• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.567-573
• /
• 2000

An analysis system for evaluating the design of dieface of stamping press dies is developed. The die design analysis system interfaced with CATIA via universal or NASTRAN data format provides the design information such as binder-wrap, punch contact status, section length change ratio, wrinkle symptom etc., which are crucial in predicting the defects of initial shape of the sheet in the dieface design stage. The graphic post-processor of developed system which displays 3-dimensional shapes of tool and die and analysis results, helps the interpretation of design evaluation. The dieface design analysis system was tested in draw dies of front floor panel and quarter panel of auto-body in order to verify the usefulness and validity of the system The examples show that the developed system would be a good tool in evaluating dieface designs.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.193-200
• /
• 2006

Any design process is interwoven with numerous intermediate design representations and information. On the other hand, designers proceed the design through various activities. It has always been a difficult task to model the design process, yet there are many significant research outputs that explain the design process through the cognitive approaches. This research started from the necessity of an interactive system which externalize the elements of design process in a visual or tangible manner. In order to do so, a design model, specifically a design process representation model was necessary to capture and represent design process. Several concepts such as design issue, design concept, and design form were defined through the empirical studies of design practices. The assumption is that the design process can be effectively captured by the presented system and it can help both designers and tutors review and analyze the design process. It should also help novice designers learn from expert designer's design process patterns. The system represents design process pattern in a interactive graphic environment. It also provides various useful features to enhance the analysis of design process. This paper presents theoretical groundwork and development process of the design process visualizer. The representation model is presented, and the application of the system is reviewed. Discussions on the further development directions include critical evaluation of the system.

• Laser Solutions
• /
• v.10 no.3
• /
• pp.15-24
• /
• 2007

In this paper laser micromachining system design process for commercialization is suggested. The constructed system design process is properly adjusted for laser micromachining area after tailoring engine process of system engineering process such as requirement analysis, functional analysis and allocation, system synthesis and system optimization process. In the current laser machining system design, system components and specifications are determined on the basis of experimental experience which a laser is being used in machining some materials as well as the current machining and research trend. In this paper, however, systematic process is suggested in addition to experimental experience, which the laser and system components and their specifications are decided in the process of definition of functional requirements and engine design variables of system to satisfy the customer's requirements.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.20-27
• /
• 2014

In view of the importance of material reduction and rational structural design due to the rapid increase in oil and steel prices, an optimized structural hybrid design system for the doubler plate of a ship's hull structure was developed. A direct design process by a structural designer was added to this developed optimized system to increase the design efficiency and provide a way of directly inserting a designer's decisions into the design system process. As the first step of the doubler design system development, the design formulas used in doubler design system were introduced. Based on the introduction of influence coefficients $K_{t_c}$ $K_{t_d}$, $K_{b_d}$ and $K_{a_d}$ according to the variations in the doubler length, breadth, doubler thickness, and average corrosion thickness of the main plate, the design formulas for an equivalent plate thickness were developed, and a hybrid design system using these formulas was suggested for the slender doubler plate of a ship structure subjected to a longitudinal in-plane compression load. By using this developed design system, a more rational doubler plate design can be expected considering the efficient reinforcement of the plate members of ship structures. Additionally, a more detailed structural analysis through local strength evaluations will be performed to verify the efficiency of the optimum structural design for the doubler plate.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.226-232
• /
• 2000

The design of agricultural facilities is the consistent activities, which systematically analyze all the actual conditions, design the unit structures, and improve the faming environment through efficient organization of the unit facility. The design of agricultural facilities is composed of site study, preliminary design, primary design, and detail design. Integrated design system can manage and process the information created by and used in all steps of design process. Formal data models of these design activities are important conceptual steps in development of integrated design system. However, most of existing models are not available for agricultural facilities. To support efficiently developing the integrated design system of agricultural facilities, we have developed the Multi-Layered Primitive-Composite mode I through object-oriented analysis of agricultural facilities. The MPC model not only satisfies the characteristics of agricultural facility, such as variety, coupling, informal data, but also improves abilities of integrated design system such as extensibility, flexibility, and granularity. The paper presents a formal definition of the MPC model.

• Korean Institute of Interior Design Journal
• /
• no.7
• /
• pp.70-78
• /
• 1996

Artificial Intelligence is generally concerned with tasks whose execution appears to involve some intelligence if done by humans, and knowledge-based system ( in other word, expert system) is the research about the specific domain. This concept also can be applied to interior design field. So the purpose of this study is in reconstructing the accomplishment of artificial Intelligence and knowledge engineering, searching basic theories and cased to knowledge engineering , searching basic theories and cases to formulate knowledge -based design system, and testing the posibilities how the design information can be dealt in computer system. Given that recognition , two major problems must be solved before knowledge-based CAD systems could be come practical : Firstly , identification of the interior of designers use .Secondly , representing this knowledge in a computationally effective manner. I had discussed the basic concepts on which to base a knowledge- based design model, knowledge representation schemes, and problem solving, I could find the possibility which the knowledge-based system can be applied to the interior design according to this study. But there are non-deductive, often irrational and now easily computerized design process in interior design. Those are problems which are relevant to the machine learning and the creativity in design. So there should be a lot of research about the machine learning and the creatively in design in order to construct successfully intelligent knowledge-based design system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.316-321
• /
• 2000

Die Casting is one of the forming methods to manufacture large number of products with short period time and clean surface by high forming pressure and temperature of cast alloy. Die design is composed of selection of cast alloy, design of die casting product, runner and gate design etc. In reality, however, die design of die casting has been performed by trial and error method, which cause economic and time loss. This paper describes a research work of developing computer-aided design of die casting product and die design. Approach to the CAD system has been written in AutoLISP on the AutoCAD with personal computer. In this study, die design system for gate of die casting process has been developed to present algorithm for automation of die design, especially runner-gate system. As forming process and die design system using 3-D geometry handling are integrated with technology of process planning, die design is possible to set. In addition, specific rules and equations for the runner-gate system have been presented to avoid too many trails and errors with expensive equipment. It is possible for engineers to make automatic and efficient die design of die casting and it will result in reduction of expense and time to be required. An example is applied to cap-shaped casting using proposed algorithm.

• Ocean Systems Engineering
• /
• v.1 no.2
• /
• pp.157-169
• /
• 2011

To provide more rational design solutions at conceptual design level, axiomatic design method has been applied to solve critical part of a new engineering problem called Mobile Harbor. In the implementation, the Mobile Harbor, a functional harbor system that consists of a vessel with container crane approaches to a container ship anchored in the open sea and establishes a secure mooring between the two vessels to carry out loading and unloading of containers. For this moving harbor system to be able to operate successfully, a reliable and safe strategy to moor and maintain constant distance between the two vessels in winds and waves is required. The design process of automatic ship-to-ship mooring system to satisfy the requirements of establishing and maintaining secure mooring has been managed using axiomatic design principles. Properly defining and disseminating Functional Requirements, clarifying interface requirements between its subsystems, and identifying potential conflict, i.e. functional coupling, at the earliest stage of design as much as possible are all part of what need to be managed in a system design project. In this paper, we discuss the automatic docking system design project under the umbrella of KAIST mobile harbor project to illustrate how the Axiomatic Design process can facilitate design projects for a large and complex engineering system. The solidified design is presented as a result.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.230-238
• /
• 2003

The configuration design of a mechanical product can be efficiently performed when it is based on the functional modeling. There are methodologies, which decompose function from the abstract level to the concrete level and match the functions to physical parts. But it is difficult to carry out an innovative design when the function is matched only to a pre-detined part. This paper describes the configuration design process of a mechanical product with a design expert system, which uses function taxonomy and TRIZ theory. The expert system can propose a functional modeling of a new part. which is not in the existing parts list. The abstraction levels of design knowledge are introduced, which describe the operation of mechanical product in the levels of abstraction. This is the theoretical background of using knowledge of function and TRIZ for configuration design. The expert system is adequate to control this design knowledge. which expresses knowledge of functional modeling, mapping rules between functions and parts, selection of parts, and TRIZ theory. The hierarchy of functions and machine parts are properly expressed by classes and objects in the expert system. A design expert system has been implemented for the configuration design of a train bogie, and a new brake system of the bogie is introduced with the aid of TRIZ's 30 function groups.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.69-75
• /
• 2001

Systems engineering has been utilized in system development primarily for large-scale projects or commercial large-scale systems during the last several decades. We can understand why it would be useful to apply systems engineering to the development of a relatively small system. However, it is difficult to effectively carry out a project due to the complexity in applying the methods of systems engineering. To apply systems engineering to the development of a small system, the system engineering processes should be tailored. We established a requirements driven system design process(RDSDP) that can effectively carry out the system design far a small system. RDSDP is a system design process that treats all the requirements thoroughly and effectively. This is applied by the designer according to a standardized and systematized process during the first phase in design, in which system specifications are made. By using RDSDP, we can affect a reduction of the number of redesign phases in the process of the system design, shorten the period for to make specification, which will then cause the system to succeed in the actual application.