• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.686-688
• /
• 2021

The performance assessment in real sea is very important to increase the reliability of the fishing gear automatically identification monitoring system. The concept of real sea experiment for fishing gear automatically identification monitoring system is introduced and results of communication performance of RoLa and LTE Cat.M1 modules are reported through this research.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.283-295
• /
• 2010

Although some large units, upper than division, have a identification system, most of them depend on US military. Especially, the company unit can not but execute GOP(General OutPost) guidance and battles inefficiently because they apply the method of conventional identification system. urrently, North Korea causes the high tension of peninsular by experimenting nuclear weapons and launching ICBM(Intercontinental Ballistic Missile). In addition, ROK military will reduce the number of personnel and division through reorganizing the structure into NCW (Network Centric Warfare) until 2020. These unstable situation and future tendency require the high technical identification system based on USN(Ubiquitous Sensor Network) in company unit level. his study suggests the method that the company unit apply the identification system based on USN which distinguish between friend and foe in the warfare. The identification system concludes the results through experiment of military analysis model (AWAM; Army Weapon effectiveness Analysis Model). After analyzing the experiment results, it indicates the budget requirement and operational operability of identification system. This will be able to improves battle efficiency and to prevent damages of friendly forces.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2687-2689
• /
• 2000

In many cases the systems are so complex that it is not possible to obtain reasonable models using physical insight. Also a model based on physical insight contains a number of unknown parameters even if the structure is derived from physical laws. These problems can be solved by system identification. In this paper, Arago's disk system which has both stable and unstable regions is selected as an example for identification and a state-space model is identified using tailor-made model structure of this system. In stable region, a state-space model of Arago's disk system is identified through open loop experiment and a state-space model of unstable region is identified through closed loop experiment after using fuzzy controller to stabilize unstable system.

• Earthquakes and Structures
• /
• v.8 no.4
• /
• pp.843-857
• /
• 2015

System identification is regarded as the most basic technique for structural health monitoring to evaluate structural integrity. Although many system identification techniques extracting mode information (e.g., mode frequency and mode shape) have been proposed so far, it is also desired to identify physical parameters (e.g., stiffness and damping). As for high-rise buildings subjected to long-period ground motions, system identification for evaluating only the shear stiffness based on a shear model does not seem to be an appropriate solution to the system identification problem due to the influence of overall bending response. In this paper, a system identification algorithm using a shear-bending model developed in the previous paper is revised to identify both shear and bending stiffnesses. In this algorithm, an ARX (Auto-Regressive eXogenous) model corresponding to the transfer function for interstory accelerations is applied for identifying physical parameters. For the experimental verification of the proposed system identification framework, vibration tests for a 3-story steel mini-structure are conducted. The test structure is specifically designed to measure horizontal accelerations including both shear and bending responses. In order to obtain reliable results, system identification theories for two different inputs are investigated; (a) base input motion by a modal shaker, (b) unknown forced input on the top floor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.199-204
• /
• 2000

Generally, The systems are so complex that it not possible to obtain reasonable model using physical insight. Also a model based on physical insight contains a number of unknown parameters even if the structure is derived from physical laws. To solve these problems, the systems identification is described in this paper. So, AC servo motor system which has both open loop and closed loop is selected as an example for identification. A state-space model of AC servo motor system is identified through open loop experiment and identified through closed loop experiment and using pole placement integral controller to open loop system. As the results, From ARMA model, We have obtained continuous-time state space model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.63.2-63
• /
• 2002

● Introduction ● System Identification ● PD Controller Design ● Verifying the Model & Simulation ● Experiment for Attitude Control ● Results ● Conculsions

• Smart Structures and Systems
• /
• v.20 no.4
• /
• pp.415-426
• /
• 2017

Traditional experimental verification for nonlinear system identification often faces the problem of experiment model repeatability. In our research, a steel frame experimental model is developed to imitate the behavior of a single story steel frame under horizontal excitation. Two adjustable rotational dampers are used to simulate the plastic hinge effect of the damaged beam-column joint. This model is suggested as a benchmark model for nonlinear dynamics study. Since the nonlinear form provided by the damper is unknown, a Morlet wavelet based method is introduced to identify the mathematical model of this structure under different damping cases. After the model identification, earthquake excitation tests are carried out to verify the generality of the identified model. The results show the extensive applicability and effectiveness of the identification method.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.134.2-135
• /
• 2003

The plant-pathogenic species S. scabies, S. acidiscabies, and S. turgidiscabies cause the scab disease of potato and produce the phytotoxins, thaxtomins. necl, a gene conferring a necrogenic phenotype, is involved in pathogenicity and physically linked to the thaxtomin A biosynthetic genes. Identification of the pathogenic strains of Streptomyces from soil was performed through the polymerase chain reaction by using specific pathogenicity primer sets derived from the necl gene sequences of Streptomyces smbies. The DNA was extracted from soil using a bead-beating machine and modifications of the FastPrep system. The DNA was suitable for direct use in the PCR. The PCR products showed the bands of approximately 460 bp. This methods can be very usuful in identifying species responsible for scab diseases and studying on the ecology of plant-pathogenic Streptomyces spp.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.492-503
• /
• 2008

With the recent development and increasing importance of personal identification systems, biometric technologies with less risk of loss or unauthorized use are being popularized rapidly. In particular, because of their high identification rate and convenience, fingerprint identification systems are being used much more commonly than other biometric systems such as iris recognition, face recognition and vein pattern recognition. However, a fingerprint identification system has the problem that artificially forged finger-prints can be used as input data. Thus, in order to solve this problem, the present study proposed a method for detecting forged fingerprints by measuring the degree of attenuation when the light from an optical fingerprint sensor passes through the finger and analyzing changes in the transmission of light over stages at fixed intervals. In order to prove improvement in the performance of the proposed system, we conducted an experiment that compared the system with an existing multi-sensor recognition system that measures also the temperature of fingerprint. According to the results of the experiment, the proposed system improved the forged fingerprint detection rate by around 32.6% and this suggests the possibility of solving the security problem in fingerprint identification systems.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.69-77
• /
• 2011

In this paper, an optimal PID sliding mode controller is proposed for the position control of electro-hydrostatic actuator(ERA) systems with system uncertainties and saturation in the motor. An ERA prototype is developed and system modeling and parameter identification are executed. Then, optimal PID and optimal anti-windup PID controller are designed based on identified system model by using optimization toolbox in MA TLAB/Simulink and the performance of the two control systems are compared by experiment. It was found that the optimal anti-windup PID control system has better performance than the optimal anti-windup PID control system.