model of the relevant problem. (10) Management gaming. One of the most common uses of a management game is as a means of developing staff's to take decisions. The value of such exercises depends upon the validity of the computerized model. If the model were sufficiently simple to take the form of a mathematical equation, decision-makers would probably able to learn adequately from a graph. More complex situations require simulation models. (11) Diagnostics tools. Libraries are sufficiently complex systems that it would be useful to have available simple means of telling whether performance could be regarded as satisfactory which, if it could not, would also provide pointers to what was wrong. (12) Data banks. It would appear to be worth considering establishing a bank for certain types of data. It certain items on questionnaires were to take a standard form, a greater pool of data would de available for various analysis. (13) Effectiveness measures. The meaning of a library performance measure is not readily interpreted. Each measure must itself be assessed in relation to the corresponding measures for earlier periods of time and a standard measure that may be a corresponding measure in another library, the 'norm', the 'best practice', or user expectations.

• 한국의학물리학회지:의학물리
• /
• 제23권3호
• /
• pp.145-153
• /
• 2012

본 연구에서는 호흡에 의한 표적의 움직임 모사가 가능한 팬톰을 이용, 나선형 4DCT 영상에서 발생되는 위상 내 모션 아티팩트(residual motion artifact)의 경향을 분석했으며, 그 특성 및 원인 분석을 위한 이론적 모델을 제시하였다. 표적의 움직임은 SI 방향의 1차원 사인파형을 적용하였으며, 주기는 4s로 고정, 진폭은 10, 20, 30 mm로 변화를 주었다. 표적의 움직임과 동조를 이루는 호흡신호를 얻은 후 이를 기반으로 최대흡기(Inhale peak, 0%)로부터 10% 위상간격(phase bin)으로 재분류하여 총 10개의 4DCT 영상을 재구성하였다. 각각의 진폭(10, 20, 30 mm)별로 획득된 총 30 사례의 영상은 RTP 시스템(CorePLAN, SC&J)에서 분석을 수행하였으며, 경계설정 시 오류를 줄이기 위해 contour window를 고정 값으로 설정한 후 SI 방향의 표적 지름변화를 측정하여 왜곡 정도를 평가 하였다. 각 위상 별 표적의 지름 변화를 측정한 결과 일정한 변화 경향을 확인할 수 있었다. 3 사례(10, 20, 30 mm) 모두 50% 위상(phase) 영상에서 비교적 작은 지름 변화가 관찰 되었는데 10 mm 진폭에서는 정지 영상 대비 변화가 없었고, 20 mm 진폭에서는 0.1 cm (5%)의 변화, 30 mm 진폭에서는 0.1 cm (5%) 변화를 확인할 수 있었다. 반면 30% 위상(phase) 또는 80% 위상 영상에서는 다른 위상 영상에 비해 표적 지름의 변화가 비교적 크게 나타남을 확인할 수 있었다. 10 mm 진폭에서는 정지 영상대비 최대 0.2 cm (10%) 지름 변화가 나타났고 20 mm 진폭에서는 최대 0.7 cm (35%)의 변화, 30 mm 진폭에서는 최대 0.9 cm (45%)의 지름 변화가 나타났다. 이상의 실측결과를 이론모델의 시뮬레이션 결과와 비교해 봤을 때 변화의 양적인 측면에서는 다소 차이가 발생되었지만 변화의 경향성을 확인하는 측면에서는 의미 있는 결과를 얻을 수 있었다. 본 연구의 결과를 통해 규칙적인 1차원 표적 움직임(sine motion)이 적용된 나선형 4DCT 영상에서도 위상 내 움직임에 의한 표적 지름변화가 발생될 수 있음을 확인했고 각 위상(phase)에서의 영상왜곡 정도가 위상 내 움직임의 속도에 비례함을 증명할 수 있었다. 또한 이상의 실측 결과를 이론모델에 적용하여 분석함으로써 위상 내 모션 아티팩트(residual motion artifact)의 발생원인 및 경향성 분석에 직관적 이해를 도울 수 있었고 이론모델에 기초한 분석 프로그램을 개발하여 특정 CT 파라미터(parameter) 상에서 영상왜곡을 줄이기 위한 최적의 위상(phase) 선택에 도움을 줄 수 있었다.

• 대한전자공학회논문지SD
• /
• 제47권9호
• /
• pp.14-23
• /
• 2010

본 논문에서는 유럽에서 사용되는 이동형 디지털 방송인 DVB-T/H 신호를 수신 및 신호처리 가능한 DVB-T/H SiP를 제작하였다. DVB-T/H SiP는 칩이 PCB 내부에 삽입될 수 있는 IC-임베디드 PCB 공정을 적용하여 설계되었다. DVB-T/H SiP에 삽입된 DVB-T/H IC는 신호를 수신하는 RF 칩과 어플리케이션 프로세서에서 활용할 수 있도록 수신된 신호를 변환하는 디지털 칩 2개를 원칩화한 모바일 TV용 SoC 이다. SiP 에는 DVB-T/H IC를 동작하기 위해 클럭소스로써 38.4MHz의 크리스탈을 이용하고, 전원공급을 위해 3MHz로 동작하는 DC-DC Converter와 LDO를 사용하였다. 제작된 DVB-T/H SiP는 $8mm{\times}8mm$ 의 4 Layer로 구성되었으며, IC-임베디드 PCB 기술을 사용하여 DVB-T/H IC는 2층과 3층에 배치시켰다. 시뮬레이션 결과 Ground Plane과 비아의 확보로 RF 신호선의 감도가 개선되었으며 SiP로 제작하는 경우에 Power 전달선에 존재하는 캐패시터와 인덕터의 조정이 필수적임을 확인하였다. 제작된 DVB-T/H SiP의 전력 소모는 평균 297mW이며 전력 효율은 87%로써 기존 모듈과 동등한 수준으로 구현되었고, 크기는 기존 모듈과 비교하여 70% 이상 감소하였다. 그러나 기존 모듈 대비평균 3.8dB의 수신 감도 하락이 나타났다. 이는 SiP에 존재하는 DC-DC Converter의 노이즈로 인한 2.8dB의 신호 감도 저하에 기인한 것이다.

• 정보처리학회논문지C
• /
• 제10C권5호
• /
• pp.625-634
• /
• 2003

인터넷 멀티캐스팅 기술은 지난 10여년간의 기술 발전에도 불구하고 아직 본격적인 서비스 보급이 이루어지지 못하고 있다. 주된 이유는 멀티캐스트 라우팅에서의 트래픽 제어, 글로벌 인터넷에서의 멀티캐스트 주소 할당, 멀티캐스트 신뢰전송 기법 등의 문제가 아직 해결되지 않았기 때문이다. 최근 인터넷 방송, 실시간 증권정보 서비스 등의 멀티캐스트 응용 서비스에 대한 요구가 급격히 증가함에 따라, 새로운 인터넷 멀티캐스팅 기술로써 오버레이 멀티캐스팅이 개발되고 있다 본 논문은 오버레이 멀티캐스팅 기술을 살펴보고, 새로운 멤버가 그룹에 가입하는데 걸리는 시간을 단축하는 방안을 제안한다. 기존의 방식은 잠재적인 부모 노드를 발견하기 위해서 한번에 트리의 한 레벨씩을 검색해 내려갔으며, 이로 인하여 긴 가입 지연 시간이 야기되었다. 또한, 트리의 매 레벨에서 자신과 가까운 노드를 잠재적인 부모 노드로 지적함으로써, 최적의 부모 노드를 선택하려고 노력하였지만 실제로 노드의 제한 차수로 인하여 자신과 가장 가까운 잠재적인 부모 노드를 선택하지 못하였으며, 이로 인해 트리의 효율성이 떨어졌다. 본 논문에서는 이러한 가입 지연 시간을 감소시키고, 생성된 트리의 효율성을 높이기 위해서, 트리의 두 레벨씩 검색하는 방안을 제안한다. 이 방식은 가입 요청 메시지를 자신의 자식 노드에게 전달하는 방식으로, 평상시에 트리 유지를 위한 추가적인 오버헤드 없이, 가입 요청이 왔을 때 검색 메시지의 수를 증가시켜서, 빠르게 가입을 완료한다. 또한, 더 많은 노드를 검색함으로써 좀 더 효율적인 트리를 생성하게 도와준다. 제안하늘 방안의 성능을 평가하기 위해서, 그룹의 멤버 수와 제한 차수를 기준으로 검색 시간 및 검색한 노드의 수 그리고 트리 스위칭 횟수를 측정하였다. 시뮬레이션 결과에서 제안한 기법이 기존의 방식에 비해서 가입 지연 시간을 단축시켰으며, 좀 더 효율적인 트리를 생성하는 것을 볼 수 있었다.본 연구결과 이소플라본은 전립선암 환자의 혈중 지질 패턴과 항산화체계를 개선시키는 효과를 보였다. 따라서 이소플라본이 지질대사에 미치는 영향과 항산화작용기전에 대한 보다 심층적인 연구가 이루어져야 할 것이며, 보다 많은 전립선암 환자를 대상으로 이소플라본 섭취에 따른 장기적인 임상실험연구가 이루어져 이소플라본이 전립선암 환자의 삶의 질을 향상시킬 수 있는지에 대한 다각적인 검토가 필요하다고 본다. 중 참가성 , 흥미성, 지속성, 대인관계 4개의 측정항목에서 높은 증가율을 보여 치료효과가 큰 것으로 판단된다. 원예 치료 실시 후의 자체설문지 평가결과 원예 활동을 통해서 달라진 점은 개인적으로 가족, 이웃 간의 긍정적인 변화를 이끌어내고 있다는 것을 발견할 수 있었고 다양한 원예프로그램이 인상깊었다고 하였으며 다음진행에 추가적으로 야외에서 진행할 프로그램에 대한 욕구가 표출되었다. 이것을 통해 개인적 치료경험과 가족, 이웃 간의 지지망 형성이 중요하며 긍정적인 영향을 주었다는 것을 볼 수 있었다. 또한 다양한 원예치료프로그램의 적용과 야외 활동을 조화롭게 적용한다면 성공적인 프로그램 진행에 도움을 될 것으로 판단된다. 이상의 결과를 종합하면 정신지체장애인에게 원예치료 프로그램을 실시한 이후에 원예에 대한 관심이 높고 자아존중 감이 향상되었으며 원예치료 프로그램에 대한 높은 만족도를 보였고 원예치료에 대한 참가성, 흥미성, 지속성, 대인관계성에서 높은 증가율을 보여 치료프로그램의 개입이 유의미한 효과가 있는 것으로 나타났다. 이러한 결과들 볼 때 의도적인 원예치료활동을 통해서 심신의 치료를 경험하$\infty$I 자존감이 향상되며 회원 상호관계를 통한 사회부적응문제를 치료하여 사회성이 향상될 것이라는 목표에 대한 높은 달성정도를 볼 수 있다. 또한 지속적이고 흥미를 유발하는 원예치 료 프로그램을 적용한다면 심리적, 신체적, 정서적 치료효과가 높은 향상을 보이고 자신감과