• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1288-1293
• /
• 2009

This paper discusses about modeling method to simulate a nonlinear behavior like sliding or rocking of two stacked body system under earthquake condition. A double body system design can be an option to reduce seismic response of a component in comparison to a single body system for free standing structures. Therefore, according to the priority of components, the structure is to be designed by proper ratio of partition in their height for improvement of seismic capability and structural integrity. Nonlinear modeling and analysis using simple rigid body and dynamic system has been performed to check the trend in such cases. As a result, one of the two bodies can be chosen to reduce the seismic response from energy absorption of the other one by appropriate application of friction ratios not only in slip-slip condition but in slip-rock condition.

• 전기의세계
• /
• v.26 no.6
• /
• pp.55-58
• /
• 1977

This paper deals with the transient analysis of an amplidyne dc voltage regulating system under the following conditions: (1) assuming all the components of the system to be linear, (2) considering the effect of amplidyne saturation. The mathematical technique employed is state variables method. The calculated response curves are compared with the experimental results obtained on a practical system. The main results can be summerized as follows: 1) The effect of amplidyne saturation on the transient response of a dc voltage regulating system is to reduce the overshoot and setting time. 2) With the increase in level of the step reference voltage, the system response becomes apesiodic. 3) The steady output voltage is reduced appreciably compared to the linear case.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• The Journal of Society for e-Business Studies
• /
• v.3 no.1
• /
• pp.175-194
• /
• 1998

The purpose of this study is to examine the current status of Quick Response adoption, and to recognize the implementation problems of QR system in the Korean fashion industry. We reviewed the theoretical background of QR system, analyzed the current status of QR adoption, and identified critical issues to implement the system in our fashion business environment. Previous literatures and information gained from communication service organizations were used for this study The major problems recognized are lack of inter-organizational information network, closed supply channels, non-standardization of QR implementation, and low level of information technology usage including KAN, POS, and EDI. Strong mutual partnership between streams for shared common goals and clear QR mind setting of top management with commitment to information sharing are considered needed for the successful adoption of QR system in domestic fashion industry.

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.281-291
• /
• 2019

In order to reflect complex and diverse building types, resident characteristics and disaster factors, it is necessary to introduce a flexible situation-based response system based on real-time information. Intelligent CCTV, hybrid sensor, location scanner, and customized broadcasting device were examined to introduce for the real-time response intelligent response system and its feasibility was verified through field test. In addition, based on the real-time information, the evacuation simulation was executed by assuming the dormitory building and the resident of the school, and the safety of the evacuation and the shortening of the pinnacle time were confirmed. The feasibility of real time information based evacuation comparing with the existing evacuation system were verified in the case of evacuation.

• Journal of applied mathematics & informatics
• /
• v.40 no.3_4
• /
• pp.393-407
• /
• 2022

In this paper, a diffusive predator-prey system with Beddington DeAngelis functional response and the modified Leslie-Gower type predator dynamics when a prey population is infected is considered. The predator is assumed to predate both the susceptible prey and infected prey following the Beddington-DeAngelis functional response and Holling type II functional response, respectively. The predator follows the modified Leslie-Gower predator dynamics. Both the prey, susceptible and infected, and predator are assumed to be distributed in-homogeneous in space. A reaction-diffusion equation with Neumann boundary conditions is considered to capture the dynamics of the prey and predator population. The global attractor and persistence properties of the system are studied. The priori estimates of the non-constant positive steady state of the system are obtained. The existence of non-constant positive steady state of the system is investigated by the use of Leray-Schauder Theorem. The existence of non-constant positive steady state of the system, with large diffusivity, guarantees for the occurrence of interesting Turing patterns.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.341-363
• /
• 2012

The spectral representation method is a quick and versatile tool for the generation of spatially variable, response-spectrum-compatible simulations to be used in the nonlinear seismic response evaluation of extended structures, such as bridges. However, just as recorded data, these simulated accelerations require processing, but, unlike recorded data, the reasons for their processing are purely numerical. Hence, the criteria for the processing of acceleration simulations need to be tied to the effect of processing on the structural response. This paper presents a framework for processing acceleration simulations that is based on seismological approaches for processing recorded data, but establishes the corner frequency of the high-pass filter by minimizing the effect of processing on the response of the structural system, for the response evaluation of which the ground motions were generated. The proposed two-step criterion selects the filter corner frequency by considering both the dynamic and the pseudo-static response of the systems. First, it ensures that the linear/nonlinear dynamic structural response induced by the processed simulations captures the characteristics of the system's dynamic response caused by the unprocessed simulations, the frequency content of which is fully compatible with the target response spectrum. Second, it examines the adequacy of the selected estimate for the filter corner frequency by evaluating the pseudo-static response of the system subjected to spatially variable excitations. It is noted that the first step of this two-fold criterion suffices for the establishment of the corner frequency for the processing of acceleration time series generated at a single ground-surface location to be used in the seismic response evaluation of, e.g. a building structure. Furthermore, the concept also applies for the processing of acceleration time series generated by means of any approach that does not provide physical considerations for the selection of the corner frequency of the high-pass filter.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.331-339
• /
• 2010

On intranet system, it is essential element for providing information to decrease response time. To realize this efficiencies of response time of the network, a lot of research have been conducted. The purpose of the research and implementation is to shorten the response time of information system. We can realize final goal of information system through fast response time. This final goal of information system is to secure the performance efficiency within the required time. In order to acquire the method of warranty of fast response time, the efficient measurement method is essential. This research suggests a latency test techniques being used on infrastructure system and also offers a response time measurement methodology. Methodology proposed in this research has proven that it is possible to measure response time through the scheduled method. Also it is possible to develop a enhanced networking capabilities, and information system capabilities for the development of information system.

• Asia pacific journal of information systems
• /
• v.7 no.3
• /
• pp.23-37
• /
• 1997

Although numerous models and solution algorithms to design efficient distributed databases have been developed, very few have been validated for their effectiveness. In this paper, we develop a simulation system which can be used to analyze and validate the average response time of distributed database designs. Our simulation system models comprehensive query processing strategies such as semijoin as well as a concurrency control mechanism We analyze and validate an average response time distributed database design model using our simulation system.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.12 no.3
• /
• pp.139-151
• /
• 2008

We investigate a three species food chain system with Lotka-Volterra type functional response and impulsive perturbations. We find a condition for the local stability of prey or predator free periodic solutions by applying the Floquet theory and the comparison theorems and show the boundedness of this system. Furthermore, we illustrate some examples.