• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.69-76
• /
• 2004

Polishing a die that has free-form surfaces is a time-consuming and tedious job, and requires a considerable amount of high-precision skill. In order to reduce the polishing time and cope with the shortage of skilled workers, an automatic polishing robot system was developed. The polishing robot system is composed of two subsystems, a three-axis machining center and a two-axis polishing head. The machining center is controlled by a FANUC controller, and the polishing head by DSP controller. The system has five degrees of freedom and is able to keep the polishing tool normal to the die surface during operation. To easily operate the developed polishing robot system, this study developed an integrated operating program in the Windows environment. The program consists of five modules: a polishing data generation module, a code separation module, a polishing module, a graphic simulator module, and a teaching module. Also, the automatic teaching system was developed to easily obtain teaching data and it consists of a three dimensional joystick and a proximity sensor. Also, to evaluate the performance of the integrated operating program and the polishing robot system, polishing experiments of a die of shadow mask were carried out.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3345-3356
• /
• 1994

A general purpose program, TURBO-3D, for the analysis of 3-D fluid flow in complex geometry has been developed, which employs a standard $k-\varepsilon$ turbulence model and a general nonorthogonal grid system. For the purpose of verification of the program and testing the applicability, turbulent flows in an S-shaped diffuser and turbulent flows over an backward facing step are solved and compared with the earlier results. Comparison with the results by the STAR-CD program has been also made for the same flow configuration and grid structure. The agreements are excellent and hence the program has been verified. Since the present program is applicable only on limited flow phenomena and lacks the pre-and post processor, further improvements toward these directions are being made.

• Journal of Engineering Education Research
• /
• v.16 no.6
• /
• pp.65-77
• /
• 2013

The purpose of this paper are to evaluate the program outcome(PO) for mechanical engineering program at Chosun University, In order to achieve the objectives of this study, we analyze the evaluation system on measuring and analyzed methods of PO. We expect that the evaluation system of PO will help program members to efficiently manage the engineering program accreditation evaluations. This paper were to improve PO evaluation system throughout assessment tools, measurements and analysis of PO between current students and faculty. This study would be confined measurements, analysis and improvement of PO for current students, and faculty in this program.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.149-156
• /
• 2008

In this paper, we develope the Exhibition Grounds Management System utilizing the ubiquitous computing which integrates the RFID ubiquitous main technology, existing use technology Bar-code, the Mobile communication technology for IT main technology field. The developed system consists of the program for exhibition information. the visitor registration program, manager program and mobile program for the visitor's current location inquiry and the exhibition management. This system is realized and designed based on database, web program, mobile program, wireless telecommunication technology. The automation technology utilizing the developed RFID system and the Exhibition Grounds Management System integrated with the wireless packet telecommunication using the mobile telecommunication technology could have a ripple effect on whole information industrial application fields.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.63-67
• /
• 2009

In RFID system, Tag's Identification data is processed in host computer by application program. Example of application program is parking administration program, library state program etc.. Tag's ID that is recognized in reader is inputted to the Host computer. Application program of computer searches data in DB of computer such as Tag ID. After finding the same ID, host computer send to control command to driver H/W in accordance with application purpose. But, It need to confirm in long distance whether achievement process is acted normally. There will be the 2 methods, when we monitors the process in long distance. One is wired monitoring system, another is wireless monitoring system. Among wire method, internet communication network is useful. RFID system manufacture first in this treatise. RFID system Embody using EM4095 chip that is doing 125KHz by carrier wave. Tag's characteristic ID is sent in remote place through module that use W3100A chip. This system Manufacture, and data send-receive confirmed using simple application program. Reception confirm by result, and pictures show by whole system and each part. And a control program explained of each part.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1992.11a
• /
• pp.32-36
• /
• 1992

This paper develops the dynamic equivalents program combined with graphic user interface(GUI), to solve the stability of large power system. The p개posed method is coherency-based dynamic equivalents for transient stability studies. The program also provides with pull-down menu and Hangout help information for users. The developed dynamic equivalents program is suitable for the transient stability studies of a large power system with lots of data. The dynamic equivalents demonstrated over the New England system with 39 buses and 10 generators.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.34-39
• /
• 1998

This paper describes the simulation approaches employed for a vector control system of induction motor drive using SIMNON for windows program. SIMNON program tool can solve differential and difference equations for nonlinear dynamical control system. One powerful feature is its ability of allowing integration of individual program modules after each individual module is programed and tested independently. This particular feature is exploited here for an SVPWM inverter drive by real-time modeling and simulation. The suggested programs are provided a simple and complete simulation for induction motor vector drive system.

• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.339-345
• /
• 2022

Outcome-based education (OBE) is a tried-and-true teaching technique based on a set of predetermined goals. Program Educational Objectives (PEOs), Program Outcomes (POs), and Course Outcomes (COs) are the components of OBE. At the end of each year, the Program Outcomes are evaluated, and faculty members can submit many recommended measures which dependent on the relationship between the program outcomes and its courses outcomes to improve the quality of program and hence the overall educational program. When a vast number of courses are considered, bad actions may be proposed, resulting in unwanted and incorrect decisions. In this paper, a recommender system, using collaborative filtering and association rules algorithms, is proposed for predicting the best relationship between the program outcomes and its courses in order to improve the attributes of the graduates. First, a parallel algorithm is used for Collaborative Filtering on Data Model, which is designed to increase the efficiency of processing big data. Then, a parallel similar learning outcomes discovery method based on matrix correlation is proposed by mining association rules. As a case study, the proposed recommender system is applied to the Computer Information Systems program, College of Computer Sciences and Information Technology, Al-Baha University, Saudi Arabia for helping Program Quality Administration improving the quality of program outcomes. The obtained results revealed that the suggested recommender system provides more actions for boosting Graduate Attributes quality.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.44.2-44.2
• /
• 2010

Recently, SRAO has upgraded from one-pole system software to dual-pole system software. We present the new dual-pole system software and how it works in detail. Dual-pole observation is enabled with just some commands. To do so, backend-system controls two different hardwares, proceeds two different data and make two files at one observation.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.333-340
• /
• 2001

This paper presents development of the program which calculates the electric quantities such as current, voltage at each element of railway electrification system in static state. The purpose of this program is to estimate the adequacy of railway electrification system through simulations. And it contributes the estimations for optimal railway electrification system by calculating the maximum current and voltage. The simulation program is coded through GUI(Graphic User Interface) technique for user to operate easily.