• The Journal of the Acoustical Society of Korea
• /
• v.6 no.1
• /
• pp.58-65
• /
• 1987

The audible tones of switching system employed in the country at present do not only disagree with CCITT Recommendation Q35, but also are different in the specifications and the sense of hearing. Such a discord with the specifications and the sense of hearing causes a subscriber and an operator to confuse. In this paper characteristics of the sense of hearing of them and the accuracy of tone specifications are studied and novel unified audible specifications are proposed. And it is showed that the digital tone generation of digital switching systems can be implemented readily, using a ROM.

• Journal of the military operations research society of Korea
• /
• v.34 no.1
• /
• pp.13-30
• /
• 2008

In this study, the establishment strategies of Military Standardization Information System and Integrated Database(DB) based on standardization information are provided. The establishment strategies introduced here are based on the appliable common(commercial and military) classification of specifications/standards. The common(commercial and military) classification of specifications/standards adapted in this study can be constructed through mapping by 'grouping' between the MS(Military Specification/Standards) and KS(Korean industry Standards) to increase efficiency. In detail, the establishment of Integrated Database(DB) based on standardization information provides the various channel of interactive communication among specifications/standards. Additionally, standardization information systems provide the basis of the integrated specifications/standards converged between the commercial and military sector.

• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.23-27
• /
• 2012

The evaluation of simulation models against ADS-33 quantitative rotorcraft handling qualities metrics has, in the past, been a time consuming effort, involving many individual analyses in both the time and frequency domains. Manual tuning of control system parameters to meet handling qualities and performance specifications has been cumbersome and complicated. Performing rigorous trade-off studies for numerous variations in the control system is too time consuming to be practicable. With the complex interaction of time- and frequency based specifications for the closed- and broken-loop responses, it is difficult to know if the design makes the most effective use of the available control power. The Control Designer's Unified Interface (CONDUIT) software makes possible rapid optimization and trade-offs of design configurations against handling qualities specifications.

• Journal of the Korea Society for Simulation
• /
• v.6 no.1
• /
• pp.25-40
• /
• 1997

This study deals with an autonomous generation of simulation codes for the design of processes of c CIM system based on the concept of model transformation. We assume we have a functional model of an organization which is developed using the well-known IDEF0 methodology. Then, a modeling methodology, called PROWD(PRocess flOW Description), is suggested to develop the flow processes of the organization. To Derive simulation specifications for the transformed PROWD model, we define a module of a "unit system" for each activity of PROWD model. Then specifications for system entities and resources are derived from input/control/mechanism/output and entity flows of PROWD model. Entitiy queues are defined from the sates and events of unit systems. Finally, SIMAN model frame is generated from those specifications through a suggested algorithm. The implementability and validity of the proposed approach is tested by developing a prototype of a computer-assisted design system on the operation processes of FMS installed at SNU-ASRI (Seoul National University-Automation and Systems Research Institute).nstitute).

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.1-15
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.67-70
• /
• 2002

This paper presents an optimal robust LQ-PID controller design method for a second order system with time-delay to meet design specifications. By LQR formulation of the second order system with time-delay, tuning parameters of PID controller are related by the weighting factors Q and R of cost function. The selection of the weighting factors Q and R are chosen to satisfy such the design specifications as overshoot and settling time.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.225-226
• /
• 2006

A service level agreement (SLA) is a formal contract between a service provider and a subscriber that contains detailed technical specifications called service level specifications (SLSs). In this paper, we propose SLA data analysis system which provides an effective decision-making information to network service provider. The SLA data analysis system executes trend analysis and statistics analysis using SLA violation and refund information. The analysis results are presented in many ways such as tables, graphs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.54.3-54
• /
• 2001

This paper presents a controller design technique for standard 2nd-order system satisfying user-specified phase margin. A simple method is presented to meet stability margin for the 2nd-order system, which is important since the 2nd-order plant models are frequently encountered in the practical plant models such as actuators of the optical drive systems. Through the comparison of the specified stability margin and achieved stability margin, it is shown in the simple example that the proposed technique is useful in the initial design of control systems with stability margin specifications.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.144-152
• /
• 2013

PRT(Personal Rapid Transit) system is a new transportation system which will meet increasing demands of traffic in Korea. It is also an environment-friendly transportation and automatically operated. For these reasons, researches on the PRT system are actively undergoing, but the PRT vehicles have different forms of subway, bus, etc. There are no design standards to evaluate structural integrity, yet. In this paper, Structural design specifications are derived, which are based on the performance test standard for EMU and the ASCE-APM standards. We also perform the static and fatigue analyses by FE simulation and suggest strategies to improve an initial structure design. In addition, we derived the design specifications for energy-absorbing structures to meet the conditions of the collision scenarios predefined from a view point of operation safety.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.501-506
• /
• 2001

The Korean government established a domestic specification system, and regulated that owner should produced construction project specifications, instead of special provisions, in design phase, January 1998. But in Korea the ability of construction engineers for construction project specification are insufficient. So the government had built up a database of standard specifications and developed a supporting system for writing construction project specification(SPECMAKE) in 1999. However, it is a PC base stand-alone system, so it is not convenient to update the database. In order to overcome these limitations, the purpose of this paper builds up a database of construction criteria and develops a automatic writing system for construction project specification on web base. The database contains standard specifications, design and construction guidelines related with construction business. And this paper describes the frameworks, the components, and the functions of the specifications writing system for the construction projects.