• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.158-175
• /
• 2005

Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.3
• /
• pp.331-338
• /
• 1996

Background : Lung cancer continues to be the leading cause of cancer death in the United States and it's incidence has been rapidly increasing in Korea, too. The overall cure rate for non-small cell lung cancer(NSCLC) is approximately 10%, and the cure is generally achieved by surgery. Unfortunately, however, less than 15% of all patients and less than 25% of those who present with localized disease are candidates for curative surgical resection. So preoperative staging evaluation followed by curative resection has a major role in determining the long tenn prognosis of NSCLC patients. Therefore, we have conducted this study to compare pre-operative and post-operative staging and the long-tenn relapse-free survival rates in NSCLC patients according to its stage. Methods : We analyzed the medical records of 217 NSCLC patients who were operated on for curative resection in Seoul National University Hospital, retrospectively. Among them, 170 patients who were completely resected were selected to determine the long term relapse-free survival rates. Results : Among 217 NSCLC patients, men were 157 and women were 30. The median age was 58 and the difference between men and women was not found. The discrepancy rate between preoperative and postoperative staging was 40.1%. Its major cause was due to the difference of nodal staging. The 3-year relapse-free survival rates were 73%, 53% and 48% in stage I, II and IIIa, respectively. There was no difference of relapse-free duration in recurred patients according to the stage or histologic types. Conclusion : The postoperative pathologic staging determines the long tenn prognosis of patients with NSCLC after surgery, but current preoperative clinical staging can not predict the postoperative pathologic staging correctly. So the improved modality of staging system is required to predict the pathologic staging more correctly.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.85-97
• /
• 2010

Internet communities are a typical space for knowledge creation and use on the Internet as people discuss their common interests within the internet communities. When we define 'Knowledge Communities' as internet communities that are related to knowledge creation and use, they are categorized into 4 different types such as 'Search Engine,' 'Open Communities,' 'Specialty Communities,' and 'Activity Communities.' Each type of knowledge community does not remain the same, for example. Rather, it changes with time and is also affected by the external business environment. Therefore, it is critical to develop processes for practical use of such changeable knowledge communities. Yet there is little research regarding a strategic framework for knowledge communities as a source of knowledge creation and use. The purposes of this study are (1) to find factors that can affect knowledge creation and use for each type of knowledge community and (2) to develop a strategic framework for practical use of the knowledge communities. Based on previous research, we found 7 factors that have considerable impacts on knowledge creation and use. They were 'Fitness,' 'Reliability,' 'Systemicity,' 'Richness,' 'Similarity,' 'Feedback,' and 'Understanding.' We created 30 different questions from each type of knowledge community. The questions included common sense, IT, business and hobbies, and were uniformly selected from various knowledge communities. Instead of using survey, we used these questions to ask users of the 4 representative web sites such as Google from Search Engine, NAVER Knowledge iN from Open Communities, SLRClub from Specialty Communities, and Wikipedia from Activity Communities. These 4 representative web sites were selected based on popularity (i.e., the 4 most popular sites in Korea). They were also among the 4 most frequently mentioned sitesin previous research. The answers of the 30 knowledge questions were collected and evaluated by the 11 IT experts who have been working for IT companies more than 3 years. When evaluating, the 11 experts used the above 7 knowledge factors as criteria. Using a stepwise linear regression for the evaluation of the 7 knowledge factors, we found that each factors affects differently knowledge creation and use for each type of knowledge community. The results of the stepwise linear regression analysis showed the relationship between 'Understanding' and other knowledge factors. The relationship was different regarding the type of knowledge community. The results indicated that 'Understanding' was significantly related to 'Reliability' at 'Search Engine type', to 'Fitness' at 'Open Community type', to 'Reliability' and 'Similarity' at 'Specialty Community type', and to 'Richness' and 'Similarity' at 'Activity Community type'. A strategic framework was created from the results of this study and such framework can be useful for knowledge communities that are not stable with time. For the success of knowledge community, the results of this study suggest that it is essential to ensure there are factors that can influence knowledge communities. It is also vital to reinforce each factor has its unique influence on related knowledge community. Thus, these changeable knowledge communities should be transformed into an adequate type with proper business strategies and objectives. They also should be progressed into a type that covers varioustypes of knowledge communities. For example, DCInside started from a small specialty community focusing on digital camera hardware and camerawork and then was transformed to an open community focusing on social issues through well-known photo galleries. NAVER started from a typical search engine and now covers an open community and a special community through additional web services such as NAVER knowledge iN, NAVER Cafe, and NAVER Blog. NAVER is currently competing withan activity community such as Wikipedia through the NAVER encyclopedia that provides similar services with NAVER encyclopedia's users as Wikipedia does. Finally, the results of this study provide meaningfully practical guidance for practitioners in that which type of knowledge community is most appropriate to the fluctuated business environment as knowledge community itself evolves with time.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.685-692
• /
• 2001

This paper describes how to disambiguate the aspectual meaning of Japanese expression "-te iru" in Japanese-Korean machine translation Due to grammatical similarities of both languages, almost all Japanese- Korean MT systems have been developed under the direct MT strategy, in which the lexical disambiguation is essential to high-quality translation. Japanese has a progressive aspectual marker “-te iru" which is difficult to translate into Korean equivalents because in Korean there are two different progressive aspectual markers: "-ko issta" for "action progressive" and "-e issta" for "state progressive". Moreover, the aspectual system of both languages does not quite coincide with each other, so the Korean progressive aspect could not be determined by Japanese meaning of " te iru" alone. The progressive aspectural meaning may be parially determined by the meaning of predicates and also the semantic meaning of predicates may be partially reshicted by adverbials, so all Japanese predicates are classified into five classes : the 1nd verb is used only for "action progrssive",2nd verb generally for "action progressive" but occasionally for "state progressive", the 3rd verb only for "state progressive", the 4th verb generally for "state progressive", but occasIonally for "action progressive", and the 5th verb for the others. Some heuristic rules are defined for disambiguation of the 2nd and 4th verbs on the basis of adverbs and abverbial phrases. In an experimental evaluation using more than 15,000 sentances from "Asahi newspapers", the proposed method improved the translation quality by about 5%, which proves that it is effective in disambiguating "-te iru" for Japanese-Korean machine translation.translation quality by about 5%, which proves that it is effective in disambiguating "-te iru" for Japanese-Korean machine translation.anslation.

• Korean journal of applied entomology
• /
• v.31 no.2
• /
• pp.122-132
• /
• 1992

Experiments were conducted to establish an in vitro AChE inhibition test system to evaluate the potency of AChE inhibition of new chemical compounds. For a fixed time inhibition test, optimal inhibition (incubation) time to evaluate their AChE inhibition potency was 10 min. for AChE inhibitors such as DFP, DDVP, and paraoxon. The concentration of new chemical compounds with an ester group for evaluation of their inhibition potency was 10 $\mu$M under 10 min. preincubation conditions. However, the stepwise inhibition test with higher concentrations seemed to be needed for other chemical compounds. For a progressive inhibition test to calculate inhibition constants such as $K_d$, $K_3$ and $K_i$, extremely low $K_d(1.3\times10-^85.6\times10^{-7})$ and $K_3$(0. 21-0.27 $min^{-1}$) were observed under lagged preincubation time (0.8-13.3 min) and low in¬hibitor concentrations $(1\times10-^92\times10-^6M)$. However, this method seemed to be useful for comparison of AChE inhibition potency among inhibitors. Differences in inhibition potency among DFP, paraoxon, and KH501 were due to the differences in $K_d$, in other words, differences in affinities between inhibitors and AChEs. Therefore, AntiChE screening should consist of two steps. The first step is to evaluate the potency of AChE inhibition based on $I_50$ valuse obtained from fixed time inhibition tests. The second step is to study inhibition patterns and characteristics of chemical compounds selected in the first step.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.81-90
• /
• 2012

The effect of setup uncertainties on CTV dose and the correlation between setup uncertainties and setup margin were evaluated by Monte Carlo based numerical simulation. Patient specific information of IMRT treatment plan for rectal cancer designed on the VARIAN Eclipse planning system was utilized for the Monte Carlo simulation program including the planned dose distribution and tumor volume information of a rectal cancer patient. The simulation program was developed for the purpose of the study on Linux environment using open source packages, GNU C++ and ROOT data analysis framework. All misalignments of patient setup were assumed to follow the central limit theorem. Thus systematic and random errors were generated according to the gaussian statistics with a given standard deviation as simulation input parameter. After the setup error simulations, the change of dose in CTV volume was analyzed with the simulation result. In order to verify the conventional margin recipe, the correlation between setup error and setup margin was compared with the margin formula developed on three dimensional conformal radiation therapy. The simulation was performed total 2,000 times for each simulation input of systematic and random errors independently. The size of standard deviation for generating patient setup errors was changed from 1 mm to 10 mm with 1 mm step. In case for the systematic error the minimum dose on CTV $D_{min}^{stat{\cdot}}$ was decreased from 100.4 to 72.50% and the mean dose $\bar{D}_{syst{\cdot}}$ was decreased from 100.45% to 97.88%. However the standard deviation of dose distribution in CTV volume was increased from 0.02% to 3.33%. The effect of random error gave the same result of a reduction of mean and minimum dose to CTV volume. It was found that the minimum dose on CTV volume $D_{min}^{rand{\cdot}}$ was reduced from 100.45% to 94.80% and the mean dose to CTV $\bar{D}_{rand{\cdot}}$ was decreased from 100.46% to 97.87%. Like systematic error, the standard deviation of CTV dose ${\Delta}D_{rand}$ was increased from 0.01% to 0.63%. After calculating a size of margin for each systematic and random error the "population ratio" was introduced and applied to verify margin recipe. It was found that the conventional margin formula satisfy margin object on IMRT treatment for rectal cancer. It is considered that the developed Monte-carlo based simulation program might be useful to study for patient setup error and dose coverage in CTV volume due to variations of margin size and setup error.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Korean Journal of Agricultural Science
• /
• v.24 no.2
• /
• pp.145-155
• /
• 1997

The large scaled field test by prefabricated vertical drains was performed to evaluate the superiority of vertical discharge capacity for drain materials through compare and analyze the time-settlement behavior with drain spacing and the compression index and consolidation coefficient obtained by laboratory experiments and field monitoring system. 1. The relation of measurement settlement($S_m$) versus design settlement($S_t$) and measurement consolidation ratio($U_m$) versus design consolidation ratio($U_t$) were shown $S_m=(1.0{\sim}1.1)S_t$, $U_m=(1.13{\sim}1.17)U_t$ at 1.0m drain spacing and $S_m=(0.7{\sim}0.8)S_t$, $U_m=(0.92{\sim}0.99)U_t$ at l.5m drain spacing, respectively. 2. The relation of field compressing index($C_{cfield}$) and virgin compression index($V_{cclab.}$) was shown $C_{cfield}=(1.0{\sim}1.2)V_{cclab.}$, But it was nearly same value when considered the error with determination method of virgin compression index and prediction method of total settlement. 3. Field consolidation coefficient was larger than laboratory consolidation coefficient, and the consolidation coefficient ratio($C_h/C_v$) were $C_h=(2.4{\sim}3.0)C_v$. $C_h=(3.5{\sim}4.3)C_v$ at 1.0m and 1.5m drain spacing and increased with increasing of drain spacing. 4. The evaluation of vertical discharge capacity with drain spacing from the results of the consolidation coefficient ratio showed largely superior in case the Mebra drain and Amer drain than other drain materials at 1.0m and 1.5m drain spacing, while the values showed nearly same value in case same drain spacing.

• Korea journal of population studies
• /
• v.4 no.1
• /
• pp.105-130
• /
• 1981

This study was conducted to compare the characteristics of high performane areas for family planning with that of low performance areas and to find factors which strongly affected contraceptive practice behavior. For the study, eight areas were selected from 274 rural family planning canvassing areas of Korean Population Policy and Program Evaluation Study, which was an action study operated in all areas of Cheju Island from July 1, 1976 until December 31,1979. As a first step of the action study, Cheju Island was devided up 318 family planning canvasser areas Each area was consisted of 200 households in rural district and 300 households in urhan one Duriog the period of project, each canvassing area had been managed by a female family planning canvasser, selected by director of health center considering several individual conditions needed for family planning activities Basic activities of canvassers were to counsell all the eligihie couples in own charged area about family planning methods and also to distribute contraceptives such as condoms and oral pills. In case couples desire to accept sterilization including vasectomy and tubal-ligation, the canvassers played a linking role connecting potential client with family planning field workers. Canvassng areas shows significant differentce in performance for family planning, nevertheless they are supposed to have almost the same conditions regarding family planning distribution channel. Because the purpose of the Cheju project was to eliminate all the problems that existed in governmental distribution system, that is to remove geographic, economic, cognitive and administrative barriers Accumulated performances of family planning methods accepted by residents in each area were calculated by eligible women aged 14-49. And then canvassing areas were ranked according to performance score. Consequently, 4 areas in extremely high and low family planning performance areas were selected respectively. Major results were obtained by comparing characteristics of high performance area with that of low performance areas, which are as follows: 1. The mean number of living children was about the same both in high and low performance areas for family planning. But respondents' mean age (38.5) in high performance areas was higher than that (37.0) in low performance areas 2. Respondents' perception in the expectant educational level of others' children in high performance areas was higher than that in low performance areas, although respondents educational level, monthly expenditure and ratio of children in high school and above was not different. 3. Ratio of ownerships of TV and newspaper in high performance areas was highen than that in low performance areas 4. The duration of canvasser' charge in high performance areas was longer than that of low performance areas, showing the fact that canvassers didn't move cut in high performance areas 5. In high performance areas, canvassers' houses were relatively located in the center part of the village. And so villagers resided in near distances from the anvasser's house 6. 4H clubs' activities in high performance areas were more active than those in low performance areas Therefore it was assumed that cohesiveness of community in high performance areas were stronger than that in low areas. 7. Canvassers' family planning practice rate was higher than that in low performance areas, and also canvassers' human relationship was more sociable than that of canvassers in low performance areas. 8. Fourteen variables which showed relatively high significance level in $X^2$ and F test were selected as independent variables for stepwise regression analysis. According to the results of regression analysis. five of 14 variables-distributors education level ($R^2$=.4439), duration of distributor's charge ($R^2$=.6166), 4H club activities ($R^2$=.6697), canvasser's contraceptive practice ($R^2$=.7377) and location of distributions house ($R^2$=.8010) explained 80.1 percent of total variance.

• Journal of Life Science
• /
• v.24 no.9
• /
• pp.1030-1038
• /
• 2014

Platelet products are used to treat hemorrhagic or platelet dysfunction diseases. Plateletpheresis involves collecting the platelet components of blood using an apheresis blood-collection system. Various indicators are available for evaluating the qualities of the apheresis platelets. The productivity of platelet collection is evaluated through both the collection efficiency and collection rates. Platelet storage quality can be evaluated in vitro using several indicators, including visual appearance, metabolic activities, volume, platelet count, white blood cell count, microparticles, and various platelet activation markers. Platelet activation markers have been used as indicators of storage quality in various studies. Post-transfusion platelet quality can be evaluated based on the corrected count increment and the percentage of platelet recovery. Although various studies have investigated the aspects of plateletpheresis, no article has systemically presented assessments of the platelet products obtained from different plateletpheresis devices. The present study provides a review of plateletpheresis, including the specifics of the process, the types of devices employed, the platelet quality, the overall efficacy, and the evaluation indicator qualities. Furthermore, the differences in functionality among the different apheresis devices are discussed. Although adverse reactions to the citrate anti-coagulant have been reported, apheresis processing may provide a safer option for donors who are at a high risk for presyncopal or syncopal reactions related to whole blood collection.