• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.73-82
• /
• 2009

The experiment was carried out from January through December in 2008 at Chungnam National University and the Unbong Animal Genetic Resources Station, NIAS. The experimental animals were twelve dairy goats (female, $30{\pm}1.8kg$), twelve Korean native Boats(female, $24{\pm}2.4kg$) and five sika deer(female, $92{\pm}5.2kg$). A total of 11 different types of hay and straw were tested in this study: such straw imported from USA in 2006 as annual ryegrass, perennial ryegrass, tall fescue and Kentucky bluegrass, and such hay imported from USA in 2007 as alfatfa, bermudagrass, timothy, kleingrass, oat and orchardgrass, and such domestic hay as mixed hay There were significant differences in chemical composition and in vitro dry matter digestibility (IVDMD) among the various types of imported hay and straw (p<0.05). Besides alfalfa hay and orchardpass hay all of the imported hay contained lower crude protein (CP) and IVDMD but contained higher neutral detergent fiber(NDF) and acid detergent fiber (ADF) than the domestic hay. According to the kinds of the imported hay, relative feed value (RFV) made the difference and the hay grades were ranged from 4 to 5, based on the RFV. According to the kinds of the imported hay, there were markedly differences in dry matte. (DM) intake and palatability ranking among dairy goats, Korean native goats, and sika deer. DM intake and palatability ranking were high in common between orchardgrass hay and bermudagrass hay, but Kentucky bluegrass straw, tall fescue straw, perennial ryegrass straw and annual ryegrass straw were proved to be very low in DM intake and palatability ranking. In conclusion, the quality and palatability among the imported hay that was tested in the study were quite variable and lower than expected. It is required to establish a better feed evaluation system for the imported hay.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.286-298
• /
• 2002

The Remote Procedure Call(RPC) has been traditionally used for Inter Process Communication(IPC) among precesses in distributed computing environment. As distributed applications have been complicated more and more, the Mobile Agent paradigm for IPC is emerged. Because there are some paradigms for IPC, researches to evaluate and compare the performance of each paradigm are issued recently. But the performance models used in the previous research did not reflect real distributed computing environment correctly, because they did not consider the evacuation elements for providing security services. Since real distributed environment is open, it is very vulnerable to a variety of attacks. In order to execute applications securely in distributed computing environment, security services which protect applications and information against the attacks must be considered. In this paper, we evaluate and compare the performance of the Remote Procedure Call with that of the Mobile Agent in IPC paradigms. We examine security services to execute applications securely, and propose new performance models considering those services. We design performance models, which describe information retrieval system through N database services, using Petri Net. We compare the performance of two paradigms by assigning numerical values to parameters and measuring the execution time of two paradigms. In this paper, the comparison of two performance models with security services for secure communication shows the results that the execution time of the Remote Procedure Call performance model is sharply increased because of many communications with the high cryptography mechanism between hosts, and that the execution time of the Mobile Agent model is gradually increased because the Mobile Agent paradigm can reduce the quantity of the communications between hosts.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.187-197
• /
• 2010

Carbon dioxide Capture and Storage(CCS) is regarded as one of the most promising options to response climate change. CCS is a three-stage process consisting of the capture of carbon dioxide($CO_2$), the transport of $CO_2$ to a storage location, and the long term isolation of $CO_2$ from the atmosphere for the purpose of carbon emission mitigation. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the $CO_2$ mixture captured from the power plants and steel making plants contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_2$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification, transport and injection processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to analyze the impact of these impurities on the whole CCS process at initial design stage. The purpose of the present paper is to compare and analyse the relevant physical property models including BWRS, PR, PRBM, RKS and SRK equations of state, and NRTL-RK model which are crucial numerical process simulation tools. To evaluate the predictive accuracy of the equation of the state for $CO_2-SO_2$ mixture, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $SO_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable physical property model with optimized binary parameter in designing the $CO_2-SO_2$ mixture marine geological storage process.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.217-226
• /
• 2009

Marine geological storage of $CO_2$ is regarded as one of the most promising options to response climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the marine geological structure such as deep sea saline aquifer. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_x$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to perform numerical process simulation using thermodynamic equation of state. The purpose of the present paper is to compare and analyse the relevant equations of state including PR, PRBM, RKS and SRK equation of state for $CO_2-N_2$ mixture. To evaluate the predictive accuracy of the equation of the state, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $N_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable equation of state and relevant binary parameter in designing the $CO_2-N_2$ mixture marine geological storage process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.301-307
• /
• 2013

This study was evaluated high end research grade Near Infrared Reflectance Spectrophotometer (NIRS) to field grade multiple Near Infrared Reflectance Spectrophotometer (NIRS) for rapid analysis at fresh rice leaf at sight with 238 samples of fresh rice leaf during year 2012, collected Jeollabuk-do for evaluate accuracy and precision between instruments. Firstly collected and build database high end research grade NIRS using with 400 nm ~ 2500 nm during from year 2003 to year 2009, seven years collected fresh rice leaf database then trim and fit to field grade NIRS with 1200 nm ~ 2400 nm then build and create calibration, transfer calibration with special transfer algorithm. The result between instruments was 0.005% differences, rapidly analysis for chemical constituents, Total nitrogen in fresh rice leaf within 5 minutes at sight and the result equivalent with laboratory data. Nevertheless last during more than 8 years collected samples for build calibration was organic samples that make differentiate by local or yearly bases etc. This strongly suggest population evaluation technique needed and constantly update calibration and maintenance calibration to proper handling database accumulation and spread out by knowledgable control laboratory analysis and reflect calibration update such as powerful control center needed for long lasting usage of fresh rice leaf analysis with NIRS at sight. Especially the agriculture products such as rice will continuously changes that made easily find out the changes and update routinely, if not near future NIRS was worthless due to those changes. Many research related NIRS was shortly study not long term study that made not well using NIRS, so the system needed check simple and instantly using with local language supported signal methods global distance (GD) and neighbour distance (ND) algorithm. Finally the multiple popular field grades instruments should be the same results not only between research grade instruments but also between multiple field grade instruments that needed easily transfer calibration and maintenance between instruments via internet networking techniques.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.2
• /
• pp.70-80
• /
• 2003

We report the first direct measurement of $CO_2$ flux over Kwangneung broadleaf deciduous forest, one of the tower flux sites in KoFlux network. Eddy covariance system was installed on a 30 m tower along with other meteorological instruments from June to August in 2002. Although the study site was non-ideal (with valley-like terrain), turbulence characteristics from limited wind directions (i.e., 90$\pm$45$^{\circ}$) was not significantly different from those obtained at simple, homogeneous terrains with an ideal fetch. Despite very low rate of data retrieval, preliminary results from our analysis are encouraging and worthy of further investigation. Ignoring the role of advection terms, the averaged net ecosystem exchange (NEE) of $CO_2$ ranged from -1.2 to 0.7 mg m$^{-2}$ s$^{-1}$ from June to August in 2002. The effect of weak turbulence on nocturnal NEE was examined in terms of friction velocity (u*) along with the estimation of storage term. The effect of low uf u* NEE was obvious with a threshold value of about 0.2 m s$^{-1}$ . The contribution of storage term to nocturnal NEE was insignificant; suggesting that the $CO_2$ stored within the forest canopy at night was probably removed by the drainage flow along the hilly terrain. This could be also an artifact of uncertainty in calculations of storage term based on a single-level concentration. The hyperbolic light response curves explained ＞80% of variation in the observed NEE, indicating that $CO_2$ exchange at the site was notably light-dependent. Such a relationship can be used effectively in filling up the missing gaps in NEE data through the season. Finally, a simple scaling analysis based on a linear flow model suggested that advection might play a significant role in NEE evaluation at this site.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.270-279
• /
• 2005

It is important to understand and evaluate the environmental impacts of rice cultivation for developing environmentally-friendly agriculture because rice is main crop in Korea and rice cultivation have both functions of water pollution and purification with environmental and cultivation conditions. This paper presents the evaluation of nitrogen impact by rice cultivation on water system. A simple protocol was proposed to assess the potential amount of nitrogen outflow from paddy field and most of parameters affect on the nitrogen outflow from paddy field such as the amount of fertilizer application, water balance, the quality and quantity of irrigation water, soil properties, nitrogen turnover in the soil and cultivation method were considered. To develop the protocol, coefficients for parameters affected nitrogen turnover and outflow were gotten and summarized by comparison and analysis of all possible references related, and by additional experiments at field and laboratory. And potential amount of nitrogen input and output by water in paddy field were estimated with the protocol at the conditions of the nitrogen contents of irrigation water, amount of fertilizer application, and irrigation methods. Where irrigation water was clean, below 1.0 mg $L^{-1}$ of nitrogen concentration, rice cultivation polluted nearby watershed. At the conditions of 2.0 mg $L^{-1}$ of nitrogen concentration, 110 kg $ha^{-1}$ of nitrogen fertilizer application and flooding irrigation, rice cultivation had water pollution function, but it had water purification function with intermittent irrigation. At the conditions of 3.0 mg $L^{-1}$ of nitrogen concentration and 110 kg $ha^{-1}$ of nitrogen fertilizer application, rice cultivation had water purification function, but that had water pollution function with 120 kg $ha^{-1}$ of nitrogen application. Where irrigation water was polluted over 6.0 mg $L^{-1}$ of nitrogen, it was evaluated that rice cultivation had water purifying effect, even though the amount of nitrogen application was 120 kg $ha^{-1}$.

• Journal of Life Science
• /
• v.27 no.5
• /
• pp.575-578
• /
• 2017

Here we describe the histological lesion of a viral fibro-papilloma in a hedgehog. After surgical removal from maxilla, the solitary swollen mass was round to oval, yellowish with rough surface and measuring $6{\times}3{\times}2mm$ approximately. The tumor mass was submitted to the laboratory of pathology, college of veterinary medicine, Kyungpook National University for pathological diagnosis. Pathological examination of the tumor was established, the tumor was described grossly and sample was trimmed, sectioned and routinely prepared for histopathological evaluation. The tumor mass was diagnosed as viral fibro-papilloma, as the histological picture showed characteristic features of warts caused by papillomaviruses. The tumor characterized by thickening of the stratum spinosum (acanthosis) and basale, koilocytosis, intra-nuclear inclusion bodies in keratinocytes and fibrosis of submucosa. Further, viral inclusion bodies were demonstrated by Machiavello stain giving red color to the nuclei. No lymphocytes that responsible for regression of the wart could be detected, suggesting the poor possibility of spontaneous regression of the tumor. Papillomatosis is a disease of young animals, but in our case the infected Hedgehog was 5 years old, that maybe due to an impaired immune system, which is also shown by absence of lymphocytes. To the best knowledge of the author, this case presents the first report of viral fibropapillomatosis in Hedgehog.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.152-161
• /
• 2007

This study was conducted to patients visited oral maxillo-facial surgery, KNUH and the purpose of the study was to assess skeletal and dento-alveolar stability after surgical-orthodontic correction treated by skeletal Class III malocclusion patients with open bite versus non-open bite. This retrospective study was based on the examination of 40 patient, 19 males and 21 females, with a mean age 22.3 years. The patients were divided into two groups based on open bite and non-open bite skeletal Class III malocclusion patients. The cephalometric records of 40 skeletal Class III malocclusion patients (open bite: n = 18, non-open bite: n = 22) were examined at different time point, i.e. before surgery(T1), immediately after surgery(T2), one year after surgery(T3). Bilateral sagittal split ramus osteotomy was performed in 40 patients. Rigid internal fixation was standard method used in all patient. Through analysis and evaluation of the cephalometric records, we were able to achieve following results of post-surgical stability and relapse. 1. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in maxillary occlusal plane angle of pre-operative stage(p>0.05). 2. Mean vertical relapses of skeletal Class III malocclusion patients with open bite were $0.02{\pm}1.43mm$ at B point and $0.42{\pm}1.56mm$ at Pogonion point. In skeletal Class III malocclusion patients with non-open bite, $0.12{\pm}1.55mm$ at B point and $0.08{\pm}1.57mm$ at Pogonion point. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in vertical relapse(p>0.05). 3. Mean horizontal relapses of skeletal Class III malocclusion patients with open bite were $1.22{\pm}2.21mm$ at B point and $0.74{\pm}2.25mm$ at Pogonion point. In skeletal Class III malocclusion patients with non-open bite, $0.92{\pm}1.81mm$ at B point and $0.83{\pm}2.11mm$ at Pogonion point. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in horizontal relapse(p>0.05). 4. There were no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in post-surgical mandibular stability(p>0.05). and we believe this is due to minimized mandibular condylar positional change using mandibular condylar positioning system and also rigid fixation using miniplate 5. Although there was no significant relapse tendency observed at chin points, according to the Pearson correlation analysis, the mandibular relapse was influenced by the amount of vertical and horizontal movement of mandibular set-back(p=0.05, r>0.304).

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.